From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,zenghui.yu@linux.dev,stable@vger.kernel.org,sj@kernel.org,akpm@linux-foundation.org
Subject: [merged mm-stable] samples-damon-prcl-handle-damon_start-failure.patch removed from -mm tree
Date: Tue, 28 Jul 2026 21:15:10 -0700 [thread overview]
Message-ID: <20260729041510.9BF111F00A3D@smtp.kernel.org> (raw)
The quilt patch titled
Subject: samples/damon/prcl: handle damon_start() failure
has been removed from the -mm tree. Its filename was
samples-damon-prcl-handle-damon_start-failure.patch
This patch was dropped because it was merged into the mm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: SJ Park <sj@kernel.org>
Subject: samples/damon/prcl: handle damon_start() failure
Date: Sun, 28 Jun 2026 14:54:41 -0700
damon_sample_prcl_start() callers assume it will clean up resources when
it fails. And the function does the cleanup for context buildup failures.
However, it is not doing the cleanup for damon_start() failure. As a
result, when damon_start() fails, it leaks the memory for DAMON context.
Free the context in case of the failure to fix the issues.
Note that the issue can reliably be reproduced because the module calls
damon_start() in the exclusive mode. For example,
$ sudo damo start
$ echo $$ | sudo tee /sys/module/damon_sample_prcl/parameters/target_pid
$ echo Y | sudo tee /sys/module/damon_sample_prcl/parameters/enabled
$ sudo cat /proc/allocinfo | grep damon_new_ctx
Because the first command is running another DAMON instance, the third
command fails the damon_start() call because the new DAMON instance cannot
exclusively run. And without this fix, by repeating the third and the
fourth commands above, we can show the memory consumption is only
increasing due to the leaks. It requires the sudo permission though.
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260628215447.96166-3-sj@kernel.org
Link: https://lore.kernel.org/20260609145814.70163-1-sj@kernel.org [1]
Fixes: 2aca254620a8 ("samples/damon: introduce a skeleton of a smaple DAMON module for proactive reclamation")
Signed-off-by: SJ Park <sj@kernel.org>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Cc: <stable@vger.kernel.org> # 6.14.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
samples/damon/prcl.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/samples/damon/prcl.c~samples-damon-prcl-handle-damon_start-failure
+++ a/samples/damon/prcl.c
@@ -106,8 +106,10 @@ static int damon_sample_prcl_start(void)
damon_set_schemes(ctx, &scheme, 1);
err = damon_start(&ctx, 1, true);
- if (err)
+ if (err) {
+ damon_destroy_ctx(ctx);
return err;
+ }
repeat_call_control.data = ctx;
return damon_call(ctx, &repeat_call_control);
_
Patches currently in -mm which might be from sj@kernel.org are
mm-damon-adjust-isolated-pages-stat-for-damos_migrate_hotcold.patch
docs-mm-damon-design-update-for-damos_quota_node_eligible_mem_bp.patch
docs-abi-damon-document-probe-files.patch
mm-damon-tests-core-kunit-test-damon_rand.patch
selftests-damon-sysfssh-test-multiple-probe-dirs-creation.patch
selftests-damon-sysfssh-test-coreops_filters-directories.patch
selftests-damon-sysfssh-test-dests-dir.patch
selftests-damon-sysfssh-test-all-files-in-quota-goal-dir.patch
mm-damon-core-reduce-range-setup-in-damon_commit_target_regions.patch
mm-damon-sysfs-split-probe-setup-function-out.patch
mm-damon-sysfs-split-out-filters-setup-function.patch
mm-damon-sysfs-fix-typos-in-probe_addrm_dirs-s-attr-probe.patch
mm-damon-core-introduce-damon_nr_accesses_mvsum.patch
mm-damon-tests-core-kunit-test-damon_mvsum.patch
mm-damon-core-always-update-last_nr_accesses-for-intervals-change.patch
mm-damon-core-handle-unreset-nr_accesses-in-damon_nr_accesses_mvsum.patch
mm-damon-core-use-damon_nr_accesses_mvsum-in-__damos_valid_target.patch
mm-damon-core-use-damon_nr_accesses_mvsum-for-damos-region-tracing.patch
mm-damon-sysfs-schemes-use-damon_nr_accesses_mvsum-for-damo-regions.patch
mm-damon-core-remove-damon_warn_fix_nr_accesses_corruption.patch
mm-damon-core-remove-damon_verify_reset_aggregated.patch
mm-damon-core-remove-damon_verify_merge_regions_of.patch
mm-damon-tests-core-kunit-remove-nr_accesses_bp-setup-and-tests.patch
selftests-damon-drgn_dump_damon_status-do-not-dump-nr_accesses_bp.patch
mm-damon-core-remove-nr_accesses_bp-setups-and-updates.patch
mm-damon-core-remove-attrs-param-from-damon_update_region_access_rate.patch
mm-damon-paddr-remove-attrs-param-from-__damon_pa_check_access.patch
mm-damon-vaddr-remove-attrs-param-from-__damon_va_check_access.patch
mm-damon-core-remove-damon_moving_sum-and-its-unit-test.patch
mm-damon-core-remove-damon_region-nr_accesses_bp.patch
mm-damon-add-damon_region-last_probe_hits.patch
mm-damon-core-introduce-damon_probe_hits_mvsum.patch
mm-damon-sysfs-schemes-set-probe-hits-as-pseudo-moving-sums.patch
mm-damon-core-safely-validate-src-on-damon_commit_ctx.patch
mm-damon-core-do-parameter-testing-commit-on-damon_start.patch
mm-damon-sysfs-remove-duplicated-commit-input-validity-check.patch
mm-damon-reclaim-remove-duplicated-min_region_sz-power-of-2-check.patch
mm-damon-lru_sort-remove-duplicated-min_region_sz-power_of_2-check.patch
mm-damon-document-region-size-validation-in-damon_set_regions.patch
mm-damon-core-remove-start-end-check-in-damon_set_region_system_rams.patch
mm-damon-sysfs-remove-region-size-validation.patch
mm-damon-core-stop-ctxs-in-damon_start-before-returning-an-error.patch
samples-damon-mtier-do-not-stop-first-context-for-damon_start-failure.patch
mm-damon-core-make-damon_stop-never-fails.patch
mm-damon-sysfs-ignore-damon_stop-return-value.patch
mm-damon-reclaaim-ignore-damon_stop-return-value.patch
mm-damon-lru_sort-ignore-damon_stop-return-value.patch
mm-damon-core-change-damon_stop-return-type-to-void.patch
samples-damon-mtier-stop-all-contexts-with-single-damon_stop-call.patch
mm-damon-core-wait-ctx-stop-in-damon_call-before-reruning-an-error.patch
samples-damon-wsse-do-not-stop-ctx-for-damon_call-failure.patch
samples-damon-prcl-do-not-stop-damon-for-damon_call-failure.patch
mm-damon-core-remove-comment-and-test-for-nr_to_bp-divide-by-zero.patch
mm-damon-core-s-damon_max_nr_accesses-damon_nr_samples_per_aggr.patch
mm-damon-core-s-accesses_bp_to_nr_accesses-sample_bp_to_count.patch
mm-damon-core-s-nr_accesses_to_accesses_bp-sample_count_to_bp.patch
mm-damon-core-s-nr_accesses_for_new_attrs-nr_samples_for_new_attrs.patch
mm-damon-core-update-probe-hits-for-new-parameter-commit.patch
mm-damon-core-handle-unreset-probe_hits-in-probe_hits_mvsum.patch
mm-damon-core-introduce-damon_probe-weight.patch
mm-damon-core-ask-apply_probes-ops-callback-to-set-sampling-address.patch
mm-damon-paddr-set-samples-in-apply_probes-if-requested.patch
mm-damon-core-ask-apply_probe-to-return-max-probe-hits-weighted-sum.patch
mm-damon-core-implement-damon_probe_hits_wsum.patch
mm-damon-paddr-respect-return_max_wsum.patch
mm-damon-core-use-abs_diff-instead-of-abs.patch
mm-damon-core-extend-merge-function-to-work-with-probe-hits.patch
mm-damon-core-disallow-probe_hits-overflow-on-attrs-only-monitoring.patch
mm-damon-core-validate-params-for-probe-hits-weighted-sum-overflow.patch
mm-damon-core-disable-access-monitoring-when-probe-weights-are-set.patch
mm-damon-core-set-samples-in-apply_probes-if-probe-weights-are-set.patch
mm-damon-core-s-max_nr_accesses-max_merge_score-in-kdamond_fn.patch
mm-damon-core-get-merge-threshold-from-probe-hits-when-weights-are-set.patch
mm-damon-core-implement-damon_has_probe_weight.patch
mm-damon-sysfs-implement-probe-weight-file.patch
docs-mm-damon-design-document-attrs-only-monitoring.patch
docs-admin-guide-mm-damon-usage-document-weight-sysfs-file.patch
docs-abi-damon-document-probe-weight-file.patch
mm-damon-core-skip-aging-from-repeated-aggressive-merging.patch
mm-damon-core-hide-private-damon_region-fields.patch
mm-damon-core-hide-private-damon_target-fields.patch
mm-damon-core-hide-private-damos_quota_goal-fields.patch
mm-damon-core-hide-private-damos_quota-fields.patch
mm-damon-core-hide-private-damos_filter-fields.patch
mm-damon-core-hide-private-damos-fields.patch
mm-damon-core-hide-private-damon_filter-fields.patch
mm-damon-core-hide-private-damon_probe-fields.patch
mm-damon-sysfs-do-not-directly-access-damon_ctx-ops.patch
mm-damon-core-hide-core-private-damon_ctx-fields.patch
mm-damon-core-avoid-infinite-kdamond_merge_regions-internal-loop.patch
mm-damon-tests-core-kunit-catch-test-failure-in-test_merge_regions_of.patch
mm-damon-vaddr-drop-last-same-folio-access-check-optimization.patch
mm-damon-paddr-drop-last-same-folio-access-check-reuse-optimization.patch
mm-damon-sysfs-read-addr_unit-only-once-in-damon_sysfs_apply_inputs.patch
mm-damon-sysfs-read-ops_id-only-once-in-damon_sysfs_apply_inputs.patch
mm-damon-core-initialize-damos-last_applied.patch
mm-damon-core-kunit-check-region-count-before-testing-in-split_at.patch
mm-damon-vaddr-kunit-check-region-count-in-three_regions-test.patch
mm-damon-core-kunit-handle-region-split-failure-in-filter_out.patch
mm-damon-core-kunit-skip-wrong-dest-walk-in-commit_dests_for.patch
mm-damon-core-kunit-skip-wrong-quota-goal-walk-in-commit_quota_goals.patch
mm-damon-core-kunit-skip-wrong-region-walk-in-commit_target_regions.patch
mm-damon-ops-common-use-nr_accesses-moving-sum-for-quota-score.patch
mm-damon-core-handle-region-split-failure-in-apply_min_nr_regions.patch
reply other threads:[~2026-07-29 4:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260729041510.9BF111F00A3D@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=mm-commits@vger.kernel.org \
--cc=sj@kernel.org \
--cc=stable@vger.kernel.org \
--cc=zenghui.yu@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox