From: <gregkh@linuxfoundation.org>
To: sj@kernel.org,akpm@linux-foundation.org,stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] mm/damon/core: always put unsuccessfully committed target" failed to apply to 6.12-stable tree
Date: Mon, 20 Jul 2026 16:28:31 +0200 [thread overview]
Message-ID: <2026072031-shingle-buddy-1bbb@gregkh> (raw)
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 6a66c557a2ab2609575bafd15e093669c05f9711
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026072031-shingle-buddy-1bbb@gregkh' --subject-prefix 'PATCH 6.12.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6a66c557a2ab2609575bafd15e093669c05f9711 Mon Sep 17 00:00:00 2001
From: SeongJae Park <sj@kernel.org>
Date: Thu, 4 Jun 2026 18:38:48 -0700
Subject: [PATCH] mm/damon/core: always put unsuccessfully committed target
pids
damon_commit_target() puts and gets the destination and the source target
pids. It puts the destination target pid because it will be overwritten
by the source target pid. It gets the source pid because the caller is
supposed to eventually put the pids. In more detail, the caller will call
damon_destroy_ctx() after damon_commit_ctx() to destroy the entire source
context. And in this case, [f]vaddr operation set's cleanup_target()
callback will put the pids.
The commit operation is made at the context level. The operation can fail
in multiple places including in the middle and after the targets commit
operations. For any such failures, immediately the error is returned to
the damon_commit_ctx() caller. If some or all of the source target pids
were committed to the destination during the unsuccessful context commit
attempt, those pids should be put twice.
The source context will do the put operations using the above explained
routine. However, let's suppose the destination context was not
originally using [f]vaddr operation set and the commit failed before the
ops of the source context is committed. The destination does not have the
cleanup_target() ops callback, so it cannot put the pids via the
damon_destroy_ctx().
As a result, the pids are leaked. The issue in the real world would be
not very common. The commit feature is for changing parameters of running
DAMON context while inheriting internal status like the monitoring
results. The monitoring results of a physical address range ain't have
things that are beneficial to be inherited to a virtual address ranges
monitoring. So the problem-causing DAMON control would be not very common
in the real world. That said, it is a supported feature. And
damon_commit_target() failure due to memory allocation is relatively
realistic [1] if there are a huge number of target regions.
Fix by putting the pids in the commit operation in case of the failures.
The issue was discovered [2] by Sashiko.
Link: https://lore.kernel.org/20260605013849.83750-1-sj@kernel.org
Link: https://lore.kernel.org/20260603112306.58490-1-akinobu.mita@gmail.com [1]
Link: https://lore.kernel.org/20260320020056.835-1-sj@kernel.org [2]
Fixes: 83dc7bbaecae ("mm/damon/sysfs: use damon_commit_ctx()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.11.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
diff --git a/mm/damon/core.c b/mm/damon/core.c
index 265d51ade25b..7e4b9affc5b0 100644
--- a/mm/damon/core.c
+++ b/mm/damon/core.c
@@ -1387,10 +1387,36 @@ static int damon_commit_target(
return 0;
}
+/*
+ * damon_revert_target_commits() - revert unsuccessful target commits.
+ * @dst: Commit destination context
+ * @failed: Commit failed destination target
+ * @src: Commit source context
+ *
+ * Revert target states that changed by damon_commit_target(), and cannot be
+ * cleaned up by the destination context's ops.cleanup_target().
+ */
+static void damon_revert_target_commits(struct damon_ctx *dst,
+ struct damon_target *failed, struct damon_ctx *src)
+{
+ struct damon_target *target;
+
+ if (!damon_target_has_pid(src))
+ return;
+ if (dst->ops.cleanup_target)
+ return;
+ damon_for_each_target(target, dst) {
+ if (target == failed)
+ return;
+ put_pid(target->pid);
+ }
+}
+
static int damon_commit_targets(
struct damon_ctx *dst, struct damon_ctx *src)
{
struct damon_target *dst_target, *next, *src_target, *new_target;
+ struct damon_target *failed;
int i = 0, j = 0, err;
damon_for_each_target_safe(dst_target, next, dst) {
@@ -1404,8 +1430,10 @@ static int damon_commit_targets(
dst_target, damon_target_has_pid(dst),
src_target, damon_target_has_pid(src),
src->min_region_sz);
- if (err)
- return err;
+ if (err) {
+ failed = dst_target;
+ goto out;
+ }
} else {
struct damos *s;
@@ -1419,25 +1447,34 @@ static int damon_commit_targets(
}
}
+ failed = NULL;
damon_for_each_target_safe(src_target, next, src) {
if (j++ < i)
continue;
/* target to remove has no matching dst */
- if (src_target->obsolete)
- return -EINVAL;
+ if (src_target->obsolete) {
+ err = -EINVAL;
+ goto out;
+ }
new_target = damon_new_target();
- if (!new_target)
- return -ENOMEM;
+ if (!new_target) {
+ err = -ENOMEM;
+ goto out;
+ }
err = damon_commit_target(new_target, false,
src_target, damon_target_has_pid(src),
src->min_region_sz);
if (err) {
damon_destroy_target(new_target, NULL);
- return err;
+ goto out;
}
damon_add_target(dst, new_target);
}
return 0;
+
+out:
+ damon_revert_target_commits(dst, failed, src);
+ return err;
}
static void damon_commit_filter(struct damon_filter *dst,
@@ -1571,8 +1608,10 @@ int damon_commit_ctx(struct damon_ctx *dst, struct damon_ctx *src)
*/
if (!damon_attrs_equals(&dst->attrs, &src->attrs)) {
err = damon_set_attrs(dst, &src->attrs);
- if (err)
+ if (err) {
+ damon_revert_target_commits(dst, NULL, src);
return err;
+ }
}
dst->pause = src->pause;
dst->ops = src->ops;
next reply other threads:[~2026-07-20 14:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-20 14:28 gregkh [this message]
2026-07-21 5:22 ` [PATCH 6.12.y] mm/damon/core: always put unsuccessfully committed target pids SJ Park
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026072031-shingle-buddy-1bbb@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=sj@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox