From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Breno Leitao <leitao@debian.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Davidlohr Bueso <dave@stgolabs.net>,
Lance Yang <lance.yang@linux.dev>,
Oleg Nesterov <oleg@redhat.com>, Qian Cai <cai@lca.pw>,
SeongJae Park <sj@kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.18.y 1/2] mm/kmemleak: avoid soft lockup when scanning task stacks
Date: Thu, 3 Sep 2026 14:26:57 -0400 [thread overview]
Message-ID: <20260903182658.1452185-1-sashal@kernel.org> (raw)
In-Reply-To: <2026090344-parted-gnarly-5282@gregkh>
From: Breno Leitao <leitao@debian.org>
[ Upstream commit 5d10d4e19e6daa487f0cd0ea6cba472325de92f9 ]
Patch series "mm/kmemleak: avoid soft lockup when scanning task", v3.
kmemleak_scan() scans every task stack under one rcu_read_lock() with no
reschedule point, which can trip the soft lockup watchdog on hosts with
very many threads.
That prints the following message, depending on the workload+host
configuration:
watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537]
scan_block
kmemleak_scan
kmemleak_scan_thread
kthread
Patch 1 walks the tasks with find_ge_pid() so the scan reschedules between
tasks
Patches 2-3 let the scan loops stop early once a scan is interrupted.
This patch (of 3):
kmemleak_scan() walks every thread and scans its kernel stack under a
single rcu_read_lock() with no reschedule point. On a host with very many
threads -- amplified by KASAN/lockdep in debug builds -- this loop can hog
a CPU long enough to trip the soft lockup watchdog:
watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537]
scan_block
kmemleak_scan
kmemleak_scan_thread
kthread
A cond_resched() cannot be added directly: the loop runs inside an RCU
read-side critical section.
Walk the tasks one PID at a time with find_ge_pid(), taking the RCU read
lock only to look up and pin each task. The stack is then scanned with no
lock held, so cond_resched() runs between tasks and the scan stops early
on scan_should_stop(). This follows the next_tgid()/task_seq_get_next()
iteration pattern and keeps each RCU critical section short.
Link: https://lore.kernel.org/20260615-kmemleak-stack-resched-v3-0-acecd7d7fd92@debian.org
Link: https://lore.kernel.org/20260615-kmemleak-stack-resched-v3-1-acecd7d7fd92@debian.org
Fixes: c4b28963fd79 ("mm/kmemleak: rely on rcu for task stack scanning")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 3541a2b06ecd ("mm/kmemleak: report RCU-tasks quiescent states during the scan")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/kmemleak.c | 91 ++++++++++++++++++++++++++++++++++++++-------------
1 file changed, 68 insertions(+), 23 deletions(-)
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 415b154fdf38e..5109a9f84ea50 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1518,22 +1518,25 @@ static int scan_should_stop(void)
/*
* Scan a memory block (exclusive range) for valid pointers and add those
- * found to the gray list.
+ * found to the gray list. Return non-zero if the scan was interrupted.
*/
-static void scan_block(void *_start, void *_end,
- struct kmemleak_object *scanned)
+static int scan_block(void *_start, void *_end,
+ struct kmemleak_object *scanned)
{
unsigned long *ptr;
unsigned long *start = PTR_ALIGN(_start, BYTES_PER_POINTER);
unsigned long *end = _end - (BYTES_PER_POINTER - 1);
unsigned long flags;
+ int stop = 0;
raw_spin_lock_irqsave(&kmemleak_lock, flags);
for (ptr = start; ptr < end; ptr++) {
unsigned long pointer;
- if (scan_should_stop())
+ if (scan_should_stop()) {
+ stop = 1;
break;
+ }
kasan_disable_current();
pointer = *(unsigned long *)kasan_reset_tag((void *)ptr);
@@ -1543,22 +1546,28 @@ static void scan_block(void *_start, void *_end,
pointer_update_refs(scanned, pointer, OBJECT_PERCPU);
}
raw_spin_unlock_irqrestore(&kmemleak_lock, flags);
+
+ return stop;
}
/*
* Scan a large memory block in MAX_SCAN_SIZE chunks to reduce the latency.
+ * Return non-zero if the scan was interrupted.
*/
#ifdef CONFIG_SMP
-static void scan_large_block(void *start, void *end)
+static int scan_large_block(void *start, void *end)
{
void *next;
while (start < end) {
next = min(start + MAX_SCAN_SIZE, end);
- scan_block(start, next, NULL);
+ if (scan_block(start, next, NULL))
+ return 1;
start = next;
cond_resched();
}
+
+ return 0;
}
#endif
@@ -1689,6 +1698,43 @@ static void kmemleak_cond_resched(struct kmemleak_object *object)
put_object(object);
}
+/*
+ * Scan all task kernel stacks, rescheduling between tasks. Each task is looked
+ * up and pinned within its own RCU read-side section, so no lock is held across
+ * the scan and the walk cannot trip the soft lockup watchdog.
+ */
+static void kmemleak_scan_task_stacks(void)
+{
+ struct pid *pid;
+ int nr = 1;
+ int stop = 0;
+
+ do {
+ struct task_struct *p = NULL;
+
+ rcu_read_lock();
+ pid = find_ge_pid(nr, &init_pid_ns);
+ if (pid) {
+ nr = pid_nr(pid) + 1;
+ p = pid_task(pid, PIDTYPE_PID);
+ if (p)
+ get_task_struct(p);
+ }
+ rcu_read_unlock();
+
+ if (p) {
+ void *stack = try_get_task_stack(p);
+
+ if (stack) {
+ stop = scan_block(stack, stack + THREAD_SIZE, NULL);
+ put_task_stack(p);
+ }
+ put_task_struct(p);
+ }
+ cond_resched();
+ } while (pid && !stop);
+}
+
/*
* Scan data sections and all the referenced memory blocks allocated via the
* kernel's standard allocators. This function must be called with the
@@ -1700,6 +1746,7 @@ static void kmemleak_scan(void)
struct zone *zone;
int __maybe_unused i;
int new_leaks = 0;
+ int stop = 0;
jiffies_last_scan = jiffies;
@@ -1743,9 +1790,11 @@ static void kmemleak_scan(void)
#ifdef CONFIG_SMP
/* per-cpu sections scanning */
- for_each_possible_cpu(i)
- scan_large_block(__per_cpu_start + per_cpu_offset(i),
- __per_cpu_end + per_cpu_offset(i));
+ for_each_possible_cpu(i) {
+ if (scan_large_block(__per_cpu_start + per_cpu_offset(i),
+ __per_cpu_end + per_cpu_offset(i)))
+ goto scan_gray;
+ }
#endif
/*
@@ -1772,32 +1821,28 @@ static void kmemleak_scan(void)
/* only scan if page is in use */
if (page_count(page) == 0)
continue;
- scan_block(page, page + 1, NULL);
+ stop = scan_block(page, page + 1, NULL);
+ if (stop)
+ break;
}
+ if (stop)
+ break;
}
put_online_mems();
+ if (stop)
+ goto scan_gray;
/*
* Scanning the task stacks (may introduce false negatives).
*/
- if (kmemleak_stack_scan) {
- struct task_struct *p, *g;
-
- rcu_read_lock();
- for_each_process_thread(g, p) {
- void *stack = try_get_task_stack(p);
- if (stack) {
- scan_block(stack, stack + THREAD_SIZE, NULL);
- put_task_stack(p);
- }
- }
- rcu_read_unlock();
- }
+ if (kmemleak_stack_scan)
+ kmemleak_scan_task_stacks();
/*
* Scan the objects already referenced from the sections scanned
* above.
*/
+scan_gray:
scan_gray_list();
/*
--
2.53.0
next prev parent reply other threads:[~2026-09-03 18:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-03 10:47 FAILED: patch "[PATCH] mm/kmemleak: report RCU-tasks quiescent states during the" failed to apply to 6.18-stable tree gregkh
2026-09-03 18:26 ` Sasha Levin [this message]
2026-09-03 18:26 ` [PATCH 6.18.y 2/2] mm/kmemleak: report RCU-tasks quiescent states during the scan Sasha Levin
2026-09-09 12:35 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260903182658.1452185-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=cai@lca.pw \
--cc=catalin.marinas@arm.com \
--cc=dave@stgolabs.net \
--cc=lance.yang@linux.dev \
--cc=leitao@debian.org \
--cc=oleg@redhat.com \
--cc=sj@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox