From: <gregkh@linuxfoundation.org>
To: doruk@0sec.ai,jkosina@suse.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver" failed to apply to 5.15-stable tree
Date: Thu, 03 Sep 2026 15:28:34 +0200 [thread overview]
Message-ID: <2026090334-elevation-quill-589f@gregkh> (raw)
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x a26705bd2e2728833e7a538ce91e58a5eeff496a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026090334-elevation-quill-589f@gregkh' --subject-prefix 'PATCH 5.15.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From a26705bd2e2728833e7a538ce91e58a5eeff496a Mon Sep 17 00:00:00 2001
From: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Fri, 24 Jul 2026 16:27:03 +0200
Subject: [PATCH] HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver
unbind
For GHL (Guitar Hero Live) dongles, sony_probe() arms a periodic timer:
ghl_magic_poke() (the timer callback) submits sc->ghl_urb, and the URB
completion ghl_magic_poke_cb() re-arms the timer with mod_timer().
sony_remove() drained the timer with timer_delete_sync() and then freed
the URB with usb_free_urb():
timer_delete_sync(&sc->ghl_poke_timer);
usb_free_urb(sc->ghl_urb);
timer_delete_sync() does not block re-arming, and while the URB is in
flight the timer is not pending, so the sync delete is a no-op. A URB
completion that runs after the delete re-arms the timer, and usb_free_urb()
only drops a reference -- it does not kill an in-flight URB. sc is
allocated with devm_kzalloc() and freed once sony_remove() returns, so the
re-armed ghl_poke_timer (embedded in sc) then fires on freed memory, a
use-after-free from timer softirq. This is a disconnect/rmmod race.
Poison the URB first, then shut the timer down, before freeing the URB.
usb_poison_urb() kills any in-flight URB and permanently rejects further
submissions, so a poke timer that is still pending cannot re-submit the
URB from ghl_magic_poke() in the window before timer_shutdown_sync() runs.
usb_kill_urb() would not suffice: it only cancels the in-flight URB and
leaves it submittable once it returns, so the pending timer could
re-submit it and put a fresh URB in flight over the freed sc.
timer_shutdown_sync() then drains any last callback and blocks re-arming.
The probe error path is unaffected: it is only reached before the timer
is armed.
Reproduced under KASAN on next-20260710 via dummy_hcd + raw-gadget
emulation of the GHL PS4 dongle (VID 0x1430 / PID 0x07bb): hid-sony binds
and arms the poke timer, the poke URB is held in flight, the driver is
unbound (freeing sc), then the URB is released. The completion re-arms the
timer on the freed sc, and the re-armed timer fires ~8 s later:
BUG: KASAN: slab-use-after-free in ghl_magic_poke+0x98/0xb0
Read of size 8 at addr ffff88810b02fd50 by task swapper/0/0
ghl_magic_poke+0x98/0xb0
call_timer_fn+0x35/0x2b0
__run_timers+0x69c/0x9a0
run_timer_softirq+0x173/0x2a0
Allocated by task 169: sony_probe
Freed by task 338: devres_release_group <- hid_device_remove (sony_remove)
Found by 0sec (https://0sec.ai) using automated source analysis.
Fixes: cc894ac55360 ("HID: sony: support for ghlive ps3/wii u dongles")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:multi-model
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 5a7ab08cb825..52d156e1db39 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -2424,7 +2424,9 @@ static void sony_remove(struct hid_device *hdev)
struct sony_sc *sc = hid_get_drvdata(hdev);
if (sc->quirks & (GHL_GUITAR_PS3WIIU | GHL_GUITAR_PS4)) {
- timer_delete_sync(&sc->ghl_poke_timer);
+ /* poison, not kill: a pending timer must not re-submit during teardown */
+ usb_poison_urb(sc->ghl_urb);
+ timer_shutdown_sync(&sc->ghl_poke_timer);
usb_free_urb(sc->ghl_urb);
}
next reply other threads:[~2026-09-03 13:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-03 13:28 gregkh [this message]
2026-09-07 20:00 ` [PATCH 5.15.y] HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026090334-elevation-quill-589f@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=doruk@0sec.ai \
--cc=jkosina@suse.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox