From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Max Kellermann <max.kellermann@ionos.com>,
Zhang Yi <yi.zhang@huawei.com>, Jan Kara <jack@suse.cz>,
Theodore Ts'o <tytso@mit.edu>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.15.y 3/3] jbd2: bound shrinker scans by examined checkpoint buffers
Date: Tue, 8 Sep 2026 12:15:48 -0400 [thread overview]
Message-ID: <20260908161548.2612016-3-sashal@kernel.org> (raw)
In-Reply-To: <20260908161548.2612016-1-sashal@kernel.org>
From: Max Kellermann <max.kellermann@ionos.com>
[ Upstream commit 15cb16496446b94e67f7abcb049b8e2c75cd3d02 ]
The jbd2 shrinker currently accounts only checkpoint buffers that it
successfully releases against nr_to_scan. Busy buffers therefore do not
consume the scan budget.
If a checkpoint transaction contains mostly busy buffers, the shrinker
can scan its entire checkpoint list while holding journal->j_list_lock.
Large checkpoint lists can result in excessive lock hold times and leave
other CPUs spinning on j_list_lock, causing soft lockups or RCU stalls.
Pass nr_to_scan into journal_shrink_one_cp_list() and decrement it for
every buffer examined, including busy buffers. Pass NULL from checkpoint
cleanup paths so their existing full-list behavior is preserved.
This restores the scan-budget semantics that existed before
journal_shrink_one_cp_list() was changed to always scan a complete
checkpoint list.
Fixes: b98dba273a0e ("jbd2: remove journal_clean_one_cp_list()")
Cc: stable@vger.kernel.org
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260713102229.1598812-3-max.kellermann@ionos.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/jbd2/checkpoint.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index 36c64cf44e005..724a6ff505089 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -370,15 +370,16 @@ int jbd2_cleanup_journal_tail(journal_t *journal)
/*
* journal_shrink_one_cp_list
*
- * Find all the written-back checkpoint buffers in the given list
- * and try to release them. If the whole transaction is released, set
- * the 'released' parameter. Return the number of released checkpointed
- * buffers.
+ * Find written-back checkpoint buffers in the given list and try to release
+ * them. If 'nr_to_scan' is set, scan at most that many buffers. If the whole
+ * transaction is released, set the 'released' parameter. Return the number of
+ * released checkpointed buffers.
*
* Called with j_list_lock held.
*/
static unsigned long journal_shrink_one_cp_list(struct journal_head *jh,
enum jbd2_shrink_type type,
+ unsigned long *nr_to_scan,
bool *released)
{
struct journal_head *last_jh;
@@ -387,13 +388,15 @@ static unsigned long journal_shrink_one_cp_list(struct journal_head *jh,
int ret;
*released = false;
- if (!jh)
+ if (!jh || (nr_to_scan && !*nr_to_scan))
return 0;
last_jh = jh->b_cpprev;
do {
jh = next_jh;
next_jh = jh->b_cpnext;
+ if (nr_to_scan)
+ (*nr_to_scan)--;
if (type == JBD2_SHRINK_DESTROY) {
ret = __jbd2_journal_remove_checkpoint(jh);
@@ -414,7 +417,7 @@ static unsigned long journal_shrink_one_cp_list(struct journal_head *jh,
if (need_resched())
break;
- } while (jh != last_jh);
+ } while (jh != last_jh && (!nr_to_scan || *nr_to_scan));
return nr_freed;
}
@@ -436,7 +439,6 @@ unsigned long jbd2_journal_shrink_checkpoint_list(journal_t *journal,
tid_t first_tid = 0, last_tid = 0, next_tid = 0;
tid_t tid = 0;
unsigned long nr_freed = 0;
- unsigned long freed;
bool first_set = false;
again:
@@ -469,10 +471,9 @@ unsigned long jbd2_journal_shrink_checkpoint_list(journal_t *journal,
next_transaction = transaction->t_cpnext;
tid = transaction->t_tid;
- freed = journal_shrink_one_cp_list(transaction->t_checkpoint_list,
- JBD2_SHRINK_BUSY_SKIP, &released);
- nr_freed += freed;
- (*nr_to_scan) -= min(*nr_to_scan, freed);
+ nr_freed += journal_shrink_one_cp_list(transaction->t_checkpoint_list,
+ JBD2_SHRINK_BUSY_SKIP,
+ nr_to_scan, &released);
if (*nr_to_scan == 0)
break;
if (need_resched() || spin_needbreak(&journal->j_list_lock))
@@ -528,7 +529,7 @@ void __jbd2_journal_clean_checkpoint_list(journal_t *journal,
transaction = next_transaction;
next_transaction = transaction->t_cpnext;
journal_shrink_one_cp_list(transaction->t_checkpoint_list,
- type, &released);
+ type, NULL, &released);
/*
* This function only frees up some memory if possible so we
* dont have an obligation to finish processing. Bail out if
--
2.53.0
prev parent reply other threads:[~2026-09-08 16:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-03 13:59 FAILED: patch "[PATCH] jbd2: bound shrinker scans by examined checkpoint buffers" failed to apply to 5.15-stable tree gregkh
2026-09-08 16:15 ` [PATCH 5.15.y 1/3] jbd2: use shrink_type type instead of bool type for __jbd2_journal_clean_checkpoint_list() Sasha Levin
2026-09-08 16:15 ` [PATCH 5.15.y 2/3] jbd2: add prefix 'jbd2' for 'shrink_type' Sasha Levin
2026-09-08 16:15 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260908161548.2612016-3-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=jack@suse.cz \
--cc=max.kellermann@ionos.com \
--cc=stable@vger.kernel.org \
--cc=tytso@mit.edu \
--cc=yi.zhang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox