From: Oliver Hartkopp <socketcan@hartkopp.net>
To: stable@vger.kernel.org
Cc: Oliver Hartkopp <socketcan@hartkopp.net>,
Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH 8/8] can: bcm: track a single source interface for ANYDEV timeout/throttle ops
Date: Fri, 24 Jul 2026 10:42:04 +0200 [thread overview]
Message-ID: <20260724084204.13169-9-socketcan@hartkopp.net> (raw)
In-Reply-To: <2026072018-crouch-islamic-d0cb@gregkh>
commit 2f5976f54a04e9f18b25283036ac3136be453b17 upstream.
An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or
throttle timer has no defined semantics when matching frames arrive
from several interfaces: bcm_rx_handler() can run concurrently for
the same op on different CPUs, racing hrtimer_cancel()/
bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing
spurious RX_TIMEOUT notifications and last_frames corruption. The
same concurrency lets throttled multiplex frames from different
interfaces clobber the single rx_ifindex/rx_stamp fields shared by
the op.
Add op->if_detected to track the first interface that delivers a
matching frame while a timeout/throttle timer is configured, and
reject frames from any other interface for that op. The claim is
decided in bcm_rx_handler() before hrtimer_cancel() touches
op->timer, so a rejected frame can never disturb the claimed
interface's watchdog. RTR-mode ops are excluded via RX_RTR_FRAME,
independent of kt_ival1/kt_ival2, since those may briefly hold a
stale value from an earlier non-RTR configuration.
The claim is released in bcm_notify() on NETDEV_UNREGISTER and in
bcm_rx_setup() when SETTIMER reconfigures the timer values.
A (re-)claim is only possible on CAN devices in NETREG_REGISTERED
dev->reg_state to cover the release in bcm_notify() where reg_state
becomes NETREG_UNREGISTERING until synchronize_net().
Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/linux-can/20260709105031.1A39C1F000E9@smtp.kernel.org/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-11-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
---
net/can/bcm.c | 49 ++++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 44 insertions(+), 5 deletions(-)
diff --git a/net/can/bcm.c b/net/can/bcm.c
index ef9eafb..455eecb 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -116,6 +116,7 @@ struct bcm_op {
struct hrtimer timer, thrtimer;
ktime_t rx_stamp, kt_ival1, kt_ival2, kt_lastmsg;
int rx_ifindex;
+ int if_detected; /* first received ifindex in ANYDEV rx_op mode */
int cfsiz;
u32 count;
u32 nframes;
@@ -791,6 +792,33 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
return;
}
+ /* An ANYDEV op with an active RX timeout and/or throttle timer
+ * tracks a single source interface: claim the first interface that
+ * delivers a matching frame and reject frames from any other one,
+ * before hrtimer_cancel() below can touch op->timer - this avoids
+ * racing bcm_rx_timeout_handler() across concurrent interfaces.
+ * RX_RTR_FRAME ops are excluded, as kt_ival1/kt_ival2 may briefly
+ * hold a stale value from an earlier non-RTR configuration.
+ */
+ if (!op->ifindex) {
+ spin_lock_bh(&op->bcm_rx_update_lock);
+
+ if (!(op->flags & RX_RTR_FRAME) &&
+ (op->kt_ival1 || op->kt_ival2)) {
+ /* don't claim to vanishing interface */
+ if (!op->if_detected &&
+ skb->dev->reg_state == NETREG_REGISTERED)
+ op->if_detected = skb->dev->ifindex;
+
+ if (op->if_detected != skb->dev->ifindex) {
+ spin_unlock_bh(&op->bcm_rx_update_lock);
+ return;
+ }
+ }
+
+ spin_unlock_bh(&op->bcm_rx_update_lock);
+ }
+
/* disable timeout */
hrtimer_cancel(&op->timer);
@@ -825,10 +853,9 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
traffic_flags |= RX_OWN;
}
- /* save rx timestamp and originator for recvfrom() under lock.
- * For an op subscribed on all interfaces (ifindex == 0)
- * bcm_rx_handler() can run concurrently on different CPUs so
- * the CAN content and the meta data must be bundled correctly.
+ /* save rx timestamp and originator for recvfrom() under lock: an
+ * ANYDEV op without an active timer can still run concurrently on
+ * different CPUs, so content and meta data must be bundled here.
*/
op->rx_stamp = skb->tstamp;
op->rx_ifindex = skb->dev->ifindex;
@@ -1363,6 +1390,7 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1);
op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2);
op->kt_lastmsg = 0;
+ op->if_detected = 0; /* reclaim ifindex in ANYDEV mode */
}
spin_unlock_bh(&op->bcm_rx_update_lock);
@@ -1763,10 +1791,21 @@ static void bcm_notify(struct bcm_sock *bo, unsigned long msg,
lock_sock(sk);
/* rx_ops: remove device specific receive entries */
- list_for_each_entry(op, &bo->rx_ops, list)
+ list_for_each_entry(op, &bo->rx_ops, list) {
if (op->rx_reg_dev == dev)
bcm_rx_unreg(dev, op);
+ /* release an ANYDEV op's claim (see bcm_rx_handler())
+ * on this now confirmed-gone interface.
+ */
+ if (!op->ifindex) {
+ spin_lock_bh(&op->bcm_rx_update_lock);
+ if (op->if_detected == dev->ifindex)
+ op->if_detected = 0;
+ spin_unlock_bh(&op->bcm_rx_update_lock);
+ }
+ }
+
/* tx_ops: stop device specific cyclic transmissions on the
* vanishing ifindex. Cancelling the timer is enough to stop
* cyclic bcm_can_tx() calls as there is no re-arming.
--
2.43.0
next prev parent reply other threads:[~2026-07-24 8:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-20 15:14 FAILED: patch "[PATCH] can: bcm: track a single source interface for ANYDEV" failed to apply to 6.18-stable tree gregkh
2026-07-24 8:42 ` Oliver Hartkopp [this message]
-- strict thread matches above, loose matches on Subject: below --
2026-07-20 15:14 FAILED: patch "[PATCH] can: bcm: track a single source interface for ANYDEV" failed to apply to 6.12-stable tree gregkh
2026-07-24 8:40 ` [PATCH 8/8] can: bcm: track a single source interface for ANYDEV timeout/throttle ops Oliver Hartkopp
2026-07-20 15:14 FAILED: patch "[PATCH] can: bcm: track a single source interface for ANYDEV" failed to apply to 6.6-stable tree gregkh
2026-07-24 8:39 ` [PATCH 8/8] can: bcm: track a single source interface for ANYDEV timeout/throttle ops Oliver Hartkopp
2026-07-20 15:14 FAILED: patch "[PATCH] can: bcm: track a single source interface for ANYDEV" failed to apply to 6.1-stable tree gregkh
2026-07-24 8:38 ` [PATCH 8/8] can: bcm: track a single source interface for ANYDEV timeout/throttle ops Oliver Hartkopp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260724084204.13169-9-socketcan@hartkopp.net \
--to=socketcan@hartkopp.net \
--cc=mkl@pengutronix.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox