From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Zhang Cen <rollkingzzc@gmail.com>,
Han Guidong <2045gemini@gmail.com>,
John Fastabend <john.fastabend@gmail.com>,
Emil Tsalapatis <emil@etsalapatis.com>,
Kuniyuki Iwashima <kuniyu@google.com>,
Jiayuan Chen <jiayuan.chen@linux.dev>,
Alexei Starovoitov <ast@kernel.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.10.y 2/2] bpf, sockmap: keep sk_msg copy state in sync
Date: Sat, 18 Jul 2026 11:20:05 -0400 [thread overview]
Message-ID: <20260718152005.3278231-2-sashal@kernel.org> (raw)
In-Reply-To: <20260718152005.3278231-1-sashal@kernel.org>
From: Zhang Cen <rollkingzzc@gmail.com>
[ Upstream commit 2ccbc9a3874620c9623419034f572e4507c33e4f ]
SK_MSG uses msg->sg.copy as per-scatterlist-entry provenance. Entries
with this bit set are copied before data/data_end are exposed to SK_MSG
BPF programs for direct packet access.
bpf_msg_pull_data(), bpf_msg_push_data(), and bpf_msg_pop_data()
rewrite the sk_msg scatterlist ring by collapsing, splitting, and
shifting entries. These operations move msg->sg.data[] entries, but the
parallel copy bitmap can be left behind on the old slot. A copied entry
can then return to msg->sg.start with its copy bit clear and be exposed
as directly writable packet data.
This corruption path requires an attached SK_MSG BPF program that calls
the mutating helpers; ordinary sockmap/TLS traffic that never runs
push/pop/pull helper sequences is not affected.
Keep msg->sg.copy synchronized with scatterlist entry moves, preserve
the copy bit when an entry is split, clear it when a helper replaces an
entry with a private page, and clear slots vacated by pull-data
compaction.
Fixes: 015632bb30da ("bpf: sk_msg program helper bpf_sk_msg_pull_data")
Fixes: 6fff607e2f14 ("bpf: sk_msg program helper bpf_msg_push_data")
Fixes: 7246d8ed4dcc ("bpf: helper to pop data from messages")
Cc: stable@vger.kernel.org
Co-developed-by: Han Guidong <2045gemini@gmail.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Han Guidong <2045gemini@gmail.com>
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260615021959.140010-4-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/core/filter.c | 88 ++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 83 insertions(+), 5 deletions(-)
diff --git a/net/core/filter.c b/net/core/filter.c
index 878b79529a006f..4635060f8b9b91 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2639,6 +2639,38 @@ static void sk_msg_reset_curr(struct sk_msg *msg)
}
}
+static bool sk_msg_elem_is_copy(const struct sk_msg *msg, u32 i)
+{
+ return test_bit(i, msg->sg.copy);
+}
+
+static void sk_msg_clear_elem_copy(struct sk_msg *msg, u32 i)
+{
+ __clear_bit(i, msg->sg.copy);
+}
+
+static void sk_msg_set_elem_copy(struct sk_msg *msg, u32 i)
+{
+ __set_bit(i, msg->sg.copy);
+}
+
+static void sk_msg_clear_copy_range(struct sk_msg *msg, u32 start, u32 end)
+{
+ while (start != end) {
+ sk_msg_clear_elem_copy(msg, start);
+ sk_msg_iter_var_next(start);
+ }
+}
+
+static void sk_msg_sg_move(struct sk_msg *msg, u32 dst, u32 src)
+{
+ msg->sg.data[dst] = msg->sg.data[src];
+ if (sk_msg_elem_is_copy(msg, src))
+ sk_msg_set_elem_copy(msg, dst);
+ else
+ sk_msg_clear_elem_copy(msg, dst);
+}
+
static const struct bpf_func_proto bpf_msg_cork_bytes_proto = {
.func = bpf_msg_cork_bytes,
.gpl_only = false,
@@ -2677,7 +2709,7 @@ BPF_CALL_4(bpf_msg_pull_data, struct sk_msg *, msg, u32, start,
* account for the headroom.
*/
bytes_sg_total = start - offset + bytes;
- if (!test_bit(i, msg->sg.copy) && bytes_sg_total <= len)
+ if (!sk_msg_elem_is_copy(msg, i) && bytes_sg_total <= len)
goto out;
/* At this point we need to linearize multiple scatterlist
@@ -2723,6 +2755,7 @@ BPF_CALL_4(bpf_msg_pull_data, struct sk_msg *, msg, u32, start,
} while (i != last_sge);
sg_set_page(&msg->sg.data[first_sge], page, copy, 0);
+ sk_msg_clear_elem_copy(msg, first_sge);
/* To repair sg ring we need to shift entries. If we only
* had a single entry though we can just replace it and
@@ -2732,8 +2765,14 @@ BPF_CALL_4(bpf_msg_pull_data, struct sk_msg *, msg, u32, start,
shift = last_sge > first_sge ?
last_sge - first_sge - 1 :
NR_MSG_FRAG_IDS - first_sge + last_sge - 1;
- if (!shift)
+ if (!shift) {
+ sk_msg_clear_elem_copy(msg, msg->sg.end);
goto out;
+ }
+
+ i = first_sge;
+ sk_msg_iter_var_next(i);
+ sk_msg_clear_copy_range(msg, i, last_sge);
i = first_sge;
sk_msg_iter_var_next(i);
@@ -2747,16 +2786,18 @@ BPF_CALL_4(bpf_msg_pull_data, struct sk_msg *, msg, u32, start,
if (move_from == msg->sg.end)
break;
- msg->sg.data[i] = msg->sg.data[move_from];
+ sk_msg_sg_move(msg, i, move_from);
msg->sg.data[move_from].length = 0;
msg->sg.data[move_from].page_link = 0;
msg->sg.data[move_from].offset = 0;
+ sk_msg_clear_elem_copy(msg, move_from);
sk_msg_iter_var_next(i);
} while (1);
msg->sg.end = msg->sg.end - shift > msg->sg.end ?
msg->sg.end - shift + NR_MSG_FRAG_IDS :
msg->sg.end - shift;
+ sk_msg_clear_elem_copy(msg, msg->sg.end);
out:
sk_msg_reset_curr(msg);
msg->data = sg_virt(&msg->sg.data[first_sge]) + start - offset;
@@ -2777,8 +2818,10 @@ static const struct bpf_func_proto bpf_msg_pull_data_proto = {
BPF_CALL_4(bpf_msg_push_data, struct sk_msg *, msg, u32, start,
u32, len, u64, flags)
{
+ bool sge_copy = false, nsge_copy = false, nnsge_copy = false;
struct scatterlist sge, nsge, nnsge, rsge = {0}, *psge;
u32 new, i = 0, l = 0, space, copy = 0, offset = 0;
+ bool rsge_copy = false;
u8 *raw, *to, *from;
struct page *page;
@@ -2851,6 +2894,7 @@ BPF_CALL_4(bpf_msg_push_data, struct sk_msg *, msg, u32, start,
sk_msg_iter_var_prev(i);
psge = sk_msg_elem(msg, i);
rsge = sk_msg_elem_cpy(msg, i);
+ rsge_copy = sk_msg_elem_is_copy(msg, i);
psge->length = start - offset;
rsge.length -= psge->length;
@@ -2876,23 +2920,34 @@ BPF_CALL_4(bpf_msg_push_data, struct sk_msg *, msg, u32, start,
/* Shift one or two slots as needed */
sge = sk_msg_elem_cpy(msg, new);
sg_unmark_end(&sge);
+ sge_copy = sk_msg_elem_is_copy(msg, new);
nsge = sk_msg_elem_cpy(msg, i);
+ nsge_copy = sk_msg_elem_is_copy(msg, i);
if (rsge.length) {
sk_msg_iter_var_next(i);
nnsge = sk_msg_elem_cpy(msg, i);
+ nnsge_copy = sk_msg_elem_is_copy(msg, i);
sk_msg_iter_next(msg, end);
}
while (i != msg->sg.end) {
msg->sg.data[i] = sge;
+ if (sge_copy)
+ sk_msg_set_elem_copy(msg, i);
+ else
+ sk_msg_clear_elem_copy(msg, i);
sge = nsge;
+ sge_copy = nsge_copy;
sk_msg_iter_var_next(i);
if (rsge.length) {
nsge = nnsge;
+ nsge_copy = nnsge_copy;
nnsge = sk_msg_elem_cpy(msg, i);
+ nnsge_copy = sk_msg_elem_is_copy(msg, i);
} else {
nsge = sk_msg_elem_cpy(msg, i);
+ nsge_copy = sk_msg_elem_is_copy(msg, i);
}
}
@@ -2900,13 +2955,18 @@ BPF_CALL_4(bpf_msg_push_data, struct sk_msg *, msg, u32, start,
/* Place newly allocated data buffer */
sk_mem_charge(msg->sk, len);
msg->sg.size += len;
- __clear_bit(new, msg->sg.copy);
+ sk_msg_clear_elem_copy(msg, new);
sg_set_page(&msg->sg.data[new], page, len + copy, 0);
if (rsge.length) {
get_page(sg_page(&rsge));
sk_msg_iter_var_next(new);
msg->sg.data[new] = rsge;
+ if (rsge_copy)
+ sk_msg_set_elem_copy(msg, new);
+ else
+ sk_msg_clear_elem_copy(msg, new);
}
+ sk_msg_clear_elem_copy(msg, msg->sg.end);
sk_msg_reset_curr(msg);
sk_msg_compute_data_pointers(msg);
@@ -2932,27 +2992,38 @@ static void sk_msg_shift_left(struct sk_msg *msg, int i)
do {
prev = i;
sk_msg_iter_var_next(i);
- msg->sg.data[prev] = msg->sg.data[i];
+ sk_msg_sg_move(msg, prev, i);
} while (i != msg->sg.end);
sk_msg_iter_prev(msg, end);
+ sk_msg_clear_elem_copy(msg, msg->sg.end);
}
static void sk_msg_shift_right(struct sk_msg *msg, int i)
{
struct scatterlist tmp, sge;
+ bool tmp_copy, sge_copy;
sk_msg_iter_next(msg, end);
sge = sk_msg_elem_cpy(msg, i);
+ sge_copy = sk_msg_elem_is_copy(msg, i);
sk_msg_iter_var_next(i);
tmp = sk_msg_elem_cpy(msg, i);
+ tmp_copy = sk_msg_elem_is_copy(msg, i);
while (i != msg->sg.end) {
msg->sg.data[i] = sge;
+ if (sge_copy)
+ sk_msg_set_elem_copy(msg, i);
+ else
+ sk_msg_clear_elem_copy(msg, i);
sk_msg_iter_var_next(i);
sge = tmp;
+ sge_copy = tmp_copy;
tmp = sk_msg_elem_cpy(msg, i);
+ tmp_copy = sk_msg_elem_is_copy(msg, i);
}
+ sk_msg_clear_elem_copy(msg, msg->sg.end);
}
BPF_CALL_4(bpf_msg_pop_data, struct sk_msg *, msg, u32, start,
@@ -3009,8 +3080,10 @@ BPF_CALL_4(bpf_msg_pop_data, struct sk_msg *, msg, u32, start,
*/
if (start != offset) {
struct scatterlist *nsge, *sge = sk_msg_elem(msg, i);
+ bool sge_copy = sk_msg_elem_is_copy(msg, i);
int a = start - offset;
int b = sge->length - pop - a;
+ u32 sge_idx = i;
sk_msg_iter_var_next(i);
@@ -3023,6 +3096,10 @@ BPF_CALL_4(bpf_msg_pop_data, struct sk_msg *, msg, u32, start,
sg_set_page(nsge,
sg_page(sge),
b, sge->offset + pop + a);
+ if (sge_copy)
+ sk_msg_set_elem_copy(msg, i);
+ else
+ sk_msg_clear_elem_copy(msg, i);
} else {
struct page *page, *orig;
u8 *to, *from;
@@ -3039,6 +3116,7 @@ BPF_CALL_4(bpf_msg_pop_data, struct sk_msg *, msg, u32, start,
memcpy(to, from, a);
memcpy(to + a, from + a + pop, b);
sg_set_page(sge, page, a + b, 0);
+ sk_msg_clear_elem_copy(msg, sge_idx);
put_page(orig);
}
pop = 0;
--
2.53.0
prev parent reply other threads:[~2026-07-18 15:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-14 15:54 FAILED: patch "[PATCH] bpf, sockmap: keep sk_msg copy state in sync" failed to apply to 5.10-stable tree gregkh
2026-07-18 15:20 ` [PATCH 5.10.y 1/2] skmsg: convert struct sk_msg_sg::copy to a bitmap Sasha Levin
2026-07-18 15:20 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260718152005.3278231-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=2045gemini@gmail.com \
--cc=ast@kernel.org \
--cc=emil@etsalapatis.com \
--cc=jiayuan.chen@linux.dev \
--cc=john.fastabend@gmail.com \
--cc=kuniyu@google.com \
--cc=rollkingzzc@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox