Linux kernel -stable discussions
 help / color / mirror / Atom feed
From: Lee Jones <lee@kernel.org>
To: lee@kernel.org
Cc: stable@vger.kernel.org, sdolan@janestreet.com,
	dave.hansen@intel.com, sashal@kernel.org, x86@kernel.org,
	Seth Forshee <sforshee@kernel.org>,
	Eric Hagberg <ehagberg@janestreet.com>
Subject: [STABLE v5.15] x86/mm: Fix check/use ordering in switch_mm_irqs_off()
Date: Mon, 28 Sep 2026 14:42:05 +0000	[thread overview]
Message-ID: <20260928144205.3881537-1-lee@kernel.org> (raw)

From: Stephen Dolan <sdolan@janestreet.com>

This is a stable-specific fix. There is no single upstream commit to
cherry-pick; the equivalent mainline fix is commit 83b0177a6c48
("x86/mm: Fix SMP ordering in switch_mm_irqs_off()"), which is in
v6.18 but does not apply to these trees because the surrounding code
was refactored.

The backports of commit fea4e317f9e7 ("x86/mm: Eliminate window where
TLB flushes may be inadvertently skipped") -- the fix for
CVE-2025-37964 -- to the 6.1, 6.6 and 6.12 trees ended up with two
code blocks in the wrong order relative to mainline. The fix depends
on setting cpu_tlbstate.loaded_mm to LOADED_MM_SWITCHING *before*
reading tlb_gen, so that a concurrent TLB shootdown either sees
LOADED_MM_SWITCHING and sends the IPI, or the switching CPU sees the
updated tlb_gen. In the stable trees the write of LOADED_MM_SWITCHING
was placed after the tlb_gen read, so the race window fea4e317f9e7 was
meant to close is still open and CVE-2025-37964 is unfixed there:
a process can be left running with stale TLB entries, which typically
manifests as rare, hard-to-bisect memory corruption or segfaults.

This has been confirmed by several independent parties:

  - reproduced on 6.1.y/6.6.y/6.12.y with the test program in [1],
    and confirmed fixed by this patch
  - Seth Forshee saw segfaults on 6.12.y within ~30 minutes of running
    a test workload; with this patch it ran 18 hours cleanly [2]
  - Greg Thelen reports 6.6.y- and 6.12.y-based test failures fixed by
    this patch [3]

Dave Hansen acked the patch [4] and has no objection to it going into
stable [5].

The patch below is against 6.12.y; the identical change applies to
6.1.y and 6.6.y. (The cpumask_test_cpu()/smp_mb() portion of the
mainline fix is not needed here because commit 209954cbc7d0
("x86/mm/tlb: Update mm_cpumask lazily") was never backported to these
trees.)

[1] https://lore.kernel.org/lkml/CAHDw0oGd0B4=uuv8NGqbUQ_ZVmSheU2bN70e4QhFXWvuAZdt2w@mail.gmail.com/
[2] https://lore.kernel.org/lkml/aZYWXe739XUJrBld@do-x1carbon/
[3] https://lore.kernel.org/lkml/CAHH2K0brx9omC9QYyB6Lio3t_1Lf8v=VaFoiaG23UgQ-aec89Q@mail.gmail.com/
[4] https://lore.kernel.org/lkml/281e8018-5506-4a79-8775-e0de7e58b95f@intel.com/
[5] https://lore.kernel.org/lkml/86421ee5-5332-46c2-bb48-d40310b818be@intel.com/

Fixes: fea4e317f9e7 ("x86/mm: Eliminate window where TLB flushes may be inadvertently skipped")  # 6.1.y/6.6.y/6.12.y backports
Acked-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Seth Forshee <sforshee@kernel.org>
Tested-by: Eric Hagberg <ehagberg@janestreet.com>
Signed-off-by: Stephen Dolan <sdolan@janestreet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[Lee: The v5.15.y backport of fea4e317f9e7 (12f703811af0) placed the
      LOADED_MM_SWITCHING write after the tlb_gen read too, so v5.15.y
      suffers from the same issue.  Applies cleanly]
Signed-off-by: Lee Jones <lee@kernel.org>
---
 arch/x86/mm/tlb.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 11a43d373bae..f6e541c24ae2 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -596,6 +596,14 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 		 */
 		cond_mitigation(tsk);
 
+		/*
+		 * Indicate that CR3 is about to change. nmi_uaccess_okay()
+		 * and others are sensitive to the window where mm_cpumask(),
+		 * CR3 and cpu_tlbstate.loaded_mm are not all in sync.
+		 */
+		this_cpu_write(cpu_tlbstate.loaded_mm, LOADED_MM_SWITCHING);
+		barrier();
+
 		/*
 		 * Stop remote flushes for the previous mm.
 		 * Skip kernel threads; we never send init_mm TLB flushing IPIs,
@@ -615,14 +623,6 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 		next_tlb_gen = atomic64_read(&next->context.tlb_gen);
 
 		choose_new_asid(next, next_tlb_gen, &new_asid, &need_flush);
-
-		/*
-		 * Indicate that CR3 is about to change. nmi_uaccess_okay()
-		 * and others are sensitive to the window where mm_cpumask(),
-		 * CR3 and cpu_tlbstate.loaded_mm are not all in sync.
- 		 */
-		this_cpu_write(cpu_tlbstate.loaded_mm, LOADED_MM_SWITCHING);
-		barrier();
 	}
 
 	if (need_flush) {
-- 
2.56.0.rc1.315.gc6ed9934b7-goog


             reply	other threads:[~2026-09-28 14:42 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-28 14:42 Lee Jones [this message]
2026-09-28 22:39 ` [STABLE v5.15] x86/mm: Fix check/use ordering in switch_mm_irqs_off() Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260928144205.3881537-1-lee@kernel.org \
    --to=lee@kernel.org \
    --cc=dave.hansen@intel.com \
    --cc=ehagberg@janestreet.com \
    --cc=sashal@kernel.org \
    --cc=sdolan@janestreet.com \
    --cc=sforshee@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox