Linux kernel -stable discussions
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Chengfeng Ye <nicoyip.dev@gmail.com>,
	Luiz Augusto von Dentz <luiz.von.dentz@intel.com>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.6.y 2/2] Bluetooth: hci_sync: Fix accept list UAF during suspend
Date: Wed, 26 Aug 2026 14:03:45 -0400	[thread overview]
Message-ID: <20260826180345.2651531-2-sashal@kernel.org> (raw)
In-Reply-To: <20260826180345.2651531-1-sashal@kernel.org>

From: Chengfeng Ye <nicoyip.dev@gmail.com>

[ Upstream commit f57b399c4fa1501b2d5451f52d861ece86bcf3db ]

hci_update_event_filter_sync() walks hdev->accept_list while sending a
synchronous HCI command for each remote-wakeup device.  The suspend path
holds hdev->req_lock, but accept-list updates are serialized by hdev->lock.
Consequently, remove_device() can free the current list entry during the
controller wait.

The following interleaving causes the use-after-free:

  hci_update_event_filter_sync()    remove_device()
  fetch accept-list entry
  hci_set_event_filter_sync()
    wait for controller response    hci_dev_lock()
                                    list_del()
                                    kfree()
                                    hci_dev_unlock()
  read the freed list.next

KASAN reported:

  BUG: KASAN: slab-use-after-free in hci_suspend_sync+0x835/0x910
  Read of size 8 at addr ffff88810bec8440 by task kworker/0:1/10
  Workqueue: events vhci_suspend_work
  Call Trace:
   hci_suspend_sync+0x835/0x910
   hci_suspend_dev+0x182/0x450
   process_one_work+0x661/0x1090
   worker_thread+0x45b/0xd10

  Allocated by task 86:
   hci_bdaddr_list_add_with_flags+0x1a8/0x400
   add_device+0x381/0x820
   hci_sock_sendmsg+0x1033/0x1ea0

  Freed by task 91:
   kfree+0x131/0x3c0
   remove_device+0x429/0xb70
   hci_sock_sendmsg+0x1033/0x1ea0

Snapshot the remote-wakeup addresses under hdev->lock.  Release the lock
before sending HCI commands.  Clear the controller event filter before
building the snapshot, and skip allocation and the second list traversal
when there are no matching entries.  This preserves the original filter
and scan-state updates without retaining an accept-list node across a
controller wait.

Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-bluetooth/20260730092331.2069741-1-nicoyip.dev@gmail.com/
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_sync.c | 46 ++++++++++++++++++++++++++++++++--------
 1 file changed, 37 insertions(+), 9 deletions(-)

diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 4139dfdc758c7..05df059c46d8d 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -6141,6 +6141,8 @@ static int hci_pause_discovery_sync(struct hci_dev *hdev)
 static int hci_update_event_filter_sync(struct hci_dev *hdev)
 {
 	struct bdaddr_list_with_flags *b;
+	bdaddr_t *accept_list;
+	size_t i, num_entries = 0;
 	u8 scan = SCAN_DISABLED;
 	bool scanning = test_bit(HCI_PSCAN, &hdev->flags);
 	int err;
@@ -6157,23 +6159,49 @@ static int hci_update_event_filter_sync(struct hci_dev *hdev)
 	/* Always clear event filter when starting */
 	hci_clear_event_filter_sync(hdev);
 
-	list_for_each_entry(b, &hdev->accept_list, list) {
-		if (!(b->flags & HCI_CONN_FLAG_REMOTE_WAKEUP))
-			continue;
+	hci_dev_lock(hdev);
+
+	list_for_each_entry(b, &hdev->accept_list, list)
+		if (b->flags & HCI_CONN_FLAG_REMOTE_WAKEUP)
+			num_entries++;
 
-		bt_dev_dbg(hdev, "Adding event filters for %pMR", &b->bdaddr);
+	if (!num_entries) {
+		hci_dev_unlock(hdev);
+		goto update_scan;
+	}
 
-		err =  hci_set_event_filter_sync(hdev, HCI_FLT_CONN_SETUP,
-						 HCI_CONN_SETUP_ALLOW_BDADDR,
-						 &b->bdaddr,
-						 HCI_CONN_SETUP_AUTO_ON);
+	accept_list = kmalloc_array(num_entries, sizeof(*accept_list),
+				    GFP_KERNEL);
+	if (!accept_list) {
+		hci_dev_unlock(hdev);
+		return -ENOMEM;
+	}
+
+	i = 0;
+	list_for_each_entry(b, &hdev->accept_list, list)
+		if (b->flags & HCI_CONN_FLAG_REMOTE_WAKEUP)
+			bacpy(&accept_list[i++], &b->bdaddr);
+
+	hci_dev_unlock(hdev);
+
+	for (i = 0; i < num_entries; i++) {
+		bt_dev_dbg(hdev, "Adding event filters for %pMR",
+			   &accept_list[i]);
+
+		err = hci_set_event_filter_sync(hdev, HCI_FLT_CONN_SETUP,
+						HCI_CONN_SETUP_ALLOW_BDADDR,
+					 &accept_list[i],
+					 HCI_CONN_SETUP_AUTO_ON);
 		if (err)
 			bt_dev_err(hdev, "Failed to set event filter for %pMR",
-				   &b->bdaddr);
+				   &accept_list[i]);
 		else
 			scan = SCAN_PAGE;
 	}
 
+	kfree(accept_list);
+
+update_scan:
 	if (scan && !scanning)
 		hci_write_scan_enable_sync(hdev, scan);
 	else if (!scan && scanning)
-- 
2.53.0


      reply	other threads:[~2026-08-26 18:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-25 13:18 FAILED: patch "[PATCH] Bluetooth: hci_sync: Fix accept list UAF during suspend" failed to apply to 6.6-stable tree gregkh
2026-08-26 18:03 ` [PATCH 6.6.y 1/2] Bluetooth: hci_sync: Use bt_dev_err() to log error message in hci_update_event_filter_sync() Sasha Levin
2026-08-26 18:03   ` Sasha Levin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260826180345.2651531-2-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=luiz.von.dentz@intel.com \
    --cc=nicoyip.dev@gmail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox