Linux kernel -stable discussions
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Junjie Cao <junjie.cao@intel.com>,
	Linus Walleij <linusw@kernel.org>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.10.y] gpio: ml-ioh: use raw_spinlock_t for the register lock
Date: Mon, 24 Aug 2026 11:01:03 -0400	[thread overview]
Message-ID: <20260824150103.3723586-1-sashal@kernel.org> (raw)
In-Reply-To: <2026082012-sessions-framing-5b42@gregkh>

From: Junjie Cao <junjie.cao@intel.com>

[ Upstream commit 600411ea1f2443fdf5b1af9b6480f616d7aff9d0 ]

ioh_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave().  This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
ioh_irq_enable() and ioh_irq_disable() take the same lock from the
.irq_enable/.irq_disable callbacks, which are likewise invoked with
desc->lock held.

Convert the register lock to raw_spinlock_t.  The same lock also
serializes the GPIO direction/value callbacks and the suspend/resume
register save/restore, and those critical sections only perform short
sequences of MMIO register accesses (ioread32()/iowrite32()); the
.irq_set_type callback additionally emits a dev_warn() on an unsupported
type.  None of these are sleepable operations, so keeping this register
lock non-sleeping is appropriate for the irqchip callbacks and does not
change the GPIO-side locking contract.

This is the same fix as commit a02b8950d619 ("gpio: pch: use
raw_spinlock_t for the register lock"); this driver shares the same
structure as gpio-pch.

Fixes: 54be566317b6 ("gpio-ml-ioh: Support interrupt function")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260731032747.2987292-1-junjie.cao@intel.com
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-ml-ioh.c | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index 53d4abefa6ff2..d98c761b0d709 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -84,7 +84,7 @@ struct ioh_gpio {
 	u32 gpio_use_sel;
 	int ch;
 	int irq_base;
-	spinlock_t spinlock;
+	raw_spinlock_t spinlock;
 };
 
 static const int num_ports[] = {6, 12, 16, 16, 15, 16, 16, 12};
@@ -95,7 +95,7 @@ static void ioh_gpio_set(struct gpio_chip *gpio, unsigned nr, int val)
 	struct ioh_gpio *chip =	gpiochip_get_data(gpio);
 	unsigned long flags;
 
-	spin_lock_irqsave(&chip->spinlock, flags);
+	raw_spin_lock_irqsave(&chip->spinlock, flags);
 	reg_val = ioread32(&chip->reg->regs[chip->ch].po);
 	if (val)
 		reg_val |= (1 << nr);
@@ -103,7 +103,7 @@ static void ioh_gpio_set(struct gpio_chip *gpio, unsigned nr, int val)
 		reg_val &= ~(1 << nr);
 
 	iowrite32(reg_val, &chip->reg->regs[chip->ch].po);
-	spin_unlock_irqrestore(&chip->spinlock, flags);
+	raw_spin_unlock_irqrestore(&chip->spinlock, flags);
 }
 
 static int ioh_gpio_get(struct gpio_chip *gpio, unsigned nr)
@@ -121,7 +121,7 @@ static int ioh_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
 	u32 reg_val;
 	unsigned long flags;
 
-	spin_lock_irqsave(&chip->spinlock, flags);
+	raw_spin_lock_irqsave(&chip->spinlock, flags);
 	pm = ioread32(&chip->reg->regs[chip->ch].pm) &
 					((1 << num_ports[chip->ch]) - 1);
 	pm |= (1 << nr);
@@ -134,7 +134,7 @@ static int ioh_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
 		reg_val &= ~(1 << nr);
 	iowrite32(reg_val, &chip->reg->regs[chip->ch].po);
 
-	spin_unlock_irqrestore(&chip->spinlock, flags);
+	raw_spin_unlock_irqrestore(&chip->spinlock, flags);
 
 	return 0;
 }
@@ -145,12 +145,12 @@ static int ioh_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
 	u32 pm;
 	unsigned long flags;
 
-	spin_lock_irqsave(&chip->spinlock, flags);
+	raw_spin_lock_irqsave(&chip->spinlock, flags);
 	pm = ioread32(&chip->reg->regs[chip->ch].pm) &
 				((1 << num_ports[chip->ch]) - 1);
 	pm &= ~(1 << nr);
 	iowrite32(pm, &chip->reg->regs[chip->ch].pm);
-	spin_unlock_irqrestore(&chip->spinlock, flags);
+	raw_spin_unlock_irqrestore(&chip->spinlock, flags);
 
 	return 0;
 }
@@ -256,7 +256,7 @@ static int ioh_irq_type(struct irq_data *d, unsigned int type)
 	dev_dbg(chip->dev, "%s:irq=%d type=%d ch=%d pos=%d type=%d\n",
 		__func__, irq, type, ch, im_pos, type);
 
-	spin_lock_irqsave(&chip->spinlock, flags);
+	raw_spin_lock_irqsave(&chip->spinlock, flags);
 
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
@@ -296,7 +296,7 @@ static int ioh_irq_type(struct irq_data *d, unsigned int type)
 	ien = ioread32(&chip->reg->regs[chip->ch].ien);
 	iowrite32(ien | BIT(ch), &chip->reg->regs[chip->ch].ien);
 end:
-	spin_unlock_irqrestore(&chip->spinlock, flags);
+	raw_spin_unlock_irqrestore(&chip->spinlock, flags);
 
 	return 0;
 }
@@ -326,11 +326,11 @@ static void ioh_irq_disable(struct irq_data *d)
 	unsigned long flags;
 	u32 ien;
 
-	spin_lock_irqsave(&chip->spinlock, flags);
+	raw_spin_lock_irqsave(&chip->spinlock, flags);
 	ien = ioread32(&chip->reg->regs[chip->ch].ien);
 	ien &= ~(1 << (d->irq - chip->irq_base));
 	iowrite32(ien, &chip->reg->regs[chip->ch].ien);
-	spin_unlock_irqrestore(&chip->spinlock, flags);
+	raw_spin_unlock_irqrestore(&chip->spinlock, flags);
 }
 
 static void ioh_irq_enable(struct irq_data *d)
@@ -340,11 +340,11 @@ static void ioh_irq_enable(struct irq_data *d)
 	unsigned long flags;
 	u32 ien;
 
-	spin_lock_irqsave(&chip->spinlock, flags);
+	raw_spin_lock_irqsave(&chip->spinlock, flags);
 	ien = ioread32(&chip->reg->regs[chip->ch].ien);
 	ien |= 1 << (d->irq - chip->irq_base);
 	iowrite32(ien, &chip->reg->regs[chip->ch].ien);
-	spin_unlock_irqrestore(&chip->spinlock, flags);
+	raw_spin_unlock_irqrestore(&chip->spinlock, flags);
 }
 
 static irqreturn_t ioh_gpio_handler(int irq, void *dev_id)
@@ -441,7 +441,7 @@ static int ioh_gpio_probe(struct pci_dev *pdev,
 		chip->base = base;
 		chip->reg = chip->base;
 		chip->ch = i;
-		spin_lock_init(&chip->spinlock);
+		raw_spin_lock_init(&chip->spinlock);
 		ioh_gpio_setup(chip, num_ports[i]);
 		ret = gpiochip_add_data(&chip->gpio, chip);
 		if (ret) {
@@ -529,9 +529,9 @@ static int ioh_gpio_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct ioh_gpio *chip = pci_get_drvdata(pdev);
 	unsigned long flags;
 
-	spin_lock_irqsave(&chip->spinlock, flags);
+	raw_spin_lock_irqsave(&chip->spinlock, flags);
 	ioh_gpio_save_reg_conf(chip);
-	spin_unlock_irqrestore(&chip->spinlock, flags);
+	raw_spin_unlock_irqrestore(&chip->spinlock, flags);
 
 	ret = pci_save_state(pdev);
 	if (ret) {
@@ -563,11 +563,11 @@ static int ioh_gpio_resume(struct pci_dev *pdev)
 	}
 	pci_restore_state(pdev);
 
-	spin_lock_irqsave(&chip->spinlock, flags);
+	raw_spin_lock_irqsave(&chip->spinlock, flags);
 	iowrite32(0x01, &chip->reg->srst);
 	iowrite32(0x00, &chip->reg->srst);
 	ioh_gpio_restore_reg_conf(chip);
-	spin_unlock_irqrestore(&chip->spinlock, flags);
+	raw_spin_unlock_irqrestore(&chip->spinlock, flags);
 
 	return 0;
 }
-- 
2.53.0


      reply	other threads:[~2026-08-24 15:01 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-20 11:10 FAILED: patch "[PATCH] gpio: ml-ioh: use raw_spinlock_t for the register lock" failed to apply to 5.10-stable tree gregkh
2026-08-24 15:01 ` Sasha Levin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260824150103.3723586-1-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=junjie.cao@intel.com \
    --cc=linusw@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox