From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Jeff Layton <jlayton@kernel.org>, NeilBrown <neil@brown.name>,
Chuck Lever <chuck.lever@oracle.com>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.6.y 2/5] sunrpc: allocate a separate bvec array for socket sends
Date: Thu, 23 Jul 2026 21:25:12 -0400 [thread overview]
Message-ID: <20260724012515.3833219-2-sashal@kernel.org> (raw)
In-Reply-To: <20260724012515.3833219-1-sashal@kernel.org>
From: Jeff Layton <jlayton@kernel.org>
[ Upstream commit 6b3b697d65d46a0f640216a3f6c72856c159c567 ]
svc_tcp_sendmsg() calls xdr_buf_to_bvec() with the second slot of
rq_bvec as the start, but doesn't reduce the array length by one, which
could lead to an array overrun. Also, rq_bvec is always rq_maxpages in
length, which can be too short in some cases, since the TCP record
marker consumes a slot.
Fix both problems by adding a separate bvec array to the svc_sock that
is specifically for sending. For TCP, make this array one slot longer
than rq_maxpages, to account for the record marker. For UDP, only
allocate as large an array as we need since it's limited to 64k of
payload.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 18c1cc698861 ("SUNRPC: Return an error from xdr_buf_to_bvec() on overflow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/sunrpc/svcsock.h | 3 +++
net/sunrpc/svcsock.c | 37 +++++++++++++++++++++++++---------
2 files changed, 31 insertions(+), 9 deletions(-)
diff --git a/include/linux/sunrpc/svcsock.h b/include/linux/sunrpc/svcsock.h
index 7c78ec6356b928..9e6ecc3526e774 100644
--- a/include/linux/sunrpc/svcsock.h
+++ b/include/linux/sunrpc/svcsock.h
@@ -26,6 +26,9 @@ struct svc_sock {
void (*sk_odata)(struct sock *);
void (*sk_owspace)(struct sock *);
+ /* For sends (protected by xpt_mutex) */
+ struct bio_vec *sk_bvec;
+
/* private TCP part */
/* On-the-wire fragment header: */
__be32 sk_marker;
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 78b139d8c1f3b9..5a90e3564ebdf1 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -68,6 +68,17 @@
#define RPCDBG_FACILITY RPCDBG_SVCXPRT
+/*
+ * For UDP:
+ * 1 for header page
+ * enough pages for RPCSVC_MAXPAYLOAD_UDP
+ * 1 in case payload is not aligned
+ * 1 for tail page
+ */
+enum {
+ SUNRPC_MAX_UDP_SENDPAGES = 1 + RPCSVC_MAXPAYLOAD_UDP / PAGE_SIZE + 1 + 1
+};
+
/* To-do: to avoid tying up an nfsd thread while waiting for a
* handshake request, the request could instead be deferred.
*/
@@ -740,15 +751,14 @@ static int svc_udp_sendto(struct svc_rqst *rqstp)
if (svc_xprt_is_dead(xprt))
goto out_notconn;
- count = xdr_buf_to_bvec(rqstp->rq_bvec,
- ARRAY_SIZE(rqstp->rq_bvec), xdr);
+ count = xdr_buf_to_bvec(svsk->sk_bvec, SUNRPC_MAX_UDP_SENDPAGES, xdr);
- iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, rqstp->rq_bvec,
+ iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, svsk->sk_bvec,
count, rqstp->rq_res.len);
err = sock_sendmsg(svsk->sk_sock, &msg);
if (err == -ECONNREFUSED) {
/* ICMP error on earlier request. */
- iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, rqstp->rq_bvec,
+ iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, svsk->sk_bvec,
count, rqstp->rq_res.len);
err = sock_sendmsg(svsk->sk_sock, &msg);
}
@@ -1247,19 +1257,19 @@ static int svc_tcp_sendmsg(struct svc_sock *svsk, struct svc_rqst *rqstp,
*sentp = 0;
/* The stream record marker is copied into a temporary page
- * fragment buffer so that it can be included in rq_bvec.
+ * fragment buffer so that it can be included in sk_bvec.
*/
buf = page_frag_alloc(&svsk->sk_frag_cache, sizeof(marker),
GFP_KERNEL);
if (!buf)
return -ENOMEM;
memcpy(buf, &marker, sizeof(marker));
- bvec_set_virt(rqstp->rq_bvec, buf, sizeof(marker));
+ bvec_set_virt(svsk->sk_bvec, buf, sizeof(marker));
- count = xdr_buf_to_bvec(rqstp->rq_bvec + 1,
- ARRAY_SIZE(rqstp->rq_bvec) - 1, &rqstp->rq_res);
+ count = xdr_buf_to_bvec(svsk->sk_bvec + 1, RPCSVC_MAXPAGES,
+ &rqstp->rq_res);
- iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, rqstp->rq_bvec,
+ iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, svsk->sk_bvec,
1 + count, sizeof(marker) + rqstp->rq_res.len);
ret = sock_sendmsg(svsk->sk_sock, &msg);
page_frag_free(buf);
@@ -1422,6 +1432,13 @@ static struct svc_sock *svc_setup_socket(struct svc_serv *serv,
if (!svsk)
return ERR_PTR(-ENOMEM);
+ svsk->sk_bvec = kcalloc(RPCSVC_MAXPAGES + 1, sizeof(*svsk->sk_bvec),
+ GFP_KERNEL);
+ if (!svsk->sk_bvec) {
+ kfree(svsk);
+ return ERR_PTR(-ENOMEM);
+ }
+
inet = sock->sk;
if (pmap_register) {
@@ -1431,6 +1448,7 @@ static struct svc_sock *svc_setup_socket(struct svc_serv *serv,
inet->sk_protocol,
ntohs(inet_sk(inet)->inet_sport));
if (err < 0) {
+ kfree(svsk->sk_bvec);
kfree(svsk);
return ERR_PTR(err);
}
@@ -1650,5 +1668,6 @@ static void svc_sock_free(struct svc_xprt *xprt)
if (pfc->va)
__page_frag_cache_drain(virt_to_head_page(pfc->va),
pfc->pagecnt_bias);
+ kfree(svsk->sk_bvec);
kfree(svsk);
}
--
2.53.0
next prev parent reply other threads:[~2026-07-24 1:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-20 13:42 FAILED: patch "[PATCH] SUNRPC: Return an error from xdr_buf_to_bvec() on overflow" failed to apply to 6.6-stable tree gregkh
2026-07-24 1:25 ` [PATCH 6.6.y 1/5] NFSD: pass nfsd_file to nfsd_iter_read() Sasha Levin
2026-07-24 1:25 ` Sasha Levin [this message]
2026-07-24 1:25 ` [PATCH 6.6.y 3/5] SUNRPC: Add helpers to convert xdr_buf byte ranges to scatterlists Sasha Levin
2026-07-24 1:25 ` [PATCH 6.6.y 4/5] SUNRPC: Bound-check xdr_buf_to_bvec() stores before writing Sasha Levin
2026-07-24 1:25 ` [PATCH 6.6.y 5/5] SUNRPC: Return an error from xdr_buf_to_bvec() on overflow Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260724012515.3833219-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=chuck.lever@oracle.com \
--cc=jlayton@kernel.org \
--cc=neil@brown.name \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox