From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Lee Jones <lee@kernel.org>, Ping Cheng <ping.cheng@wacom.com>,
Jiri Kosina <jkosina@suse.com>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.15.y] HID: wacom: Advertise SW_MUTE_DEVICE capability prior to registration
Date: Wed, 4 Nov 2026 10:58:37 -0500 [thread overview]
Message-ID: <20261104155732.3922024-1-sashal@kernel.org> (raw)
In-Reply-To: <2026110416-undertone-chatter-7d31@gregkh>
From: Lee Jones <lee@kernel.org>
[ Upstream commit ba16e5ffbaa10fde960918d69af5e49f2b3fdd5e ]
Input subsystem guidelines require that device capabilities are advertised
before the input device is registered. The Wacom driver was violating
this by advertising the SW_MUTE_DEVICE capability post-registration in
wacom_set_shared_values() (and duplicating it in device-specific setup
cases).
Resolve this by moving the SW_MUTE_DEVICE capability setup to
wacom_setup_touch_input_capabilities() for all touch devices that support
it.
For generic touch devices whose capabilities depend on mute switch
usages parsed from a sibling Pen/Pad interface, defer registration
with -EPROBE_DEFER until the sibling has parsed its descriptors and
initialized shared capabilities.
Cc: stable@vger.kernel.org
Fixes: d2ec58aee8b1 ("HID: wacom: generic: support generic touch switch")
Signed-off-by: Lee Jones <lee@kernel.org>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Tested-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
[ sashal: retained devm_add_action() with explicit failure cleanup instead of devm_add_action_or_reset() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/wacom_sys.c | 88 ++++++++++++++++++++++++++++++++++-------
drivers/hid/wacom_wac.c | 5 +++
2 files changed, 78 insertions(+), 15 deletions(-)
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index b5e6605a83753..4588bb153a93a 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -902,6 +902,9 @@ static int wacom_add_shared_data(struct hid_device *hdev)
wacom_wac->shared = &data->shared;
+ if (wacom_wac->has_mute_touch_switch)
+ WRITE_ONCE(wacom_wac->shared->has_mute_touch_switch, true);
+
retval = devm_add_action(&hdev->dev, wacom_remove_shared_data, wacom);
if (retval) {
mutex_unlock(&wacom_udev_list_lock);
@@ -909,11 +912,6 @@ static int wacom_add_shared_data(struct hid_device *hdev)
return retval;
}
- if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH)
- wacom_wac->shared->touch = hdev;
- else if (wacom_wac->features.device_type & WACOM_DEVICETYPE_PEN)
- wacom_wac->shared->pen = hdev;
-
out:
mutex_unlock(&wacom_udev_list_lock);
return retval;
@@ -2314,13 +2312,12 @@ static void wacom_release_resources(struct wacom *wacom)
static void wacom_set_shared_values(struct wacom_wac *wacom_wac)
{
- if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH) {
- wacom_wac->shared->type = wacom_wac->features.type;
- wacom_wac->shared->touch_input = wacom_wac->touch_input;
- }
+ struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
+
+ guard(mutex)(&wacom_udev_list_lock);
if (wacom_wac->has_mute_touch_switch) {
- wacom_wac->shared->has_mute_touch_switch = true;
+ WRITE_ONCE(wacom_wac->shared->has_mute_touch_switch, true);
/* Hardware touch switch may be off. Wait until
* we know the switch state to decide is_touch_on.
* Softkey state should be initialized to "on" to
@@ -2330,12 +2327,67 @@ static void wacom_set_shared_values(struct wacom_wac *wacom_wac)
WRITE_ONCE(wacom_wac->shared->is_touch_on, true);
}
- if (wacom_wac->shared->has_mute_touch_switch &&
- wacom_wac->shared->touch_input) {
- set_bit(EV_SW, wacom_wac->shared->touch_input->evbit);
- input_set_capability(wacom_wac->shared->touch_input, EV_SW,
- SW_MUTE_DEVICE);
+ if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH) {
+ wacom_wac->shared->type = wacom_wac->features.type;
+ wacom_wac->shared->touch_input = wacom_wac->touch_input;
+ wacom_wac->shared->touch = wacom->hdev;
+ } else if (wacom_wac->features.device_type & WACOM_DEVICETYPE_PEN) {
+ /* Pairs with smp_load_acquire() in wacom_sibling_pending() */
+ smp_store_release(&wacom_wac->shared->pen, wacom->hdev);
+ }
+}
+
+static bool wacom_sibling_pending(struct wacom *wacom)
+{
+ const struct wacom_features *features = &wacom->wacom_wac.features;
+ struct hid_device *hdev = wacom->hdev;
+ struct usb_interface *sibling_intf;
+ int ifnum;
+
+ if (features->type != HID_GENERIC ||
+ !(features->device_type & WACOM_DEVICETYPE_TOUCH))
+ return false;
+
+ if (wacom->wacom_wac.shared) {
+ /* Pairs with smp_store_release() in wacom_set_shared_values() */
+ if (smp_load_acquire(&wacom->wacom_wac.shared->pen))
+ return false;
}
+
+ if (!hid_is_usb(hdev) || !wacom->usbdev || !wacom->intf ||
+ !wacom->intf->cur_altsetting)
+ return false;
+
+ ifnum = wacom->intf->cur_altsetting->desc.bInterfaceNumber;
+
+ /*
+ * On composite Wacom devices, the Pen interface is always interface 0.
+ * If the Touch interface is interface 0, there is no sibling Pen
+ * interface on this device (standalone touch device).
+ */
+ if (ifnum == 0)
+ return false;
+
+ /* Look for the sibling Pen interface at interface 0 */
+ sibling_intf = usb_ifnum_to_if(wacom->usbdev, 0);
+ if (!sibling_intf || !sibling_intf->cur_altsetting)
+ return false;
+
+ if (sibling_intf->cur_altsetting->desc.bInterfaceClass !=
+ USB_INTERFACE_CLASS_HID)
+ return false;
+
+ if (sibling_intf->cur_altsetting->desc.bInterfaceSubClass == 1 &&
+ (sibling_intf->cur_altsetting->desc.bInterfaceProtocol == 1 ||
+ sibling_intf->cur_altsetting->desc.bInterfaceProtocol == 2))
+ return false;
+
+ /*
+ * Interface 0 is a candidate HID interface on this composite device
+ * whose probe has not completed yet (shared->pen is NULL). Defer until
+ * interface 0 finishes probing and registers shared values.
+ */
+ return true;
}
static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
@@ -2411,6 +2463,11 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
if (error)
goto fail;
+ if (wacom_sibling_pending(wacom)) {
+ error = -EPROBE_DEFER;
+ goto fail;
+ }
+
if (!(features->device_type & WACOM_DEVICETYPE_WL_MONITOR) &&
(features->quirks & WACOM_QUIRK_BATTERY)) {
error = wacom_initialize_battery(wacom);
@@ -2475,6 +2532,7 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
fail_hw_stop:
hid_hw_stop(hdev);
+ cancel_delayed_work_sync(&wacom->init_work);
fail:
wacom_release_resources(wacom);
return error;
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 96164a97ff9cd..b1fd91aa5e370 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -3912,6 +3912,11 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
if (features->type == HID_GENERIC) {
hid_dbg(hdev, "generic touch setup\n");
+ if (wacom_wac->has_mute_touch_switch ||
+ (wacom_wac->shared && READ_ONCE(wacom_wac->shared->has_mute_touch_switch))) {
+ input_set_capability(input_dev, EV_SW, SW_MUTE_DEVICE);
+ wacom_wac->has_mute_touch_switch = true;
+ }
/* setup has already been done */
return 0;
}
--
2.53.0
prev parent reply other threads:[~2026-11-04 15:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-04 13:43 FAILED: patch "[PATCH] HID: wacom: Advertise SW_MUTE_DEVICE capability prior to" failed to apply to 5.15-stable tree gregkh
2026-11-04 15:58 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261104155732.3922024-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=jkosina@suse.com \
--cc=lee@kernel.org \
--cc=ping.cheng@wacom.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox