From: Sasha Levin <sashal@kernel.org>
To: tharitt97@gmail.com, benjamin.gaignard@collabora.com,
nicolas.dufresne@collabora.com, hverkuil+cisco@kernel.org
Cc: stable@vger.kernel.org
Subject: FAILED: patch "[PATCH] media: hantro: disable runtime PM before hardware teardown" failed to apply to 6.1-stable tree
Date: Sat, 7 Nov 2026 05:44:09 -0500 [thread overview]
Message-ID: <20261107054409-failed-6.1-8e26d4c20ed2@kernel.org> (raw)
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 8e26d4c20ed218db6c3123480a4a4e2545680566
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '20261107054409-failed-6.1-8e26d4c20ed2@kernel.org' --subject-prefix 'PATCH 6.1.y' 'HEAD^..'
Thanks,
Sasha
------------------ original commit in Linus's tree ------------------
From 8e26d4c20ed218db6c3123480a4a4e2545680566 Mon Sep 17 00:00:00 2001
From: Tharit Tangkijwanichakul <tharitt97@gmail.com>
Date: Wed, 22 Jul 2026 16:08:19 +0000
Subject: [PATCH] media: hantro: disable runtime PM before hardware teardown
Removing the Hantro driver may trigger an SError on RK3588:
SError Interrupt on CPU6, code 0x00000000be000011 -- SError
...
do_serror+0x5c/0x74
el1h_64_error_handler+0x34/0x50
el1h_64_error+0x6c/0x70
regmap_mmio_read32le+0x10/0x20 (P)
_regmap_bus_reg_read+0x6c/0xb4
_regmap_read+0x60/0xdc
regmap_read+0x4c/0x80
rockchip_pd_power+0xe4/0x600
rockchip_pd_power_off+0x1c/0x60
_genpd_power_off+0x98/0x198
genpd_power_off.part.0+0x178/0x288
genpd_runtime_suspend+0x210/0x300
__rpm_callback+0x48/0x1e0
rpm_callback+0x74/0x80
rpm_suspend+0x10c/0x580
rpm_idle+0x134/0x1b8
update_autosuspend+0x30/0xc4
__pm_runtime_use_autosuspend+0x48/0x64
hantro_remove+0x8c/0xa8 [hantro_vpu]
...
hantro_remove() currently asserts the device resets before disabling
runtime PM.
Calling pm_runtime_dont_use_autosuspend() causes an idle device to be
runtime-suspended immediately. At that point the Hantro hardware has
already been torn down, while the generic power-domain genpd code
still performs the power-off sequence. genpd regmap_mmio_read causes panic
subsequently because the reset lines were asserted.
Disable runtime PM before asserting the reset lines so that no runtime-PM
transition can race with hardware teardown.
Apply the same ordering to the probe error paths as well.
Fixes: ea71631b7129 ("media: hantro: add support for reset lines")
Cc: stable@vger.kernel.org
Signed-off-by: Tharit Tangkijwanichakul <tharitt97@gmail.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
---
drivers/media/platform/verisilicon/hantro_drv.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/verisilicon/hantro_drv.c b/drivers/media/platform/verisilicon/hantro_drv.c
index 7cffbde8ce6e6..26e5d5547466e 100644
--- a/drivers/media/platform/verisilicon/hantro_drv.c
+++ b/drivers/media/platform/verisilicon/hantro_drv.c
@@ -1210,7 +1210,7 @@ static int hantro_probe(struct platform_device *pdev)
ret = clk_bulk_prepare(vpu->variant->num_clocks, vpu->clocks);
if (ret) {
dev_err(&pdev->dev, "Failed to prepare clocks\n");
- goto err_rst_assert;
+ goto err_pm_disable_assert_reset;
}
ret = v4l2_device_register(&pdev->dev, &vpu->v4l2_dev);
@@ -1264,8 +1264,11 @@ static int hantro_probe(struct platform_device *pdev)
v4l2_device_unregister(&vpu->v4l2_dev);
err_clk_unprepare:
clk_bulk_unprepare(vpu->variant->num_clocks, vpu->clocks);
-err_rst_assert:
+err_pm_disable_assert_reset:
+ pm_runtime_dont_use_autosuspend(vpu->dev);
+ pm_runtime_disable(vpu->dev);
reset_control_assert(vpu->resets);
+ return ret;
err_pm_disable:
pm_runtime_dont_use_autosuspend(vpu->dev);
pm_runtime_disable(vpu->dev);
@@ -1285,9 +1288,9 @@ static void hantro_remove(struct platform_device *pdev)
v4l2_m2m_put(vpu->m2m_dev);
v4l2_device_unregister(&vpu->v4l2_dev);
clk_bulk_unprepare(vpu->variant->num_clocks, vpu->clocks);
- reset_control_assert(vpu->resets);
pm_runtime_dont_use_autosuspend(vpu->dev);
pm_runtime_disable(vpu->dev);
+ reset_control_assert(vpu->resets);
}
static int hantro_runtime_resume(struct device *dev)
--
2.53.0
next reply other threads:[~2026-11-07 10:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-07 10:44 Sasha Levin [this message]
2026-11-10 12:39 ` [PATCH 6.1.y 1/2] media: hantro_drv: Convert to platform remove callback returning void Sasha Levin
2026-11-10 12:39 ` [PATCH 6.1.y 2/2] media: hantro: disable runtime PM before hardware teardown Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261107054409-failed-6.1-8e26d4c20ed2@kernel.org \
--to=sashal@kernel.org \
--cc=benjamin.gaignard@collabora.com \
--cc=hverkuil+cisco@kernel.org \
--cc=nicolas.dufresne@collabora.com \
--cc=stable@vger.kernel.org \
--cc=tharitt97@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox