From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Fan Wu <fanwu01@zju.edu.cn>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.10.y 2/2] usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
Date: Fri, 4 Sep 2026 10:08:52 -0400 [thread overview]
Message-ID: <20260904140852.672483-2-sashal@kernel.org> (raw)
In-Reply-To: <20260904140852.672483-1-sashal@kernel.org>
From: Fan Wu <fanwu01@zju.edu.cn>
[ Upstream commit c27d13ce4bab80fbdf6523928071b6c24b37606c ]
In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a
self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and
at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via
mod_timer(). Both recover the same udc through container_of and dereference
it on every iteration.
Neither teardown path cancels this cycle. udc is devm-allocated, so it is
freed after at91udc_remove() returns, and is likewise freed when probe
fails and devres runs. A timer callback or work item that is pending or
running at either point dereferences the freed udc.
Add at91_udc_shutdown_vbus_timer() and call it from at91udc_remove() and
from the usb_add_gadget_udc() failure path in probe; the remaining probe
error paths fail before the timer is armed. timer_shutdown_sync() waits
for a running callback and clears timer->function, which makes the work
handler's mod_timer() a permanent no-op; cancel_work_sync() then drains
any pending or running work whose re-arm attempt now does nothing. The
timer must be shut down first, since cancelling the work alone would let
the timer re-queue it. The guard mirrors probe: in IRQ mode the timer and
work_struct are never initialized.
This does not require a fault; a normal driver unbind can interleave with
an already queued work item.
This issue was found by an in-house static analysis tool.
Fixes: 4037242c4f5f ("ARM: 6209/3: at91_udc: Add vbus polarity and polling mode")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260719042839.3167094-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/at91_udc.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
index c2637bb5a65ae..dfd320eb86732 100644
--- a/drivers/usb/gadget/udc/at91_udc.c
+++ b/drivers/usb/gadget/udc/at91_udc.c
@@ -1803,6 +1803,19 @@ static void at91udc_of_init(struct at91_udc *udc, struct device_node *np)
udc->caps = match->data;
}
+/*
+ * The work handler re-arms this timer, so shut the timer down before
+ * draining the work; otherwise it restarts the polling cycle.
+ */
+static void at91_udc_shutdown_vbus_timer(struct at91_udc *udc)
+{
+ if (!(udc->board.vbus_pin && udc->board.vbus_polled))
+ return;
+
+ timer_shutdown_sync(&udc->vbus_timer);
+ cancel_work_sync(&udc->vbus_timer_work);
+}
+
static int at91udc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1924,7 +1937,7 @@ static int at91udc_probe(struct platform_device *pdev)
}
retval = usb_add_gadget_udc(dev, &udc->gadget);
if (retval)
- goto err_unprepare_iclk;
+ goto err_shutdown_vbus;
dev_set_drvdata(dev, udc);
device_init_wakeup(dev, 1);
create_debug_file(udc);
@@ -1932,6 +1945,8 @@ static int at91udc_probe(struct platform_device *pdev)
INFO("%s version %s\n", driver_name, DRIVER_VERSION);
return 0;
+err_shutdown_vbus:
+ at91_udc_shutdown_vbus_timer(udc);
err_unprepare_iclk:
clk_unprepare(udc->iclk);
err_unprepare_fclk:
@@ -1950,6 +1965,9 @@ static void at91udc_remove(struct platform_device *pdev)
DBG("remove\n");
usb_del_gadget_udc(&udc->gadget);
+
+ at91_udc_shutdown_vbus_timer(udc);
+
if (udc->driver) {
dev_err(&pdev->dev,
"Driver still in use but removing anyhow\n");
--
2.53.0
prev parent reply other threads:[~2026-09-04 14:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-03 12:39 FAILED: patch "[PATCH] usb: gadget: at91_udc: drain polled-VBUS timer/work before" failed to apply to 5.10-stable tree gregkh
2026-09-04 14:08 ` [PATCH 5.10.y 1/2] usb: gadget: at91_udc: Convert to platform remove callback returning void Sasha Levin
2026-09-04 14:08 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260904140852.672483-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=fanwu01@zju.edu.cn \
--cc=gregkh@linuxfoundation.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox