From: <gregkh@linuxfoundation.org>
To: peter.ujfalusi@linux.intel.com,broonie@kernel.org,kai.vehmanen@linux.intel.com,liam.r.girdwood@intel.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] ASoC: SOF: ipc4-topology: Refresh copier IPC payload before" failed to apply to 7.1-stable tree
Date: Thu, 20 Aug 2026 13:06:16 +0200 [thread overview]
Message-ID: <2026082016-frisk-riches-3e59@gregkh> (raw)
The patch below does not apply to the 7.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-7.1.y
git checkout FETCH_HEAD
git cherry-pick -x 0c0e418dbcf0582bf80d8dbfd9b306607c065992
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026082016-frisk-riches-3e59@gregkh' --subject-prefix 'PATCH 7.1.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 0c0e418dbcf0582bf80d8dbfd9b306607c065992 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Date: Thu, 30 Jul 2026 08:48:22 +0300
Subject: [PATCH] ASoC: SOF: ipc4-topology: Refresh copier IPC payload before
widget setup
The ipc_config_data buffer for copier widgets is built once during
ipc_prepare (called from sof_pcm_setup_connected_widgets) and cached
for reuse. For host copiers this buffer contains the copier_data with
gtw_cfg.node_id (host DMA ID). For DAI copiers it additionally includes
a dma_config_tlv trailer with stream_id and dma_channel_id for HDA link
DMA.
On suspend/resume, both host and link DMA streams are released and
re-allocated with potentially different stream tags. The underlying
copier_data and dma_config_tlv structures are correctly updated by
host_config and sdw_hda_dai_hw_params respectively. However, since the
widget list (spcm->stream[].list) persists across suspend,
sof_pcm_hw_params skips sof_pcm_setup_connected_widgets and ipc_prepare
never runs again to rebuild ipc_config_data. The stale cached payload
is then sent to firmware with boot-time DMA channel assignments, causing
DMA channel conflicts that lead to firmware errors and crashes.
Fix this by refreshing copier_data and dma_config_tlv portions of
ipc_config_data in sof_ipc4_widget_setup right before the IPC message
is sent. This ensures the payload always reflects the current DMA state
regardless of whether ipc_prepare ran.
For DAI copiers, the gtw_cfg.config_length in copier_data is temporarily
inflated to include the TLV size (matching the ipc_config_data layout)
before copying, then restored, mirroring what
sof_ipc4_prepare_copier_module does when first building the buffer.
Fixes: e9c6b118de1a ("ASoC: SOF: make dma_config_tlv be an array")
Cc: stable@vger.kernel.org
Link: https://github.com/thesofproject/sof/issues/10700
Link: https://github.com/thesofproject/sof/issues/10955
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260730054822.5913-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c
index 95ad5266b0c6..6fdfb667cce8 100644
--- a/sound/soc/sof/ipc4-topology.c
+++ b/sound/soc/sof/ipc4-topology.c
@@ -3204,6 +3204,15 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget
ipc_size = ipc4_copier->ipc_config_size;
ipc_data = ipc4_copier->ipc_config_data;
+ /*
+ * Refresh copier_data in ipc_config_data for host copiers.
+ * The node_id may have been updated by host_config after
+ * ipc_prepare, e.g. when host stream tags change after a
+ * suspend/resume cycle.
+ */
+ if (swidget->id != snd_soc_dapm_buffer)
+ memcpy(ipc_data, &ipc4_copier->data, sizeof(ipc4_copier->data));
+
msg = &ipc4_copier->msg;
break;
}
@@ -3212,6 +3221,9 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget
{
struct snd_sof_dai *dai = swidget->private;
struct sof_ipc4_copier *ipc4_copier = dai->private;
+ struct sof_ipc4_copier_data *copier_data;
+ u32 gtw_cfg_config_length;
+ u32 tlv_size;
pipeline = pipe_widget->private;
if (pipeline->use_chain_dma)
@@ -3220,6 +3232,27 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget
ipc_size = ipc4_copier->ipc_config_size;
ipc_data = ipc4_copier->ipc_config_data;
+ /*
+ * Refresh copier_data and dma_config_tlv in ipc_config_data.
+ * These may have been updated after ipc_prepare, e.g. when
+ * link DMA stream tags change after a suspend/resume cycle.
+ *
+ * copier_data->gtw_cfg.config_length does not include the
+ * TLV size (it was restored after sof_ipc4_prepare_copier_module),
+ * so temporarily inflate it to match the ipc_config_data layout.
+ */
+ copier_data = &ipc4_copier->data;
+ gtw_cfg_config_length = copier_data->gtw_cfg.config_length * 4;
+ tlv_size = ipc_size - sizeof(*copier_data) - gtw_cfg_config_length;
+
+ copier_data->gtw_cfg.config_length += tlv_size / 4;
+ memcpy(ipc_data, copier_data, sizeof(*copier_data));
+ copier_data->gtw_cfg.config_length = gtw_cfg_config_length / 4;
+
+ if (tlv_size)
+ memcpy(ipc_data + sizeof(*copier_data) + gtw_cfg_config_length,
+ &ipc4_copier->dma_config_tlv, tlv_size);
+
msg = &ipc4_copier->msg;
break;
}
next reply other threads:[~2026-08-20 11:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-20 11:06 gregkh [this message]
2026-08-20 11:45 ` FAILED: patch "[PATCH] ASoC: SOF: ipc4-topology: Refresh copier IPC payload before" failed to apply to 7.1-stable tree Péter Ujfalusi
2026-08-20 11:49 ` Greg KH
2026-08-20 12:50 ` Péter Ujfalusi
2026-08-20 12:48 ` [PATCH 7.1.y] ASoC: SOF: ipc4-topology: Refresh copier IPC payload before widget setup Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026082016-frisk-riches-3e59@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=broonie@kernel.org \
--cc=kai.vehmanen@linux.intel.com \
--cc=liam.r.girdwood@intel.com \
--cc=peter.ujfalusi@linux.intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox