From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Balakrishnan Sambath <balakrishnan.s@microchip.com>,
Eugen Hristev <ehristev@kernel.org>,
Hans Verkuil <hverkuil+cisco@kernel.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.6.y 2/2] media: microchip-isc: take a reference on the parsed endpoints
Date: Wed, 4 Nov 2026 17:54:06 -0500 [thread overview]
Message-ID: <20261104225337.851869-2-sashal@kernel.org> (raw)
In-Reply-To: <20261104225337.851869-1-sashal@kernel.org>
From: Balakrishnan Sambath <balakrishnan.s@microchip.com>
[ Upstream commit f2eb2fd388bf3f1959556a326e797cacca341c86 ]
for_each_endpoint_of_node() drops the reference on the current node as
it advances. xisc_parse_dt() and isc_parse_dt() store the node in
subdev_entity->epn and release it later with of_node_put(), but never
took their own reference, so the stored pointer refers to an
already-released node. This underflows the refcount and can
use-after-free, reachable through the camera device tree overlay.
Take a reference with of_node_get() when storing the node, and drop it
in microchip_isc_subdev_cleanup() so the entities the bind loop never
reaches on an early exit do not leak it.
Fixes: c9aa973884a1 ("media: atmel: atmel-isc: add microchip-xisc driver")
Fixes: d6701f13bd07 ("media: atmel: Use v4l2_async_notifier_add_fwnode_remote_subdev")
Cc: stable@vger.kernel.org
Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
Reviewed-by: Eugen Hristev <ehristev@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../platform/microchip/microchip-isc-base.c | 6 ++++++
.../platform/microchip/microchip-sama5d2-isc.c | 17 ++++++++++++-----
.../platform/microchip/microchip-sama7g5-isc.c | 17 ++++++++++++-----
3 files changed, 30 insertions(+), 10 deletions(-)
diff --git a/drivers/media/platform/microchip/microchip-isc-base.c b/drivers/media/platform/microchip/microchip-isc-base.c
index 8dbf7bc1e863b..78a26babf3894 100644
--- a/drivers/media/platform/microchip/microchip-isc-base.c
+++ b/drivers/media/platform/microchip/microchip-isc-base.c
@@ -1902,6 +1902,12 @@ void microchip_isc_subdev_cleanup(struct isc_device *isc)
list_for_each_entry(subdev_entity, &isc->subdev_entities, list) {
v4l2_async_nf_unregister(&subdev_entity->notifier);
v4l2_async_nf_cleanup(&subdev_entity->notifier);
+ /*
+ * Release the endpoint reference taken while parsing. It is
+ * NULL for entities the bind loop already consumed, so this
+ * only drops the ones left over on an early exit.
+ */
+ of_node_put(subdev_entity->epn);
}
INIT_LIST_HEAD(&isc->subdev_entities);
diff --git a/drivers/media/platform/microchip/microchip-sama5d2-isc.c b/drivers/media/platform/microchip/microchip-sama5d2-isc.c
index 60b6d922d764e..4033bfc96bb77 100644
--- a/drivers/media/platform/microchip/microchip-sama5d2-isc.c
+++ b/drivers/media/platform/microchip/microchip-sama5d2-isc.c
@@ -356,28 +356,30 @@ static int isc_parse_dt(struct device *dev, struct isc_device *isc)
struct device_node *epn;
struct isc_subdev_entity *subdev_entity;
unsigned int flags;
+ int ret;
INIT_LIST_HEAD(&isc->subdev_entities);
for_each_endpoint_of_node(np, epn) {
struct v4l2_fwnode_endpoint v4l2_epn = { .bus_type = 0 };
- int ret;
ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(epn),
&v4l2_epn);
if (ret) {
- of_node_put(epn);
dev_err(dev, "Could not parse the endpoint\n");
- return -EINVAL;
+ of_node_put(epn);
+ ret = -EINVAL;
+ goto err_cleanup;
}
subdev_entity = devm_kzalloc(dev, sizeof(*subdev_entity),
GFP_KERNEL);
if (!subdev_entity) {
of_node_put(epn);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err_cleanup;
}
- subdev_entity->epn = epn;
+ subdev_entity->epn = of_node_get(epn);
flags = v4l2_epn.bus.parallel.flags;
@@ -398,6 +400,11 @@ static int isc_parse_dt(struct device *dev, struct isc_device *isc)
}
return 0;
+
+err_cleanup:
+ list_for_each_entry(subdev_entity, &isc->subdev_entities, list)
+ of_node_put(subdev_entity->epn);
+ return ret;
}
static int microchip_isc_probe(struct platform_device *pdev)
diff --git a/drivers/media/platform/microchip/microchip-sama7g5-isc.c b/drivers/media/platform/microchip/microchip-sama7g5-isc.c
index e97abe3e35af0..58cfbf6fcd668 100644
--- a/drivers/media/platform/microchip/microchip-sama7g5-isc.c
+++ b/drivers/media/platform/microchip/microchip-sama7g5-isc.c
@@ -340,6 +340,7 @@ static int xisc_parse_dt(struct device *dev, struct isc_device *isc)
struct isc_subdev_entity *subdev_entity;
unsigned int flags;
bool mipi_mode;
+ int ret;
INIT_LIST_HEAD(&isc->subdev_entities);
@@ -347,23 +348,24 @@ static int xisc_parse_dt(struct device *dev, struct isc_device *isc)
for_each_endpoint_of_node(np, epn) {
struct v4l2_fwnode_endpoint v4l2_epn = { .bus_type = 0 };
- int ret;
ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(epn),
&v4l2_epn);
if (ret) {
- of_node_put(epn);
dev_err(dev, "Could not parse the endpoint\n");
- return -EINVAL;
+ of_node_put(epn);
+ ret = -EINVAL;
+ goto err_cleanup;
}
subdev_entity = devm_kzalloc(dev, sizeof(*subdev_entity),
GFP_KERNEL);
if (!subdev_entity) {
of_node_put(epn);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err_cleanup;
}
- subdev_entity->epn = epn;
+ subdev_entity->epn = of_node_get(epn);
flags = v4l2_epn.bus.parallel.flags;
@@ -387,6 +389,11 @@ static int xisc_parse_dt(struct device *dev, struct isc_device *isc)
}
return 0;
+
+err_cleanup:
+ list_for_each_entry(subdev_entity, &isc->subdev_entities, list)
+ of_node_put(subdev_entity->epn);
+ return ret;
}
static int microchip_xisc_probe(struct platform_device *pdev)
--
2.53.0
prev parent reply other threads:[~2026-11-04 22:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-04 14:17 FAILED: patch "[PATCH] media: microchip-isc: take a reference on the parsed" failed to apply to 6.6-stable tree gregkh
2026-11-04 22:54 ` [PATCH 6.6.y 1/2] media: platform: microchip: use for_each_endpoint_of_node() Sasha Levin
2026-11-04 22:54 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261104225337.851869-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=balakrishnan.s@microchip.com \
--cc=ehristev@kernel.org \
--cc=hverkuil+cisco@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox