From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Fan Wu <fanwu01@zju.edu.cn>, Ping-Ke Shih <pkshih@realtek.com>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.6.y] wifi: rtl8xxxu: fix use-after-free from rx_urb_wq on stop
Date: Wed, 9 Sep 2026 16:42:18 -0400 [thread overview]
Message-ID: <20260909204218.3659750-1-sashal@kernel.org> (raw)
In-Reply-To: <2026090417-tweak-sinner-8280@gregkh>
From: Fan Wu <fanwu01@zju.edu.cn>
[ Upstream commit 6c080026ecc17eecb103f8927c64ea73a74bb818 ]
rtl8xxxu arms rx_urb_wq from the RX completion path:
rtl8xxxu_rx_complete() hands the URB to rtl8xxxu_queue_rx_urb(), which
queues it on rx_urb_pending_list and, once the list grows past
RTL8XXXU_RX_URB_PENDING_WATER, schedules rx_urb_wq. The worker
rtl8xxxu_rx_urb_work() drains rx_urb_pending_list, recovers priv through
container_of, and resubmits each URB through rtl8xxxu_submit_rx_urb(),
which anchors it on rx_anchor and dereferences priv->udev.
rtl8xxxu_stop() cancels the sibling work items (c2hcmd_work, ra_watchdog,
update_beacon_work) but never cancels rx_urb_wq, so a worker armed during
the last burst of RX traffic can run rtl8xxxu_rx_urb_work() after
rtl8xxxu_disconnect() has called ieee80211_free_hw(), which frees priv,
producing a use-after-free. The window opens under active RX traffic
(pending count above the watermark) followed by a disconnect.
There are two teardown races to close:
* rtl8xxxu_queue_rx_urb() decided whether to enqueue under rx_urb_lock
but called schedule_work() after dropping the lock. A completion
that observed shutdown == false and released the lock could then call
schedule_work() after rtl8xxxu_stop() had set shutdown and
cancel_work_sync() had already returned, arming the worker to run
after the teardown. Move schedule_work() under the same !shutdown
branch so the arming decision is atomic with the shutdown check.
* rtl8xxxu_rx_urb_work() anchors every URB it drained back onto
rx_anchor through rtl8xxxu_submit_rx_urb(). A worker still running
when usb_kill_anchored_urbs(&priv->rx_anchor) returned would submit a
URB that escaped the kill. In rtl8xxxu_stop(), call
cancel_work_sync(&priv->rx_urb_wq) before the kill so the worker is
drained first.
After priv->shutdown is set under rx_urb_lock, completions can no longer
queue rx_urb_wq. cancel_work_sync() then drains the last queued or running
worker, and the following usb_kill_anchored_urbs() kills the URBs it may
have submitted.
rtl8xxxu_disconnect() is covered because ieee80211_unregister_hw()
guarantees .stop() runs for a live interface before ieee80211_free_hw()
frees priv. The probe error path needs no cancel: rx_urb_wq is
INIT_WORK()'d there but cannot have been scheduled, since no URB is
submitted before ieee80211_register_hw() succeeds.
This bug was found by static analysis.
Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260630033117.3377-1-fanwu01@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 5a57ffb53acee..bbaebdd821c8d 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5829,14 +5829,19 @@ static void rtl8xxxu_queue_rx_urb(struct rtl8xxxu_priv *priv,
{
struct sk_buff *skb;
unsigned long flags;
- int pending = 0;
spin_lock_irqsave(&priv->rx_urb_lock, flags);
if (!priv->shutdown) {
list_add_tail(&rx_urb->list, &priv->rx_urb_pending_list);
priv->rx_urb_pending_count++;
- pending = priv->rx_urb_pending_count;
+ /*
+ * Arm the worker under rx_urb_lock so this is atomic with the
+ * shutdown check: moving it out of the lock would let a
+ * completion arm the work after rtl8xxxu_stop() canceled it.
+ */
+ if (priv->rx_urb_pending_count > RTL8XXXU_RX_URB_PENDING_WATER)
+ schedule_work(&priv->rx_urb_wq);
} else {
skb = (struct sk_buff *)rx_urb->urb.context;
dev_kfree_skb_irq(skb);
@@ -5844,9 +5849,6 @@ static void rtl8xxxu_queue_rx_urb(struct rtl8xxxu_priv *priv,
}
spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
-
- if (pending > RTL8XXXU_RX_URB_PENDING_WATER)
- schedule_work(&priv->rx_urb_wq);
}
static void rtl8xxxu_rx_urb_work(struct work_struct *work)
@@ -7281,6 +7283,13 @@ static void rtl8xxxu_stop(struct ieee80211_hw *hw)
priv->shutdown = true;
spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
+ /*
+ * Cancel before killing rx_anchor: the worker re-anchors every URB
+ * it drained via rtl8xxxu_submit_rx_urb(), so a worker still running
+ * after the kill could submit a URB that escapes it.
+ */
+ cancel_work_sync(&priv->rx_urb_wq);
+
usb_kill_anchored_urbs(&priv->rx_anchor);
usb_kill_anchored_urbs(&priv->tx_anchor);
if (priv->usb_interrupts)
--
2.53.0
prev parent reply other threads:[~2026-09-09 20:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-04 4:38 FAILED: patch "[PATCH] wifi: rtl8xxxu: fix use-after-free from rx_urb_wq on stop" failed to apply to 6.6-stable tree gregkh
2026-09-09 20:42 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260909204218.3659750-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=fanwu01@zju.edu.cn \
--cc=pkshih@realtek.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox