From: <gregkh@linuxfoundation.org>
To: ejc3@meta.com,pbonzini@redhat.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] x86/kvm: Don't consume async #PF flags on a kernel #PF in NMI" failed to apply to 5.10-stable tree
Date: Wed, 21 Oct 2026 20:50:16 +0200 [thread overview]
Message-ID: <2026102116-champion-appliance-bfe2@gregkh> (raw)
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 81d99abe2bd81379abfb595e403bbbee6fbfc624
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026102116-champion-appliance-bfe2@gregkh' --subject-prefix 'PATCH 5.10.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 81d99abe2bd81379abfb595e403bbbee6fbfc624 Mon Sep 17 00:00:00 2001
From: EJ Campbell <ejc3@meta.com>
Date: Tue, 29 Sep 2026 11:12:32 -0700
Subject: [PATCH] x86/kvm: Don't consume async #PF flags on a kernel #PF in NMI
context
An async #PF "page not present" event arrives through the #PF vector,
and its reason sits in the per-CPU apf_reason.flags until
__kvm_handle_async_pf() reads and clears it. If an NMI arrives after
the event is injected and before the #PF handler reads the flags, and
the NMI handler itself takes a #PF, that fault reads and clears the
flags belonging to the #PF it interrupted. It then finds interrupts
disabled in the NMI context it interrupted, and panics:
Kernel panic - not syncing: Host injected async #PF in interrupt
disabled region
Call Trace:
<NMI>
panic+0x52/0x60
__kvm_handle_async_pf+0xb0/0xb0
exc_page_fault+0x71/0xb0
asm_exc_page_fault+0x27/0x30
RIP: 0010:__get_user_nocheck_8+0x6/0x20
perf_callchain_user+0x147/0x1a0
get_perf_callchain+0x12d/0x1c0
...
perf_event_nmi_handler+0x26/0x50
exc_nmi+0xe8/0x110
RIP: 0010:asm_exc_page_fault+0x0/0x30
</NMI>
The last RIP line shows the NMI landing on the first instruction of
the #PF entry. perf with user call chains takes such a fault: the
sampling NMI walks the user stack with __get_user(), which faults when
a saved frame pointer is not a valid user address or the walk runs off
the top of the stack. The same window exists when KVM, running as an
L1 hypervisor with DELIVERY_AS_PF_VMEXIT, reads the flags itself after
a #PF VM-exit.
The NMI entry code saves and restores CR2 for this nesting, but not the
async #PF reason. Andy Lutomirski described the race, with perf as the
example, when async #PF delivery was reworked in 2020 [1]. Saving and
clearing the flags across the NMI, next to CR2, was discussed there but
not merged.
Since that rework, Linux has stopped setting KVM_ASYNC_PF_SEND_ALWAYS,
so the host delivers "page not present" only for user mode faults and
a kernel-mode fault in NMI context (including kernel-mode #MC and #DB)
cannot be an async page fault. In that case, return without touching
the flags so that the interrupted handler finds them intact.
Tested on v7.3-rc5 in a 4-vCPU, 2 GiB guest restored from a snapshot
whose memory is served on demand through userfaultfd, so that reading
it back takes async #PFs, while every thread samples hardware cycles
with user call chains and points its frame pointer at an unmapped page.
Without this patch the guest panicked as above in 3 of 3 runs. With it,
the guest survived 3 of 3 runs of 60 seconds, and the host counted
148,441 to 153,334 kvm_async_pf_not_present events in the first 20
seconds of each. On 6.18.50 the results were the same: the guest
panicked without the patch and survived with it.
Link: https://lore.kernel.org/all/ed71d0967113a35f670a9625a058b8e6e0b2f104.1583547991.git.luto@kernel.org/ [1]
Link: https://lore.kernel.org/all/20211126123145.2772-1-jiangshanlai@gmail.com/ [2]
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: EJ Campbell <ejc3@meta.com>
Link: https://patch.msgid.link/CADkxfh-uQTca_6jB1JPDq1MsKffF_UKGQR339oQSJNcoV75GNQ@mail.gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index 6b0a5861ccb8..d8dd2cadcbf7 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -265,11 +265,39 @@ noinstr u32 kvm_read_and_reset_apf_flags(void)
}
EXPORT_SYMBOL_FOR_KVM(kvm_read_and_reset_apf_flags);
+static __always_inline bool kvm_apf_reason_pending(void)
+{
+ return __this_cpu_read(async_pf_enabled) &&
+ __this_cpu_read(apf_reason.flags);
+}
+
noinstr bool __kvm_handle_async_pf(struct pt_regs *regs, u32 token)
{
- u32 flags = kvm_read_and_reset_apf_flags();
irqentry_state_t state;
+ u32 flags;
+ if (!kvm_apf_reason_pending())
+ return false;
+
+ /*
+ * The guest does not enable KVM_ASYNC_PF_SEND_ALWAYS, so the host
+ * delivers async #PF only to user mode (or as a #PF VM-exit, which KVM
+ * reads itself). A #PF from kernel mode can still arrive between that
+ * delivery and the read of the reason flags, inside an NMI that
+ * interrupted it, for instance perf reading user memory for a call
+ * chain. Such a fault is not async, so leave the async PF flags
+ * untouched for the outer handler. Outside NMI context, on the other
+ * hand, async PF flags on a kernel-mode fault mean the host is broken.
+ */
+ if (!user_mode(regs)) {
+ if (likely(in_nmi()))
+ return false;
+ state = irqentry_enter(regs);
+ instrumentation_begin();
+ panic("Host injected async #PF in kernel mode\n");
+ }
+
+ flags = kvm_read_and_reset_apf_flags();
if (!flags)
return false;
@@ -285,8 +313,6 @@ noinstr bool __kvm_handle_async_pf(struct pt_regs *regs, u32 token)
panic("Host injected async #PF in interrupt disabled region\n");
if (flags & KVM_PV_REASON_PAGE_NOT_PRESENT) {
- if (unlikely(!(user_mode(regs))))
- panic("Host injected async #PF in kernel mode\n");
/* Page is swapped out by the host. */
kvm_async_pf_task_wait_schedule(token);
} else {
next reply other threads:[~2026-10-21 18:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-21 18:50 gregkh [this message]
2026-10-23 12:20 ` [PATCH 5.10.y] x86/kvm: Don't consume async #PF flags on a kernel #PF in NMI context Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026102116-champion-appliance-bfe2@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=ejc3@meta.com \
--cc=pbonzini@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox