From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Chancel Liu <chancel.liu@nxp.com>,
Shengjiu Wang <shengjiu.wang@gmail.com>,
Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.6.y] ASoC: fsl_sai: Fix spurious BCLK on resume by clearing BYP
Date: Fri, 7 Aug 2026 22:52:16 -0400 [thread overview]
Message-ID: <20260808025216.4027230-1-sashal@kernel.org> (raw)
In-Reply-To: <2026072959-timid-mortify-1131@gregkh>
From: Chancel Liu <chancel.liu@nxp.com>
[ Upstream commit d091132889c1378dd0944a72f86eae3e4da1e4fa ]
When the BCLK divider ratio is 1:1, fsl_sai_set_bclk() enables bypass
mode by setting BYP, but never clears the bit. The BYP=1 value remains
in the regcache, and is restored by regcache_sync() on the next runtime
resume.
Since BYP=1 combined with BCD=1 immediately outputs the ungated MCLK
as BCLK without waiting for BCE/TE/RE to be enabled, the clock is
driven prematurely before the stream is fully configured, causing
noise on some codecs.
Fix this by clearing BYP and BCI in fsl_sai_hw_free() taking into
account sync mode and the opposite stream's state, so that the regcache
holds BYP=0 before runtime suspend and regcache_sync() on resume will
not restore bypass mode prematurely.
Fixes: a50b7926d015 ("ASoC: fsl_sai: implement 1:1 bclk:mclk ratio support")
Cc: stable@vger.kernel.org
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20260710070835.3749817-1-chancel.liu@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/fsl/fsl_sai.c | 29 +++++++++++++++++++++++++----
1 file changed, 25 insertions(+), 4 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 5a43658111b60..61cc57b8467fe 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -716,6 +716,8 @@ static int fsl_sai_hw_free(struct snd_pcm_substream *substream,
struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
unsigned int ofs = sai->soc_data->reg_offset;
+ int adir = tx ? RX : TX;
+ int dir = tx ? TX : RX;
/* Clear xMR to avoid channel swap with mclk_with_tere enabled case */
regmap_write(sai->regmap, FSL_SAI_xMR(tx), 0);
@@ -723,10 +725,29 @@ static int fsl_sai_hw_free(struct snd_pcm_substream *substream,
regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, ofs),
FSL_SAI_CR3_TRCE_MASK, 0);
- if (!sai->is_consumer_mode &&
- sai->mclk_streams & BIT(substream->stream)) {
- clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[tx]]);
- sai->mclk_streams &= ~BIT(substream->stream);
+ if (!sai->is_consumer_mode) {
+ bool adir_active = !!(sai->mclk_streams & BIT(!substream->stream));
+ /*
+ * If opposite stream provides clocks for synchronous mode and
+ * it is inactive, Clear BYP and BCI
+ */
+ if (fsl_sai_dir_is_synced(sai, adir) && !adir_active)
+ regmap_update_bits(sai->regmap, FSL_SAI_xCR2(!tx, ofs),
+ FSL_SAI_CR2_BCI | FSL_SAI_CR2_BYP, 0);
+ /*
+ * Clear BYP and BCI of current stream if either of:
+ * 1. current stream doesn't provide clocks for synchronous mode
+ * 2. current stream provides clocks for synchronous mode but no
+ * more stream is active.
+ */
+ if (!fsl_sai_dir_is_synced(sai, dir) || !adir_active)
+ regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
+ FSL_SAI_CR2_BCI | FSL_SAI_CR2_BYP, 0);
+
+ if (sai->mclk_streams & BIT(substream->stream)) {
+ clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[tx]]);
+ sai->mclk_streams &= ~BIT(substream->stream);
+ }
}
return 0;
--
2.53.0
prev parent reply other threads:[~2026-08-08 2:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-29 13:48 FAILED: patch "[PATCH] ASoC: fsl_sai: Fix spurious BCLK on resume by clearing BYP" failed to apply to 6.6-stable tree gregkh
2026-08-08 2:52 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260808025216.4027230-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=broonie@kernel.org \
--cc=chancel.liu@nxp.com \
--cc=shengjiu.wang@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox