From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Thorsten Blum <thorsten.blum@linux.dev>,
Ard Biesheuvel <ardb@kernel.org>,
Herbert Xu <herbert@gondor.apana.org.au>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.6.y 2/2] crypto: atmel-sha204a - drop hwrng quality reduction for ATSHA204A
Date: Mon, 20 Jul 2026 09:30:26 -0400 [thread overview]
Message-ID: <20260720133026.1149181-2-sashal@kernel.org> (raw)
In-Reply-To: <20260720133026.1149181-1-sashal@kernel.org>
From: Thorsten Blum <thorsten.blum@linux.dev>
[ Upstream commit ea5e57cc97185329dcc5ebdcaae7e1500bf0ad0b ]
Commit 8006aff15516 ("crypto: atmel-sha204a - Set hwrng quality to
lowest possible") reduced the hwrng quality to 1 based on a review by
Bill Cox [1]. However, despite its title, the review only tested the
ATSHA204, not the ATSHA204A.
In the same thread, Atmel engineer Landon Cox wrote "this behavior has
been eliminated entirely"[2] in the ATSHA204A and "this problem does not
affect the ATECC108 or the ATECC108A (or the ATSHA204A)"[3].
According to the official ATSHA204A datasheet [4], the device contains a
high-quality hardware RNG that combines its output with an internal seed
value stored in EEPROM or SRAM to generate random numbers. The device
also implements all security functions using SHA-256, and the driver
uses the chip's Random command in seed-update mode.
Keep 'quality = 1' for ATSHA204, but drop the explicit hwrng quality
reduction for ATSHA204A and fall back to the hwrng core default.
[1] https://www.metzdowd.com/pipermail/cryptography/2014-December/023858.html
[2] https://www.metzdowd.com/pipermail/cryptography/2014-December/023852.html
[3] https://www.metzdowd.com/pipermail/cryptography/2014-December/023886.html
[4] https://ww1.microchip.com/downloads/en/DeviceDoc/ATSHA204A-Data-Sheet-40002025A.pdf
Fixes: 8006aff15516 ("crypto: atmel-sha204a - Set hwrng quality to lowest possible")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/atmel-sha204a.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/crypto/atmel-sha204a.c b/drivers/crypto/atmel-sha204a.c
index b4bb35eb4a4b4b..c6161c91ecfc49 100644
--- a/drivers/crypto/atmel-sha204a.c
+++ b/drivers/crypto/atmel-sha204a.c
@@ -18,6 +18,12 @@
#include <linux/workqueue.h>
#include "atmel-i2c.h"
+/*
+ * According to review by Bill Cox [1], the ATSHA204 has very low entropy.
+ * [1] https://www.metzdowd.com/pipermail/cryptography/2014-December/023858.html
+ */
+static const unsigned short atsha204_quality = 1;
+
static void atmel_sha204a_rng_done(struct atmel_i2c_work_data *work_data,
void *areq, int status)
{
@@ -95,6 +101,7 @@ static int atmel_sha204a_rng_read(struct hwrng *rng, void *data, size_t max,
static int atmel_sha204a_probe(struct i2c_client *client)
{
struct atmel_i2c_client_priv *i2c_priv;
+ const unsigned short *quality;
int ret;
ret = atmel_i2c_probe(client);
@@ -108,11 +115,9 @@ static int atmel_sha204a_probe(struct i2c_client *client)
i2c_priv->hwrng.name = dev_name(&client->dev);
i2c_priv->hwrng.read = atmel_sha204a_rng_read;
- /*
- * According to review by Bill Cox [1], this HWRNG has very low entropy.
- * [1] https://www.metzdowd.com/pipermail/cryptography/2014-December/023858.html
- */
- i2c_priv->hwrng.quality = 1;
+ quality = i2c_get_match_data(client);
+ if (quality)
+ i2c_priv->hwrng.quality = *quality;
ret = devm_hwrng_register(&client->dev, &i2c_priv->hwrng);
if (ret)
@@ -132,14 +137,14 @@ static void atmel_sha204a_remove(struct i2c_client *client)
}
static const struct of_device_id atmel_sha204a_dt_ids[] __maybe_unused = {
- { .compatible = "atmel,atsha204", },
+ { .compatible = "atmel,atsha204", .data = &atsha204_quality },
{ .compatible = "atmel,atsha204a", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_sha204a_dt_ids);
static const struct i2c_device_id atmel_sha204a_id[] = {
- { "atsha204" },
+ { "atsha204", (kernel_ulong_t)&atsha204_quality },
{ "atsha204a" },
{ /* sentinel */ }
};
--
2.53.0
prev parent reply other threads:[~2026-07-20 13:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-15 10:10 FAILED: patch "[PATCH] crypto: atmel-sha204a - drop hwrng quality reduction for" failed to apply to 6.6-stable tree gregkh
2026-07-20 13:30 ` [PATCH 6.6.y 1/2] crypto: atmel - Drop explicit initialization of struct i2c_device_id::driver_data to 0 Sasha Levin
2026-07-20 13:30 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260720133026.1149181-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=ardb@kernel.org \
--cc=herbert@gondor.apana.org.au \
--cc=stable@vger.kernel.org \
--cc=thorsten.blum@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox