From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Zhang Heng <zhangheng@kylinos.cn>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Joerg Roedel <jroedel@suse.de>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.10.y 1/2] iommu/msm: Use helper function devm_clk_get_prepared()
Date: Wed, 9 Sep 2026 10:58:25 -0400 [thread overview]
Message-ID: <20260909145826.2742978-1-sashal@kernel.org> (raw)
In-Reply-To: <2026090343-awkward-washcloth-0722@gregkh>
From: Zhang Heng <zhangheng@kylinos.cn>
[ Upstream commit afc0cbc6e25b37dc9ba11d415ea6858902a7f04b ]
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare() can now be replaced
by devm_clk_get_prepared() when driver prepares the clocks for the whole
lifetime of the device. Moreover, it is no longer necessary to unprepare
the clocks explicitly.
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250103113059.463033-1-zhangheng@kylinos.cn
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[5.15 dependency adaptation]
Retain this branch's dev_err() diagnostics, bus_set_iommu() call and
subsys_initcall() registration. Convert both clocks to the already
available devm_clk_get_prepared() helper, return directly from probe
failures, and remove the obsolete int-returning remove callback and
manual clk_unprepare() calls. No new functions are introduced.
This preserves the managed clock cleanup required by the registration
failure unwind in 535a200220ca2c83bc8bf54bd2cbe045d6ee70c4. That target
applies cleanly with a three-way merge while retaining the stable bus
registration.
Stable-dep-of: 535a200220ca ("iommu/msm: Unwind probe state on registration failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/msm_iommu.c | 52 ++++++++-------------------------------
1 file changed, 10 insertions(+), 42 deletions(-)
diff --git a/drivers/iommu/msm_iommu.c b/drivers/iommu/msm_iommu.c
index 149f2e53b39d4..5c83cebbf49a7 100644
--- a/drivers/iommu/msm_iommu.c
+++ b/drivers/iommu/msm_iommu.c
@@ -712,51 +712,34 @@ static int msm_iommu_probe(struct platform_device *pdev)
iommu->dev = &pdev->dev;
INIT_LIST_HEAD(&iommu->ctx_list);
- iommu->pclk = devm_clk_get(iommu->dev, "smmu_pclk");
+ iommu->pclk = devm_clk_get_prepared(iommu->dev, "smmu_pclk");
if (IS_ERR(iommu->pclk)) {
dev_err(iommu->dev, "could not get smmu_pclk\n");
return PTR_ERR(iommu->pclk);
}
- ret = clk_prepare(iommu->pclk);
- if (ret) {
- dev_err(iommu->dev, "could not prepare smmu_pclk\n");
- return ret;
- }
-
- iommu->clk = devm_clk_get(iommu->dev, "iommu_clk");
+ iommu->clk = devm_clk_get_prepared(iommu->dev, "iommu_clk");
if (IS_ERR(iommu->clk)) {
dev_err(iommu->dev, "could not get iommu_clk\n");
- clk_unprepare(iommu->pclk);
return PTR_ERR(iommu->clk);
}
- ret = clk_prepare(iommu->clk);
- if (ret) {
- dev_err(iommu->dev, "could not prepare iommu_clk\n");
- clk_unprepare(iommu->pclk);
- return ret;
- }
-
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
iommu->base = devm_ioremap_resource(iommu->dev, r);
if (IS_ERR(iommu->base)) {
dev_err(iommu->dev, "could not get iommu base\n");
- ret = PTR_ERR(iommu->base);
- goto fail;
+ return PTR_ERR(iommu->base);
}
ioaddr = r->start;
iommu->irq = platform_get_irq(pdev, 0);
- if (iommu->irq < 0) {
- ret = -ENODEV;
- goto fail;
- }
+ if (iommu->irq < 0)
+ return -ENODEV;
ret = of_property_read_u32(iommu->dev->of_node, "qcom,ncb", &val);
if (ret) {
dev_err(iommu->dev, "could not get ncb\n");
- goto fail;
+ return ret;
}
iommu->ncb = val;
@@ -771,8 +754,7 @@ static int msm_iommu_probe(struct platform_device *pdev)
if (!par) {
pr_err("Invalid PAR value detected\n");
- ret = -ENODEV;
- goto fail;
+ return -ENODEV;
}
ret = devm_request_threaded_irq(iommu->dev, iommu->irq, NULL,
@@ -782,7 +764,7 @@ static int msm_iommu_probe(struct platform_device *pdev)
iommu);
if (ret) {
pr_err("Request IRQ %d failed with ret=%d\n", iommu->irq, ret);
- goto fail;
+ return ret;
}
list_add(&iommu->dev_node, &qcom_iommu_devices);
@@ -791,7 +773,7 @@ static int msm_iommu_probe(struct platform_device *pdev)
"msm-smmu.%pa", &ioaddr);
if (ret) {
pr_err("Could not add msm-smmu at %pa to sysfs\n", &ioaddr);
- goto fail;
+ return ret;
}
iommu_device_set_ops(&iommu->iommu, &msm_iommu_ops);
@@ -800,7 +782,7 @@ static int msm_iommu_probe(struct platform_device *pdev)
ret = iommu_device_register(&iommu->iommu);
if (ret) {
pr_err("Could not register msm-smmu at %pa\n", &ioaddr);
- goto fail;
+ return ret;
}
bus_set_iommu(&platform_bus_type, &msm_iommu_ops);
@@ -809,10 +791,6 @@ static int msm_iommu_probe(struct platform_device *pdev)
iommu->base, iommu->irq, iommu->ncb);
return ret;
-fail:
- clk_unprepare(iommu->clk);
- clk_unprepare(iommu->pclk);
- return ret;
}
static const struct of_device_id msm_iommu_dt_match[] = {
@@ -820,22 +798,12 @@ static const struct of_device_id msm_iommu_dt_match[] = {
{}
};
-static int msm_iommu_remove(struct platform_device *pdev)
-{
- struct msm_iommu_dev *iommu = platform_get_drvdata(pdev);
-
- clk_unprepare(iommu->clk);
- clk_unprepare(iommu->pclk);
- return 0;
-}
-
static struct platform_driver msm_iommu_driver = {
.driver = {
.name = "msm_iommu",
.of_match_table = msm_iommu_dt_match,
},
.probe = msm_iommu_probe,
- .remove = msm_iommu_remove,
};
static int __init msm_iommu_driver_init(void)
--
2.53.0
next prev parent reply other threads:[~2026-09-09 14:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-03 14:44 FAILED: patch "[PATCH] iommu/msm: Unwind probe state on registration failure" failed to apply to 5.10-stable tree gregkh
2026-09-09 14:58 ` Sasha Levin [this message]
2026-09-09 14:58 ` [PATCH 5.10.y 2/2] iommu/msm: Unwind probe state on registration failure Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260909145826.2742978-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=jroedel@suse.de \
--cc=stable@vger.kernel.org \
--cc=zhangheng@kylinos.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox