FAILED: patch "[PATCH] arm64: dts: mediatek: mt7986: correct timer frequency" failed to apply to 6.1-stable tree

[Sasha Levin <sashal@kernel.org>]

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 1cf18e4b9815beaf0439c5b57b65b45151c82ad7
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '20261107054114-failed-6.1-1cf18e4b9815@kernel.org' --subject-prefix 'PATCH 6.1.y' 'HEAD^..'

Thanks,
Sasha

------------------ original commit in Linus's tree ------------------

From 1cf18e4b9815beaf0439c5b57b65b45151c82ad7 Mon Sep 17 00:00:00 2001
From: Andrea Pesaresi <andreapesaresi82@gmail.com>
Date: Sat, 29 Aug 2026 17:19:55 +0200
Subject: [PATCH] arm64: dts: mediatek: mt7986: correct timer frequency

The MT7986 architected timer runs at 12,986,200 Hz rather than 13 MHz.
Firmware reports 13 MHz through CNTFRQ_EL0, causing the system clock to
run slow by about 1062 ppm. This exceeds the kernel's 500 ppm NTP
correction limit and leaves clock discipline saturated.

The corrected rate comes from MediaTek's downstream OpenWrt feed, where
it is applied to both MT7986A and MT7986B. Since upstream mt7986b.dtsi
includes mt7986a.dtsi, add it once to the common timer node so the
architected timer driver uses the actual counter rate.

Fixes: 50137c150f5f ("arm64: dts: mediatek: add basic mt7986 support")
Cc: stable@vger.kernel.org
Link: https://github.com/mediatek/mtk-openwrt-feeds/commit/6a4c41c41410cd5042ad10c39da6593ba036283c
Link: https://github.com/openwrt/openwrt/issues/24789
Signed-off-by: Andrea Pesaresi <andreapesaresi82@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 9ebc196107e5a..318639a7c64e9 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -657,6 +657,7 @@ cpu_trip_active_low: active-low {
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
+		clock-frequency = <12986200>;
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-- 
2.53.0