From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Trung Nguyen <trungnh@cystack.net>,
Benjamin Tissoires <bentiss@kernel.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.10.y 2/2] HID: multitouch: fix out-of-bounds bit access on mt_io_flags
Date: Fri, 17 Jul 2026 14:11:33 -0400 [thread overview]
Message-ID: <20260717181133.2086215-2-sashal@kernel.org> (raw)
In-Reply-To: <20260717181133.2086215-1-sashal@kernel.org>
From: Trung Nguyen <trungnh@cystack.net>
[ Upstream commit 8813b0612275cc61fe9e6603d0ee019247ade6be ]
mt_io_flags is a single unsigned long, but mt_process_slot(),
mt_release_pending_palms() and mt_release_contacts() use it as a
per-slot bitmap indexed by the slot number. That slot number is only
bounded by td->maxcontacts, which is taken from the device's
ContactCountMaximum feature report and can be up to 255, not by
BITS_PER_LONG.
As a result, a multitouch device that advertises a large contact count
makes set_bit()/clear_bit() operate past the mt_io_flags word and
corrupt the adjacent members of struct mt_device. The sticky-fingers
release timer is the easiest way to reach this. mt_release_contacts()
runs
for (i = 0; i < mt->num_slots; i++)
clear_bit(i, &td->mt_io_flags);
with num_slots == maxcontacts. For maxcontacts around 250 the loop
clears the bits that overlap td->applications.next, zeroing that list
head, and the list_for_each_entry() that immediately follows then
dereferences NULL. The kernel panics from timer (softirq) context. On a
KASAN build this shows up as a general protection fault in
mt_release_contacts() with a null-ptr-deref at offset 0x58, which is
offsetof(struct mt_application, num_received).
The state is reachable from an untrusted USB or Bluetooth HID
multitouch device; no local privileges are required.
Store the per-slot active state in a separately allocated bitmap sized
for maxcontacts, the same pattern already used for pending_palm_slots,
and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two
"mt_io_flags & MT_IO_SLOTS_MASK" arming checks become
bitmap_empty(td->active_slots, td->maxcontacts).
Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the
same commit to leave the low byte for the slot bits; with the slot bits
gone it fits in bit 0 again, which also keeps it within the unsigned
long on 32-bit.
Fixes: 46f781e0d151 ("HID: multitouch: fix sticky fingers")
Cc: stable@vger.kernel.org
Signed-off-by: Trung Nguyen <trungnh@cystack.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-multitouch.c | 32 ++++++++++++++++++++------------
1 file changed, 20 insertions(+), 12 deletions(-)
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index c3bcc23d7c7ca1..e4b91c0866bb98 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -31,6 +31,7 @@
* [1] https://gitlab.freedesktop.org/libevdev/hid-tools
*/
+#include <linux/bitmap.h>
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
@@ -81,8 +82,7 @@ enum latency_mode {
HID_LATENCY_HIGH = 1,
};
-#define MT_IO_SLOTS_MASK GENMASK(7, 0) /* reserve first 8 bits for slot tracking */
-#define MT_IO_FLAGS_RUNNING 32
+#define MT_IO_FLAGS_RUNNING 0
static const bool mtrue = true; /* default for true */
static const bool mfalse; /* default for false */
@@ -158,10 +158,9 @@ struct mt_device {
struct mt_class mtclass; /* our mt device class */
struct timer_list release_timer; /* to release sticky fingers */
struct hid_device *hdev; /* hid_device we're attached to */
- unsigned long mt_io_flags; /* mt flags (MT_IO_FLAGS_RUNNING)
- * first 8 bits are reserved for keeping the slot
- * states, this is fine because we only support up
- * to 250 slots (MT_MAX_MAXCONTACT)
+ unsigned long mt_io_flags; /* mt flags (MT_IO_FLAGS_RUNNING) */
+ unsigned long *active_slots; /* bitmap of slots with an active
+ * contact, sized for maxcontacts
*/
__u8 inputmode_value; /* InputMode HID feature value */
__u8 maxcontacts;
@@ -915,7 +914,7 @@ static void mt_release_pending_palms(struct mt_device *td,
for_each_set_bit(slotnum, app->pending_palm_slots, td->maxcontacts) {
clear_bit(slotnum, app->pending_palm_slots);
- clear_bit(slotnum, &td->mt_io_flags);
+ clear_bit(slotnum, td->active_slots);
input_mt_slot(input, slotnum);
input_mt_report_slot_inactive(input);
@@ -1100,9 +1099,9 @@ static int mt_process_slot(struct mt_device *td, struct input_dev *input,
input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
- set_bit(slotnum, &td->mt_io_flags);
+ set_bit(slotnum, td->active_slots);
} else {
- clear_bit(slotnum, &td->mt_io_flags);
+ clear_bit(slotnum, td->active_slots);
}
return 0;
@@ -1237,7 +1236,7 @@ static void mt_touch_report(struct hid_device *hid,
* defect.
*/
if (app->quirks & MT_QUIRK_STICKY_FINGERS) {
- if (td->mt_io_flags & MT_IO_SLOTS_MASK)
+ if (!bitmap_empty(td->active_slots, td->maxcontacts))
mod_timer(&td->release_timer,
jiffies + msecs_to_jiffies(100));
else
@@ -1277,6 +1276,15 @@ static int mt_touch_input_configured(struct hid_device *hdev,
if (td->is_buttonpad)
__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+ if (!td->active_slots) {
+ td->active_slots = devm_kcalloc(&td->hdev->dev,
+ BITS_TO_LONGS(td->maxcontacts),
+ sizeof(long),
+ GFP_KERNEL);
+ if (!td->active_slots)
+ return -ENOMEM;
+ }
+
app->pending_palm_slots = devm_kcalloc(&hi->input->dev,
BITS_TO_LONGS(td->maxcontacts),
sizeof(long),
@@ -1655,7 +1663,7 @@ static void mt_release_contacts(struct hid_device *hid)
for (i = 0; i < mt->num_slots; i++) {
input_mt_slot(input_dev, i);
input_mt_report_slot_inactive(input_dev);
- clear_bit(i, &td->mt_io_flags);
+ clear_bit(i, td->active_slots);
}
input_mt_sync_frame(input_dev);
input_sync(input_dev);
@@ -1678,7 +1686,7 @@ static void mt_expired_timeout(struct timer_list *t)
*/
if (test_and_set_bit_lock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags))
return;
- if (td->mt_io_flags & MT_IO_SLOTS_MASK)
+ if (!bitmap_empty(td->active_slots, td->maxcontacts))
mt_release_contacts(hdev);
clear_bit_unlock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags);
}
--
2.53.0
prev parent reply other threads:[~2026-07-17 18:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-14 14:54 FAILED: patch "[PATCH] HID: multitouch: fix out-of-bounds bit access on mt_io_flags" failed to apply to 5.10-stable tree gregkh
2026-07-17 18:11 ` [PATCH 5.10.y 1/2] HID: add haptics page defines Sasha Levin
2026-07-17 18:11 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260717181133.2086215-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=bentiss@kernel.org \
--cc=stable@vger.kernel.org \
--cc=trungnh@cystack.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox