Linux kernel -stable discussions
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Tianchu Chen <flynnnchen@tencent.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.10.y] staging: rtl8723bs: fix protected RX frame validation in decrypt path
Date: Thu,  5 Nov 2026 07:21:25 -0500	[thread overview]
Message-ID: <20261105121915.1233786-1-sashal@kernel.org> (raw)
In-Reply-To: <2026110449-unleveled-simmering-935a@gregkh>

From: Tianchu Chen <flynnnchen@tencent.com>

[ Upstream commit 495cb31c791bdf3f9efef255a9587b05b0526c9d ]

The RX software decrypt path mishandles crafted protected frames from a
malicious AP in two ways:

1) decryptor() never checks that a protected frame is long enough to
hold the 802.11 header plus the per-cipher trailer.  All of
rtw_wep_decrypt(), rtw_tkip_decrypt() and rtw_aes_decrypt() compute

	length = hdr.len - hdrlen - iv_len;

and act on the result, and recvframe_chkmic() similarly computes

	datalen = hdr.len - hdrlen - iv_len - icv_len - 8;

for TKIP (the 8-byte Michael MIC is not accounted for in icv_len).
A frame shorter than hdrlen + iv_len + icv_len (+ 8 for TKIP) underflows
these unsigned subtractions, turning into a ~4 GiB iteration count in
aes_decipher()/arc4_crypt()/rtw_seccalctkipmic() or a ~4 GiB crc32_le()
length, causing out-of-bounds reads/writes of up to ~4 GiB starting from
the rx skb.  Reject such frames in decryptor() before touching the IV;
this covers all three ciphers and the TKIP MIC check, and also keeps the
unconditional iv[3] access within the frame.

2) validate_80211w_mgmt() keeps using the frame - two memcpys through
the stale rx_data pointer and a pkt_len update - before checking
whether decryptor() returned NULL.  On decrypt failure (e.g. a unicast
protected deauth/disassoc/action frame with a bad MIC, which this path
always software-decrypts) the skb has already been freed, so this is a
use-after-free read/write, and the caller's error path frees the frame
a second time, drifting free_recvframe_cnt.  Bail out immediately when
decryptor() fails, freeing the temporary mgmt_DATA buffer first.

Discovered by Atuin - Automated Vulnerability Discovery Engine.

Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Assisted-by: LLM
Cc: stable@vger.kernel.org
Signed-off-by: Tianchu Chen <flynnnchen@tencent.com>
Link: https://patch.msgid.link/8ee3bdd1c45034200cb1aa9a7e9b575b9584643a@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ sashal: Retained the existing DBG_871X() debug message in the relocated decrypt-failure branch. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8723bs/core/rtw_recv.c | 25 ++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/rtl8723bs/core/rtw_recv.c b/drivers/staging/rtl8723bs/core/rtw_recv.c
index 0e6fb03ff85c8..8ed6ded1bef79 100644
--- a/drivers/staging/rtl8723bs/core/rtw_recv.c
+++ b/drivers/staging/rtl8723bs/core/rtw_recv.c
@@ -451,7 +451,21 @@ union recv_frame *decryptor(struct adapter *padapter, union recv_frame *precv_fr
 	RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("prxstat->decrypted =%x prxattrib->encrypt = 0x%03x\n", prxattrib->bdecrypted, prxattrib->encrypt));
 
 	if (prxattrib->encrypt > 0) {
-		u8 *iv = precv_frame->u.hdr.rx_data+prxattrib->hdrlen;
+		u8 *iv;
+		u32 min_len = prxattrib->hdrlen + prxattrib->iv_len + prxattrib->icv_len;
+
+		/* TKIP appends an 8-byte Michael MIC that icv_len doesn't account for */
+		if (prxattrib->encrypt == _TKIP_)
+			min_len += 8;
+
+		/* a protected frame must be long enough to hold the IV and ICV/MIC */
+		if (precv_frame->u.hdr.len < min_len) {
+			rtw_free_recvframe(precv_frame,
+					   &padapter->recvpriv.free_recv_queue);
+			return NULL;
+		}
+
+		iv = precv_frame->u.hdr.rx_data + prxattrib->hdrlen;
 		prxattrib->key_index = (((iv[3])>>6)&0x3);
 
 		if (prxattrib->key_index > WEP_KEYS) {
@@ -1426,6 +1440,11 @@ static sint validate_80211w_mgmt(struct adapter *adapter, union recv_frame *prec
 				goto validate_80211w_fail;
 			}
 			precv_frame = decryptor(adapter, precv_frame);
+			if (!precv_frame) {
+				kfree(mgmt_DATA);
+				DBG_871X("%s mgmt descrypt fail  !!!!!!!!!\n", __func__);
+				goto validate_80211w_fail;
+			}
 			/* save actual management data frame body */
 			memcpy(mgmt_DATA, ptr+pattrib->hdrlen+pattrib->iv_len, data_len);
 			/* overwrite the iv field */
@@ -1433,10 +1452,6 @@ static sint validate_80211w_mgmt(struct adapter *adapter, union recv_frame *prec
 			/* remove the iv and icv length */
 			pattrib->pkt_len = pattrib->pkt_len - pattrib->iv_len - pattrib->icv_len;
 			kfree(mgmt_DATA);
-			if (!precv_frame) {
-				DBG_871X("%s mgmt descrypt fail  !!!!!!!!!\n", __func__);
-				goto validate_80211w_fail;
-			}
 		} else if (IS_MCAST(GetAddr1Ptr(ptr)) &&
 			(subtype == WIFI_DEAUTH || subtype == WIFI_DISASSOC)) {
 			sint BIP_ret = _SUCCESS;
-- 
2.53.0


      reply	other threads:[~2026-11-05 12:21 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-04 14:20 FAILED: patch "[PATCH] staging: rtl8723bs: fix protected RX frame validation in" failed to apply to 5.10-stable tree gregkh
2026-11-05 12:21 ` Sasha Levin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261105121915.1233786-1-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=flynnnchen@tencent.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox