From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,zenghui.yu@linux.dev,stable@vger.kernel.org,sj@kernel.org,akpm@linux-foundation.org
Subject: [merged mm-stable] samples-damon-mtier-handle-damon_start-failure.patch removed from -mm tree
Date: Tue, 28 Jul 2026 21:15:11 -0700 [thread overview]
Message-ID: <20260729041511.C2C241F00A3A@smtp.kernel.org> (raw)
The quilt patch titled
Subject: samples/damon/mtier: handle damon_start() failure
has been removed from the -mm tree. Its filename was
samples-damon-mtier-handle-damon_start-failure.patch
This patch was dropped because it was merged into the mm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: SJ Park <sj@kernel.org>
Subject: samples/damon/mtier: handle damon_start() failure
Date: Sun, 28 Jun 2026 14:54:42 -0700
damon_sample_mtier_start() callers assume it will clean up resources when
it fails. And the function does the cleanup for context buildup failures.
However, it is not doing the cleanup for damon_start() failure.
As a result, when damon_start() fails, it could leak the memory for DAMON
context. Also, if damon_start() fails for only the second context, the
first context will indefinitely run, and avoid starting other DAMON
contexts since it is running in the exclusive mode. Stop possibly started
DAMON context and free the contexts in case of the failure to fix the
issues.
Note that the issue can reliably be reproduced because the module calls
damon_start() in the exclusive mode. For example,
$ sudo damo start
$ echo Y | sudo tee /sys/module/damon_sample_mtier/parameters/enabled
$ sudo cat /proc/allocinfo | grep damon_new_ctx
Because the first command is running another DAMON instance, the second
command fails the damon_start() call because the new DAMON instance cannot
exclusively run. And without this fix, by repeating the second and the
third commands above, we can show the memory consumption is only
increasing due to the leaks. It requires the sudo permission though.
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260628215447.96166-4-sj@kernel.org
Link: https://lore.kernel.org/20260608112455.274231F00893@smtp.kernel.org [1]
Fixes: 82a08bde3cf7 ("samples/damon: implement a DAMON module for memory tiering")
Signed-off-by: SJ Park <sj@kernel.org>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Cc: <stable@vger.kernel.org> # 6.16.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
samples/damon/mtier.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/samples/damon/mtier.c~samples-damon-mtier-handle-damon_start-failure
+++ a/samples/damon/mtier.c
@@ -177,6 +177,7 @@ free_out:
static int damon_sample_mtier_start(void)
{
struct damon_ctx *ctx;
+ int err;
ctx = damon_sample_mtier_build_ctx(true);
if (!ctx)
@@ -188,7 +189,15 @@ static int damon_sample_mtier_start(void
return -ENOMEM;
}
ctxs[1] = ctx;
- return damon_start(ctxs, 2, true);
+ err = damon_start(ctxs, 2, true);
+ if (!err)
+ return 0;
+
+ if (damon_is_running(ctxs[0]))
+ damon_stop(ctxs, 1);
+ damon_destroy_ctx(ctxs[0]);
+ damon_destroy_ctx(ctxs[1]);
+ return err;
}
static void damon_sample_mtier_stop(void)
_
Patches currently in -mm which might be from sj@kernel.org are
mm-damon-adjust-isolated-pages-stat-for-damos_migrate_hotcold.patch
docs-mm-damon-design-update-for-damos_quota_node_eligible_mem_bp.patch
docs-abi-damon-document-probe-files.patch
mm-damon-tests-core-kunit-test-damon_rand.patch
selftests-damon-sysfssh-test-multiple-probe-dirs-creation.patch
selftests-damon-sysfssh-test-coreops_filters-directories.patch
selftests-damon-sysfssh-test-dests-dir.patch
selftests-damon-sysfssh-test-all-files-in-quota-goal-dir.patch
mm-damon-core-reduce-range-setup-in-damon_commit_target_regions.patch
mm-damon-sysfs-split-probe-setup-function-out.patch
mm-damon-sysfs-split-out-filters-setup-function.patch
mm-damon-sysfs-fix-typos-in-probe_addrm_dirs-s-attr-probe.patch
mm-damon-core-introduce-damon_nr_accesses_mvsum.patch
mm-damon-tests-core-kunit-test-damon_mvsum.patch
mm-damon-core-always-update-last_nr_accesses-for-intervals-change.patch
mm-damon-core-handle-unreset-nr_accesses-in-damon_nr_accesses_mvsum.patch
mm-damon-core-use-damon_nr_accesses_mvsum-in-__damos_valid_target.patch
mm-damon-core-use-damon_nr_accesses_mvsum-for-damos-region-tracing.patch
mm-damon-sysfs-schemes-use-damon_nr_accesses_mvsum-for-damo-regions.patch
mm-damon-core-remove-damon_warn_fix_nr_accesses_corruption.patch
mm-damon-core-remove-damon_verify_reset_aggregated.patch
mm-damon-core-remove-damon_verify_merge_regions_of.patch
mm-damon-tests-core-kunit-remove-nr_accesses_bp-setup-and-tests.patch
selftests-damon-drgn_dump_damon_status-do-not-dump-nr_accesses_bp.patch
mm-damon-core-remove-nr_accesses_bp-setups-and-updates.patch
mm-damon-core-remove-attrs-param-from-damon_update_region_access_rate.patch
mm-damon-paddr-remove-attrs-param-from-__damon_pa_check_access.patch
mm-damon-vaddr-remove-attrs-param-from-__damon_va_check_access.patch
mm-damon-core-remove-damon_moving_sum-and-its-unit-test.patch
mm-damon-core-remove-damon_region-nr_accesses_bp.patch
mm-damon-add-damon_region-last_probe_hits.patch
mm-damon-core-introduce-damon_probe_hits_mvsum.patch
mm-damon-sysfs-schemes-set-probe-hits-as-pseudo-moving-sums.patch
mm-damon-core-safely-validate-src-on-damon_commit_ctx.patch
mm-damon-core-do-parameter-testing-commit-on-damon_start.patch
mm-damon-sysfs-remove-duplicated-commit-input-validity-check.patch
mm-damon-reclaim-remove-duplicated-min_region_sz-power-of-2-check.patch
mm-damon-lru_sort-remove-duplicated-min_region_sz-power_of_2-check.patch
mm-damon-document-region-size-validation-in-damon_set_regions.patch
mm-damon-core-remove-start-end-check-in-damon_set_region_system_rams.patch
mm-damon-sysfs-remove-region-size-validation.patch
mm-damon-core-stop-ctxs-in-damon_start-before-returning-an-error.patch
samples-damon-mtier-do-not-stop-first-context-for-damon_start-failure.patch
mm-damon-core-make-damon_stop-never-fails.patch
mm-damon-sysfs-ignore-damon_stop-return-value.patch
mm-damon-reclaaim-ignore-damon_stop-return-value.patch
mm-damon-lru_sort-ignore-damon_stop-return-value.patch
mm-damon-core-change-damon_stop-return-type-to-void.patch
samples-damon-mtier-stop-all-contexts-with-single-damon_stop-call.patch
mm-damon-core-wait-ctx-stop-in-damon_call-before-reruning-an-error.patch
samples-damon-wsse-do-not-stop-ctx-for-damon_call-failure.patch
samples-damon-prcl-do-not-stop-damon-for-damon_call-failure.patch
mm-damon-core-remove-comment-and-test-for-nr_to_bp-divide-by-zero.patch
mm-damon-core-s-damon_max_nr_accesses-damon_nr_samples_per_aggr.patch
mm-damon-core-s-accesses_bp_to_nr_accesses-sample_bp_to_count.patch
mm-damon-core-s-nr_accesses_to_accesses_bp-sample_count_to_bp.patch
mm-damon-core-s-nr_accesses_for_new_attrs-nr_samples_for_new_attrs.patch
mm-damon-core-update-probe-hits-for-new-parameter-commit.patch
mm-damon-core-handle-unreset-probe_hits-in-probe_hits_mvsum.patch
mm-damon-core-introduce-damon_probe-weight.patch
mm-damon-core-ask-apply_probes-ops-callback-to-set-sampling-address.patch
mm-damon-paddr-set-samples-in-apply_probes-if-requested.patch
mm-damon-core-ask-apply_probe-to-return-max-probe-hits-weighted-sum.patch
mm-damon-core-implement-damon_probe_hits_wsum.patch
mm-damon-paddr-respect-return_max_wsum.patch
mm-damon-core-use-abs_diff-instead-of-abs.patch
mm-damon-core-extend-merge-function-to-work-with-probe-hits.patch
mm-damon-core-disallow-probe_hits-overflow-on-attrs-only-monitoring.patch
mm-damon-core-validate-params-for-probe-hits-weighted-sum-overflow.patch
mm-damon-core-disable-access-monitoring-when-probe-weights-are-set.patch
mm-damon-core-set-samples-in-apply_probes-if-probe-weights-are-set.patch
mm-damon-core-s-max_nr_accesses-max_merge_score-in-kdamond_fn.patch
mm-damon-core-get-merge-threshold-from-probe-hits-when-weights-are-set.patch
mm-damon-core-implement-damon_has_probe_weight.patch
mm-damon-sysfs-implement-probe-weight-file.patch
docs-mm-damon-design-document-attrs-only-monitoring.patch
docs-admin-guide-mm-damon-usage-document-weight-sysfs-file.patch
docs-abi-damon-document-probe-weight-file.patch
mm-damon-core-skip-aging-from-repeated-aggressive-merging.patch
mm-damon-core-hide-private-damon_region-fields.patch
mm-damon-core-hide-private-damon_target-fields.patch
mm-damon-core-hide-private-damos_quota_goal-fields.patch
mm-damon-core-hide-private-damos_quota-fields.patch
mm-damon-core-hide-private-damos_filter-fields.patch
mm-damon-core-hide-private-damos-fields.patch
mm-damon-core-hide-private-damon_filter-fields.patch
mm-damon-core-hide-private-damon_probe-fields.patch
mm-damon-sysfs-do-not-directly-access-damon_ctx-ops.patch
mm-damon-core-hide-core-private-damon_ctx-fields.patch
mm-damon-core-avoid-infinite-kdamond_merge_regions-internal-loop.patch
mm-damon-tests-core-kunit-catch-test-failure-in-test_merge_regions_of.patch
mm-damon-vaddr-drop-last-same-folio-access-check-optimization.patch
mm-damon-paddr-drop-last-same-folio-access-check-reuse-optimization.patch
mm-damon-sysfs-read-addr_unit-only-once-in-damon_sysfs_apply_inputs.patch
mm-damon-sysfs-read-ops_id-only-once-in-damon_sysfs_apply_inputs.patch
mm-damon-core-initialize-damos-last_applied.patch
mm-damon-core-kunit-check-region-count-before-testing-in-split_at.patch
mm-damon-vaddr-kunit-check-region-count-in-three_regions-test.patch
mm-damon-core-kunit-handle-region-split-failure-in-filter_out.patch
mm-damon-core-kunit-skip-wrong-dest-walk-in-commit_dests_for.patch
mm-damon-core-kunit-skip-wrong-quota-goal-walk-in-commit_quota_goals.patch
mm-damon-core-kunit-skip-wrong-region-walk-in-commit_target_regions.patch
mm-damon-ops-common-use-nr_accesses-moving-sum-for-quota-score.patch
mm-damon-core-handle-region-split-failure-in-apply_min_nr_regions.patch
reply other threads:[~2026-07-29 4:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260729041511.C2C241F00A3A@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=mm-commits@vger.kernel.org \
--cc=sj@kernel.org \
--cc=stable@vger.kernel.org \
--cc=zenghui.yu@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox