From: <gregkh@linuxfoundation.org>
To: jlayton@kernel.org,cel@kernel.org,okorniev@redhat.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] NFSD: stop registering with rpcbind after a failure in" failed to apply to 6.18-stable tree
Date: Wed, 04 Nov 2026 13:54:24 -0500 [thread overview]
Message-ID: <2026110424-scope-designed-5ca1@gregkh> (raw)
The patch below does not apply to the 6.18-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.18.y
git checkout FETCH_HEAD
git cherry-pick -x bf0f3a37e6ccb78ae80cc6eb2edde4f033c7574c
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026110424-scope-designed-5ca1@gregkh' --subject-prefix 'PATCH 6.18.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From bf0f3a37e6ccb78ae80cc6eb2edde4f033c7574c Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@kernel.org>
Date: Tue, 1 Sep 2026 09:39:48 -0400
Subject: [PATCH] NFSD: stop registering with rpcbind after a failure in
listener_set
nfsd_nl_listener_set_doit() calls svc_xprt_create_from_sa() once for each
requested listener and passes flags of 0, so every listener registers with
rpcbind on its own. A rpcbind that accepts the connection and never replies
therefore costs one timeout for each entry. With the cap of 1024 entries
the request can hold nfsd_mutex for about 34 minutes, which is roughly 17
times the hung-task threshold.
One failure is enough to know that the next call will not fare better.
Read svc_rpcb_failure_count() before the create loop, and pass
SVC_SOCK_ANONYMOUS for the rest of the request once the count moves.
Fixes: 16a471177496 ("NFSD: add listener-{set,get} netlink command")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Link: https://syzkaller.appspot.com/bug?extid=c7eae0eb80858a2dba0f
Suggested-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260901-nfsd-nl-hang-v5-10-a540d86668b0@kernel.org
Signed-off-by: Chuck Lever <cel@kernel.org>
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 779fd244c771..967c21ff7199 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -2092,7 +2092,10 @@ int nfsd_nl_listener_set_doit(struct sk_buff *skb, struct genl_info *info)
const struct nlattr *bad_attr = NULL;
struct svc_xprt *xprt, *tmp;
const char *bad_xprt = NULL;
+ unsigned int rpcb_failures;
const struct nlattr *attr;
+ bool skipped_rpcb = false;
+ bool bad_rpcb = false;
struct svc_serv *serv;
LIST_HEAD(permsocks);
struct nfsd_net *nn;
@@ -2182,13 +2185,16 @@ int nfsd_nl_listener_set_doit(struct sk_buff *skb, struct genl_info *info)
if (delete)
svc_xprt_destroy_all(serv, net, false);
+ rpcb_failures = svc_rpcb_failure_count(serv);
+
/* walk list of addrs again, open any that still don't exist */
nlmsg_for_each_attr_type(attr, NFSD_A_SERVER_SOCK_ADDR, info->nlhdr,
GENL_HDRLEN, rem) {
struct nlattr *tb[NFSD_A_SOCK_MAX + 1];
const char *xcl_name;
struct sockaddr *sa;
- int ret;
+ bool hit_rpcb;
+ int flags, ret;
/* validated up front in nfsd_nl_validate_listeners() */
if (nla_parse_nested(tb, NFSD_A_SOCK_MAX, attr,
@@ -2207,12 +2213,27 @@ int nfsd_nl_listener_set_doit(struct sk_buff *skb, struct genl_info *info)
continue;
}
- ret = svc_xprt_create_from_sa(serv, xcl_name, net, sa, 0,
+ flags = skipped_rpcb ? SVC_SOCK_ANONYMOUS : 0;
+ ret = svc_xprt_create_from_sa(serv, xcl_name, net, sa, flags,
current_cred());
+
+ hit_rpcb = false;
+ if (!skipped_rpcb &&
+ svc_rpcb_failure_count(serv) != rpcb_failures) {
+ skipped_rpcb = true;
+ hit_rpcb = true;
+ if (ret < 0)
+ ret = svc_xprt_create_from_sa(serv, xcl_name,
+ net, sa,
+ SVC_SOCK_ANONYMOUS,
+ current_cred());
+ }
+
/* always save the latest error */
if (ret < 0) {
bad_attr = attr;
bad_xprt = xcl_name;
+ bad_rpcb = hit_rpcb;
err = ret;
}
}
@@ -2224,8 +2245,21 @@ int nfsd_nl_listener_set_doit(struct sk_buff *skb, struct genl_info *info)
*/
if (err) {
NL_SET_BAD_ATTR(info->extack, bad_attr);
- NL_SET_ERR_MSG_FMT(info->extack, "cannot create %s listener",
- bad_xprt);
+ if (bad_rpcb)
+ NL_SET_ERR_MSG_FMT(info->extack,
+ "cannot create %s listener; rpcbind did not answer",
+ bad_xprt);
+ else if (skipped_rpcb)
+ NL_SET_ERR_MSG_FMT(info->extack,
+ "cannot create %s listener; rpcbind did not answer earlier, so some listeners are not registered",
+ bad_xprt);
+ else
+ NL_SET_ERR_MSG_FMT(info->extack,
+ "cannot create %s listener",
+ bad_xprt);
+ } else if (skipped_rpcb) {
+ NL_SET_ERR_MSG(info->extack,
+ "rpcbind did not answer, some listeners are not registered");
}
if (!serv->sv_nrthreads && list_empty(&nn->nfsd_serv->sv_permsocks))
next reply other threads:[~2026-11-04 18:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-04 18:54 gregkh [this message]
2026-11-06 2:38 ` [PATCH 6.18.y 1/3] NFSD: report listener creation failures through extack Sasha Levin
2026-11-06 2:38 ` [PATCH 6.18.y 2/3] SUNRPC: report local rpcbind calls that get no answer Sasha Levin
2026-11-06 2:38 ` [PATCH 6.18.y 3/3] NFSD: stop registering with rpcbind after a failure in listener_set Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026110424-scope-designed-5ca1@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=cel@kernel.org \
--cc=jlayton@kernel.org \
--cc=okorniev@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox