From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Rounak Das <rounakdas2025@gmail.com>,
"Borislav Petkov (AMD)" <bp@alien8.de>,
Dinh Nguyen <dinguyen@kernel.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.10.y 2/3] EDAC/altera: Use ECC manager compatible to select A10/S10 IRQ layout
Date: Wed, 16 Sep 2026 16:32:53 -0400 [thread overview]
Message-ID: <20260916203254.2573996-2-sashal@kernel.org> (raw)
In-Reply-To: <20260916203254.2573996-1-sashal@kernel.org>
From: Rounak Das <rounakdas2025@gmail.com>
[ Upstream commit d4486fc3098e176cb4a29fee037216484761f9ca ]
The SDMMC ECC IRQ layout selection uses CONFIG_64BIT to distinguish between
Arria10 and Stratix10 paths.
Detect the SoC once at probe via the device match table (.data) store it in
struct altr_arria10_edac, and use it instead of CONFIG_64BIT.
This keeps the decision correct for every ECC child device (OCRAM, SD/MMC,
etc.) and avoids any runtime compatible lookup.
Signed-off-by: Rounak Das <rounakdas2025@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://patch.msgid.link/20260708091135.94114-2-rounakdas2025@gmail.com
Stable-dep-of: 9868f5c077df ("EDAC/altera: Use parent device for devres in altr_portb_setup()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/edac/altera_edac.c | 107 +++++++++++++++++++------------------
drivers/edac/altera_edac.h | 1 +
2 files changed, 55 insertions(+), 53 deletions(-)
diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 53d1b1fc07a50..8feef22629d92 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -1470,6 +1470,7 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
int edac_idx, rc;
struct device_node *np;
const struct edac_device_prv_data *prv = &a10_sdmmceccb_data;
+ bool is_s10 = device->edac->is_s10;
rc = altr_check_ecc_deps(device);
if (rc)
@@ -1511,15 +1512,14 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
/*
* Update the PortB IRQs - A10 has 4, S10 has 2, Index accordingly
- *
- * FIXME: Instead of ifdefs with different architectures the driver
- * should properly use compatibles.
*/
-#ifdef CONFIG_64BIT
- altdev->sb_irq = irq_of_parse_and_map(np, 1);
-#else
- altdev->sb_irq = irq_of_parse_and_map(np, 2);
-#endif
+
+ /* Using compatibles to determine the IRQ Index */
+ if (is_s10)
+ altdev->sb_irq = irq_of_parse_and_map(np, 1);
+ else
+ altdev->sb_irq = irq_of_parse_and_map(np, 2);
+
if (!altdev->sb_irq) {
edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB SBIRQ alloc\n");
rc = -ENODEV;
@@ -1533,29 +1533,28 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
goto err_release_group_1;
}
-#ifdef CONFIG_64BIT
- /* Use IRQ to determine SError origin instead of assigning IRQ */
- rc = of_property_read_u32_index(np, "interrupts", 1, &altdev->db_irq);
- if (rc) {
- edac_printk(KERN_ERR, EDAC_DEVICE,
- "Error PortB DBIRQ alloc\n");
- goto err_release_group_1;
- }
-#else
- altdev->db_irq = irq_of_parse_and_map(np, 3);
- if (!altdev->db_irq) {
- edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
- rc = -ENODEV;
- goto err_release_group_1;
- }
- rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
- prv->ecc_irq_handler, IRQF_TRIGGER_HIGH,
- ecc_name, altdev);
- if (rc) {
- edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n");
- goto err_release_group_1;
+ if (is_s10) {
+ /* Use IRQ to determine SError origin instead of assigning IRQ */
+ rc = of_property_read_u32_index(np, "interrupts", 1, &altdev->db_irq);
+ if (rc) {
+ edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
+ goto err_release_group_1;
+ }
+ } else {
+ altdev->db_irq = irq_of_parse_and_map(np, 3);
+ if (!altdev->db_irq) {
+ edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
+ rc = -ENODEV;
+ goto err_release_group_1;
+ }
+ rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
+ prv->ecc_irq_handler, IRQF_TRIGGER_HIGH,
+ ecc_name, altdev);
+ if (rc) {
+ edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n");
+ goto err_release_group_1;
+ }
}
-#endif
rc = edac_device_add_device(dci);
if (rc) {
@@ -1941,29 +1940,29 @@ static int altr_edac_a10_device_add(struct altr_arria10_edac *edac,
goto err_release_group1;
}
-#ifdef CONFIG_64BIT
- /* Use IRQ to determine SError origin instead of assigning IRQ */
- rc = of_property_read_u32_index(np, "interrupts", 0, &altdev->db_irq);
- if (rc) {
- edac_printk(KERN_ERR, EDAC_DEVICE,
- "Unable to parse DB IRQ index\n");
- goto err_release_group1;
- }
-#else
- altdev->db_irq = irq_of_parse_and_map(np, 1);
- if (!altdev->db_irq) {
- edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating DBIRQ\n");
- rc = -ENODEV;
- goto err_release_group1;
- }
- rc = devm_request_irq(edac->dev, altdev->db_irq, prv->ecc_irq_handler,
- IRQF_TRIGGER_HIGH,
- ecc_name, altdev);
- if (rc) {
- edac_printk(KERN_ERR, EDAC_DEVICE, "No DBERR IRQ resource\n");
- goto err_release_group1;
+ if (edac->is_s10) {
+ /* Use IRQ to determine SError origin instead of assigning IRQ */
+ rc = of_property_read_u32_index(np, "interrupts", 0, &altdev->db_irq);
+ if (rc) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "Unable to parse DB IRQ index\n");
+ goto err_release_group1;
+ }
+ } else {
+ altdev->db_irq = irq_of_parse_and_map(np, 1);
+ if (!altdev->db_irq) {
+ edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating DBIRQ\n");
+ rc = -ENODEV;
+ goto err_release_group1;
+ }
+ rc = devm_request_irq(edac->dev, altdev->db_irq, prv->ecc_irq_handler,
+ IRQF_TRIGGER_HIGH,
+ ecc_name, altdev);
+ if (rc) {
+ edac_printk(KERN_ERR, EDAC_DEVICE, "No DBERR IRQ resource\n");
+ goto err_release_group1;
+ }
}
-#endif
rc = edac_device_add_device(dci);
if (rc) {
@@ -2089,6 +2088,8 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, edac);
INIT_LIST_HEAD(&edac->a10_ecc_devices);
+ edac->is_s10 = !!device_get_match_data(&pdev->dev);
+
edac->ecc_mgr_map =
altr_sysmgr_regmap_lookup_by_phandle(pdev->dev.of_node,
"altr,sysmgr-syscon");
@@ -2177,7 +2178,7 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
static const struct of_device_id altr_edac_a10_of_match[] = {
{ .compatible = "altr,socfpga-a10-ecc-manager" },
- { .compatible = "altr,socfpga-s10-ecc-manager" },
+ { .compatible = "altr,socfpga-s10-ecc-manager", .data = (void *)1 },
{},
};
MODULE_DEVICE_TABLE(of, altr_edac_a10_of_match);
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index 7248d24c4908d..5b26ef0cfe600 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -395,6 +395,7 @@ struct altr_arria10_edac {
struct irq_chip irq_chip;
struct list_head a10_ecc_devices;
struct notifier_block panic_notifier;
+ bool is_s10;
};
#endif /* #ifndef _ALTERA_EDAC_H */
--
2.53.0
next prev parent reply other threads:[~2026-09-16 20:33 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-16 15:16 FAILED: patch "[PATCH] EDAC/altera: Use parent device for devres in" failed to apply to 5.10-stable tree gregkh
2026-09-16 20:32 ` [PATCH 5.10.y 1/3] EDAC: altera: merge ARCH_SOCFPGA and ARCH_STRATIX10 Sasha Levin
2026-09-16 20:32 ` Sasha Levin [this message]
2026-09-16 20:32 ` [PATCH 5.10.y 3/3] EDAC/altera: Use parent device for devres in altr_portb_setup() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260916203254.2573996-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=bp@alien8.de \
--cc=dinguyen@kernel.org \
--cc=rounakdas2025@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox