From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Guoniu Zhou <guoniu.zhou@oss.nxp.com>,
Frank Li <Frank.Li@nxp.com>, Peng Fan <peng.fan@nxp.com>,
Ulf Hansson <ulfh@kernel.org>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.18.y 2/2] pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI
Date: Wed, 29 Jul 2026 14:02:08 -0400 [thread overview]
Message-ID: <20260729180208.3683189-2-sashal@kernel.org> (raw)
In-Reply-To: <20260729180208.3683189-1-sashal@kernel.org>
From: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
[ Upstream commit 99611233f8cda833169fa6487d5dacdf189e5cb0 ]
The MIPI DSI and CSI domains share control bits for clock and reset, which
can lead to incorrect behavior if one domain disables the shared resource
while the other is still active.
To fix the issue, introduce a shared MIPI PHY power domain to own the
common resources and make DSI and CSI its subdomains. This ensures the
shared bits are properly managed and not disabled while still in use.
Fixes: e9aa77d413c9 ("soc: imx: add i.MX93 media blk ctrl driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pmdomain/imx/imx93-blk-ctrl.c | 60 ++++++++++++++++++++++++++-
1 file changed, 58 insertions(+), 2 deletions(-)
diff --git a/drivers/pmdomain/imx/imx93-blk-ctrl.c b/drivers/pmdomain/imx/imx93-blk-ctrl.c
index 325711323ba4f6..28688ca46517aa 100644
--- a/drivers/pmdomain/imx/imx93-blk-ctrl.c
+++ b/drivers/pmdomain/imx/imx93-blk-ctrl.c
@@ -47,6 +47,8 @@
#define PRIO(X) (X)
+#define BLK_CTRL_NO_PARENT UINT_MAX
+
struct imx93_blk_ctrl_domain;
struct imx93_blk_ctrl {
@@ -67,12 +69,18 @@ struct imx93_blk_ctrl_qos {
u32 cfg_prio;
};
+struct imx93_blk_ctrl_subdomain_link {
+ struct generic_pm_domain *parent;
+ struct generic_pm_domain *subdomain;
+};
+
struct imx93_blk_ctrl_domain_data {
const char *name;
const char * const *clk_names;
int num_clks;
u32 rst_mask;
u32 clk_mask;
+ u32 parent;
int num_qos;
struct imx93_blk_ctrl_qos qos[DOMAIN_MAX_QOS];
};
@@ -202,6 +210,13 @@ static void imx93_release_pm_genpd(void *data)
pm_genpd_remove(genpd);
}
+static void imx93_release_subdomain(void *data)
+{
+ struct imx93_blk_ctrl_subdomain_link *link = data;
+
+ pm_genpd_remove_subdomain(link->parent, link->subdomain);
+}
+
static struct lock_class_key blk_ctrl_genpd_lock_class;
static int imx93_blk_ctrl_probe(struct platform_device *pdev)
@@ -303,6 +318,34 @@ static int imx93_blk_ctrl_probe(struct platform_device *pdev)
bc->onecell_data.domains[i] = &domain->genpd;
}
+ for (i = 0; i < bc_data->num_domains; i++) {
+ struct imx93_blk_ctrl_domain *domain = &bc->domains[i];
+ const struct imx93_blk_ctrl_domain_data *data = domain->data;
+ struct imx93_blk_ctrl_subdomain_link *link;
+
+ if (bc_data->skip_mask & BIT(i) ||
+ data->parent == BLK_CTRL_NO_PARENT)
+ continue;
+
+ link = devm_kzalloc(dev, sizeof(*link), GFP_KERNEL);
+ if (!link)
+ return -ENOMEM;
+
+ link->parent = &bc->domains[data->parent].genpd;
+ link->subdomain = &domain->genpd;
+
+ ret = pm_genpd_add_subdomain(&bc->domains[data->parent].genpd,
+ &domain->genpd);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to add subdomain %s\n",
+ domain->genpd.name);
+
+ ret = devm_add_action_or_reset(dev, imx93_release_subdomain, link);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to add subdomain release callback\n");
+ }
+
ret = devm_pm_runtime_enable(dev);
if (ret)
return dev_err_probe(dev, ret, "failed to enable pm-runtime\n");
@@ -323,8 +366,9 @@ static const struct imx93_blk_ctrl_domain_data imx93_media_blk_ctl_domain_data[]
.name = "mediablk-mipi-dsi",
.clk_names = (const char *[]){ "dsi" },
.num_clks = 1,
- .rst_mask = BIT(11) | BIT(12),
- .clk_mask = BIT(11) | BIT(12),
+ .rst_mask = BIT(11),
+ .clk_mask = BIT(11),
+ .parent = IMX93_MEDIABLK_PD_MIPI_PHY,
},
[IMX93_MEDIABLK_PD_MIPI_CSI] = {
.name = "mediablk-mipi-csi",
@@ -332,6 +376,7 @@ static const struct imx93_blk_ctrl_domain_data imx93_media_blk_ctl_domain_data[]
.num_clks = 2,
.rst_mask = BIT(9) | BIT(10),
.clk_mask = BIT(9) | BIT(10),
+ .parent = IMX93_MEDIABLK_PD_MIPI_PHY,
},
[IMX93_MEDIABLK_PD_PXP] = {
.name = "mediablk-pxp",
@@ -339,6 +384,7 @@ static const struct imx93_blk_ctrl_domain_data imx93_media_blk_ctl_domain_data[]
.num_clks = 1,
.rst_mask = BIT(7) | BIT(8),
.clk_mask = BIT(7) | BIT(8),
+ .parent = BLK_CTRL_NO_PARENT,
.num_qos = 2,
.qos = {
{
@@ -360,6 +406,7 @@ static const struct imx93_blk_ctrl_domain_data imx93_media_blk_ctl_domain_data[]
.num_clks = 2,
.rst_mask = BIT(4) | BIT(5) | BIT(6),
.clk_mask = BIT(4) | BIT(5) | BIT(6),
+ .parent = BLK_CTRL_NO_PARENT,
.num_qos = 1,
.qos = {
{
@@ -376,6 +423,7 @@ static const struct imx93_blk_ctrl_domain_data imx93_media_blk_ctl_domain_data[]
.num_clks = 1,
.rst_mask = BIT(2) | BIT(3),
.clk_mask = BIT(2) | BIT(3),
+ .parent = BLK_CTRL_NO_PARENT,
.num_qos = 4,
.qos = {
{
@@ -401,6 +449,14 @@ static const struct imx93_blk_ctrl_domain_data imx93_media_blk_ctl_domain_data[]
}
}
},
+ [IMX93_MEDIABLK_PD_MIPI_PHY] = {
+ .name = "mediablk-mipi-phy",
+ .clk_names = NULL,
+ .num_clks = 0,
+ .rst_mask = BIT(12),
+ .clk_mask = BIT(12),
+ .parent = BLK_CTRL_NO_PARENT,
+ },
};
static const struct regmap_range imx93_media_blk_ctl_yes_ranges[] = {
--
2.53.0
prev parent reply other threads:[~2026-07-29 18:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-21 9:22 FAILED: patch "[PATCH] pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for" failed to apply to 6.18-stable tree gregkh
2026-07-29 18:02 ` [PATCH 6.18.y 1/2] pmdomain: imx93-blk-ctrl: convert to devm_* only Sasha Levin
2026-07-29 18:02 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260729180208.3683189-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=guoniu.zhou@oss.nxp.com \
--cc=peng.fan@nxp.com \
--cc=stable@vger.kernel.org \
--cc=ulfh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox