From: <gregkh@linuxfoundation.org>
To: fanwu01@zju.edu.cn,sebastian.reichel@collabora.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] power: supply: charger-manager: register regulators before" failed to apply to 6.6-stable tree
Date: Thu, 03 Sep 2026 16:38:20 +0200 [thread overview]
Message-ID: <2026090320-shirt-underuse-eb92@gregkh> (raw)
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x c57cb36f76eb7ced45f57af1a890d8f3a6d76342
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026090320-shirt-underuse-eb92@gregkh' --subject-prefix 'PATCH 6.6.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From c57cb36f76eb7ced45f57af1a890d8f3a6d76342 Mon Sep 17 00:00:00 2001
From: Fan Wu <fanwu01@zju.edu.cn>
Date: Tue, 28 Jul 2026 03:01:23 +0000
Subject: [PATCH] power: supply: charger-manager: register regulators before
exposing sysfs
charger_manager_remove() and the err_reg_extcon probe error path free each
charger regulator with regulator_put() before tearing down the power_supply
sysfs entries (power_supply_unregister()). charger_manager_remove() also
calls try_charger_enable(cm, false) after the regulator_put() loop. A
concurrent write to a charger's externally_control sysfs attribute that
lands between regulator_put() and power_supply_unregister() can run
charger_externally_control_store() and call try_charger_enable(), which,
when charging is enabled, dereferences the already-freed consumer handle.
When charging is enabled, try_charger_enable(cm, false) in .remove() also
dereferences the freed handles directly. Both leave use-after-free windows.
Symmetrically, probe registers the sysfs entries (power_supply_register)
before acquiring the regulators (regulator_get, inside
charger_manager_register_extcon), so userspace can reach externally_control
before the regulators are available.
Split charger_manager_register_extcon() on the sync/async boundary:
charger_manager_get_regulators() (regulator_get only, no async producer)
now runs before power_supply_register() so sysfs is not live before
regulators are available, and charger_manager_register_extcon() keeps only
the extcon notifier/work setup, still after power_supply_register() so a
power_supply_register() failure cannot reach extcon setup. This keeps the
sysfs setup/teardown ordering symmetric without introducing an asynchronous
producer on the earlier probe-error path.
Move power_supply_unregister() and try_charger_enable(cm, false) ahead of
the regulator_put() loop on both teardown paths, and adjust err_reg_extcon
(power_supply_unregister() then fall through err_regulator for
regulator_put(); get_regulators self-rolls back on its own failure).
This does not address the separate extcon-notifier-driven deref of the same
handles, which needs its own synchronization design.
Found by an in-house static analysis tool.
Fixes: 3950c7865cd7 ("charger-manager: Add support sysfs entry for charger")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260728030123.230202-1-fanwu01@zju.edu.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
index 71b6e49a835f..fd4cd9cd2ce2 100644
--- a/drivers/power/supply/charger-manager.c
+++ b/drivers/power/supply/charger-manager.c
@@ -1014,6 +1014,29 @@ static int charger_extcon_init(struct charger_manager *cm,
return 0;
}
+static int charger_manager_get_regulators(struct charger_manager *cm)
+{
+ struct charger_desc *desc = cm->desc;
+ struct charger_regulator *charger;
+ int i, ret;
+
+ for (i = 0; i < desc->num_charger_regulators; i++) {
+ charger = &desc->charger_regulators[i];
+ charger->consumer = regulator_get(cm->dev,
+ charger->regulator_name);
+ if (IS_ERR(charger->consumer)) {
+ dev_err(cm->dev, "Cannot find charger(%s)\n",
+ charger->regulator_name);
+ ret = PTR_ERR(charger->consumer);
+ while (i-- > 0)
+ regulator_put(desc->charger_regulators[i].consumer);
+ return ret;
+ }
+ charger->cm = cm;
+ }
+ return 0;
+}
+
/**
* charger_manager_register_extcon - Register extcon device to receive state
* of charger cable.
@@ -1036,15 +1059,6 @@ static int charger_manager_register_extcon(struct charger_manager *cm)
for (i = 0; i < desc->num_charger_regulators; i++) {
charger = &desc->charger_regulators[i];
- charger->consumer = regulator_get(cm->dev,
- charger->regulator_name);
- if (IS_ERR(charger->consumer)) {
- dev_err(cm->dev, "Cannot find charger(%s)\n",
- charger->regulator_name);
- return PTR_ERR(charger->consumer);
- }
- charger->cm = cm;
-
for (j = 0; j < charger->num_cables; j++) {
struct charger_cable *cable = &charger->cables[j];
@@ -1580,13 +1594,23 @@ static int charger_manager_probe(struct platform_device *pdev)
}
psy_cfg.attr_grp = desc->sysfs_groups;
+ /*
+ * Acquire charger regulators before exposing the sysfs entries, so
+ * userspace cannot reach externally_control before the regulators
+ * (and charger->cm) are available. Mirrors the order in remove().
+ */
+ ret = charger_manager_get_regulators(cm);
+ if (ret < 0)
+ return ret;
+
cm->charger_psy = power_supply_register(&pdev->dev,
&cm->charger_psy_desc,
&psy_cfg);
if (IS_ERR(cm->charger_psy)) {
dev_err(&pdev->dev, "Cannot register charger-manager with name \"%s\"\n",
cm->charger_psy_desc.name);
- return PTR_ERR(cm->charger_psy);
+ ret = PTR_ERR(cm->charger_psy);
+ goto err_regulator;
}
/* Register extcon device for charger cable */
@@ -1620,11 +1644,11 @@ static int charger_manager_probe(struct platform_device *pdev)
return 0;
err_reg_extcon:
+ power_supply_unregister(cm->charger_psy);
+err_regulator:
for (i = 0; i < desc->num_charger_regulators; i++)
regulator_put(desc->charger_regulators[i].consumer);
- power_supply_unregister(cm->charger_psy);
-
return ret;
}
@@ -1642,12 +1666,12 @@ static void charger_manager_remove(struct platform_device *pdev)
cancel_work_sync(&setup_polling);
cancel_delayed_work_sync(&cm_monitor_work);
- for (i = 0 ; i < desc->num_charger_regulators ; i++)
- regulator_put(desc->charger_regulators[i].consumer);
+ try_charger_enable(cm, false);
power_supply_unregister(cm->charger_psy);
- try_charger_enable(cm, false);
+ for (i = 0 ; i < desc->num_charger_regulators ; i++)
+ regulator_put(desc->charger_regulators[i].consumer);
}
static const struct platform_device_id charger_manager_id[] = {
next reply other threads:[~2026-09-03 15:03 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-03 14:38 gregkh [this message]
2026-09-09 10:54 ` [PATCH 6.6.y 1/2] power: supply: charger-manager: Convert to platform remove callback returning void Sasha Levin
2026-09-09 10:54 ` [PATCH 6.6.y 2/2] power: supply: charger-manager: register regulators before exposing sysfs Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026090320-shirt-underuse-eb92@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=fanwu01@zju.edu.cn \
--cc=sebastian.reichel@collabora.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox