Linux kernel -stable discussions
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: socketcan@hartkopp.net,mkl@pengutronix.de
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] can: bcm: track a single source interface for ANYDEV" failed to apply to 5.15-stable tree
Date: Mon, 20 Jul 2026 17:14:20 +0200	[thread overview]
Message-ID: <2026072020-crepe-unworldly-1d53@gregkh> (raw)


The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 2f5976f54a04e9f18b25283036ac3136be453b17
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026072020-crepe-unworldly-1d53@gregkh' --subject-prefix 'PATCH 5.15.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 2f5976f54a04e9f18b25283036ac3136be453b17 Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Tue, 14 Jul 2026 18:55:33 +0200
Subject: [PATCH] can: bcm: track a single source interface for ANYDEV
 timeout/throttle ops

An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or
throttle timer has no defined semantics when matching frames arrive
from several interfaces: bcm_rx_handler() can run concurrently for
the same op on different CPUs, racing hrtimer_cancel()/
bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing
spurious RX_TIMEOUT notifications and last_frames corruption. The
same concurrency lets throttled multiplex frames from different
interfaces clobber the single rx_ifindex/rx_stamp fields shared by
the op.

Add op->if_detected to track the first interface that delivers a
matching frame while a timeout/throttle timer is configured, and
reject frames from any other interface for that op. The claim is
decided in bcm_rx_handler() before hrtimer_cancel() touches
op->timer, so a rejected frame can never disturb the claimed
interface's watchdog. RTR-mode ops are excluded via RX_RTR_FRAME,
independent of kt_ival1/kt_ival2, since those may briefly hold a
stale value from an earlier non-RTR configuration.

The claim is released in bcm_notify() on NETDEV_UNREGISTER and in
bcm_rx_setup() when SETTIMER reconfigures the timer values.

A (re-)claim is only possible on CAN devices in NETREG_REGISTERED
dev->reg_state to cover the release in bcm_notify() where reg_state
becomes NETREG_UNREGISTERING until synchronize_net().

Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/linux-can/20260709105031.1A39C1F000E9@smtp.kernel.org/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-11-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

diff --git a/net/can/bcm.c b/net/can/bcm.c
index f213a0b37791..3d637a1e0ac1 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -117,6 +117,7 @@ struct bcm_op {
 	struct hrtimer timer, thrtimer;
 	ktime_t rx_stamp, kt_ival1, kt_ival2, kt_lastmsg;
 	int rx_ifindex;
+	int if_detected; /* first received ifindex in ANYDEV rx_op mode */
 	int cfsiz;
 	u32 count;
 	u32 nframes;
@@ -797,6 +798,33 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
 			return;
 	}
 
+	/* An ANYDEV op with an active RX timeout and/or throttle timer
+	 * tracks a single source interface: claim the first interface that
+	 * delivers a matching frame and reject frames from any other one,
+	 * before hrtimer_cancel() below can touch op->timer - this avoids
+	 * racing bcm_rx_timeout_handler() across concurrent interfaces.
+	 * RX_RTR_FRAME ops are excluded, as kt_ival1/kt_ival2 may briefly
+	 * hold a stale value from an earlier non-RTR configuration.
+	 */
+	if (!op->ifindex) {
+		spin_lock_bh(&op->bcm_rx_update_lock);
+
+		if (!(op->flags & RX_RTR_FRAME) &&
+		    (op->kt_ival1 || op->kt_ival2)) {
+			/* don't claim to vanishing interface */
+			if (!op->if_detected &&
+			    READ_ONCE(skb->dev->reg_state) == NETREG_REGISTERED)
+				op->if_detected = skb->dev->ifindex;
+
+			if (op->if_detected != skb->dev->ifindex) {
+				spin_unlock_bh(&op->bcm_rx_update_lock);
+				return;
+			}
+		}
+
+		spin_unlock_bh(&op->bcm_rx_update_lock);
+	}
+
 	/* disable timeout */
 	hrtimer_cancel(&op->timer);
 
@@ -831,10 +859,9 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
 			traffic_flags |= RX_OWN;
 	}
 
-	/* save rx timestamp and originator for recvfrom() under lock.
-	 * For an op subscribed on all interfaces (ifindex == 0)
-	 * bcm_rx_handler() can run concurrently on different CPUs so
-	 * the CAN content and the meta data must be bundled correctly.
+	/* save rx timestamp and originator for recvfrom() under lock: an
+	 * ANYDEV op without an active timer can still run concurrently on
+	 * different CPUs, so content and meta data must be bundled here.
 	 */
 	op->rx_stamp = skb->tstamp;
 	op->rx_ifindex = skb->dev->ifindex;
@@ -1369,6 +1396,7 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 			op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1);
 			op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2);
 			op->kt_lastmsg = 0;
+			op->if_detected = 0; /* reclaim ifindex in ANYDEV mode */
 		}
 		spin_unlock_bh(&op->bcm_rx_update_lock);
 
@@ -1775,10 +1803,21 @@ static void bcm_notify(struct bcm_sock *bo, unsigned long msg,
 		lock_sock(sk);
 
 		/* rx_ops: remove device specific receive entries */
-		list_for_each_entry(op, &bo->rx_ops, list)
+		list_for_each_entry(op, &bo->rx_ops, list) {
 			if (op->rx_reg_dev == dev)
 				bcm_rx_unreg(dev, op);
 
+			/* release an ANYDEV op's claim (see bcm_rx_handler())
+			 * on this now confirmed-gone interface.
+			 */
+			if (!op->ifindex) {
+				spin_lock_bh(&op->bcm_rx_update_lock);
+				if (op->if_detected == dev->ifindex)
+					op->if_detected = 0;
+				spin_unlock_bh(&op->bcm_rx_update_lock);
+			}
+		}
+
 		/* tx_ops: stop device specific cyclic transmissions on the
 		 * vanishing ifindex. Cancelling the timer is enough to stop
 		 * cyclic bcm_can_tx() calls as there is no re-arming.


             reply	other threads:[~2026-07-20 15:15 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-20 15:14 gregkh [this message]
2026-07-24  8:37 ` [PATCH 9/9] can: bcm: track a single source interface for ANYDEV timeout/throttle ops Oliver Hartkopp

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2026072020-crepe-unworldly-1d53@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=mkl@pengutronix.de \
    --cc=socketcan@hartkopp.net \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox