Linux kernel -stable discussions
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: j@jannau.net, neal@gompa.dev, arend.vanspriel@broadcom.com,
	johannes.berg@intel.com
Cc: stable@vger.kernel.org
Subject: FAILED: patch "[PATCH] wifi: brcmfmac: cfg80211: Report port_authorized for 4-way HS offload" failed to apply to 5.15-stable tree
Date: Sat,  7 Nov 2026 06:02:24 -0500	[thread overview]
Message-ID: <20261107060223-failed-5.15-6fff9de5c5b4@kernel.org> (raw)

The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 6fff9de5c5b425817588eeed42bd56d665751c13
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '20261107060223-failed-5.15-6fff9de5c5b4@kernel.org' --subject-prefix 'PATCH 5.15.y' 'HEAD^..'

Thanks,
Sasha

------------------ original commit in Linus's tree ------------------

From 6fff9de5c5b425817588eeed42bd56d665751c13 Mon Sep 17 00:00:00 2001
From: Janne Grunau <j@jannau.net>
Date: Tue, 15 Sep 2026 21:17:38 +0200
Subject: [PATCH] wifi: brcmfmac: cfg80211: Report port_authorized for 4-way HS
 offload

Since commit 416386060 ("Mark authorization completed on driver
indication during 4-way HS offload") [0] wpa_supplicant expects
NL80211_CMD_PORT_AUTHORIZED to complete the authentication when the
driver supports 4-way handshake offload.
This was apparently never tested with the upstream brcmfmac driver as it
does not report this. This broke authentication on Apple silicon devices
(BRCM4378, BRMC4387, BRMC4388) and other devices when wpa_supplicant
2.11 was released [1]. This was initially dealt with by reverting the
commit in Fedora [2] and other Linux distributions.
Instead of carrying the revert over to wpa_supplicant 2.12 add the
expected NL80211_CMD_PORT_AUTHORIZED when the connection is established.

The "Fixes:" tag is not fully accurate as this has only became an issue
after userspace changes years after the change. Since the change is
expected to be required in all active stable branches for wpa_supplicant
2.11 / 2.12 compatibility it is helpful even though
BRCMF_PROFILE_FWSUP_SAE did not exists then.

Link: https://github.com/zephyrproject-rtos/hostap/commit/41638606054a09867fe3f9a2b5523aa4678cbfa5 [0]
Link: https://lists.infradead.org/pipermail/hostap/2024-August/042893.html [1]
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2302577 [2]
Link: https://lore.kernel.org/linux-wireless/20260911065656.1269623-5-Jason.Huang2@infineon.com/ [3]
Cc: stable@vger.kernel.org
Fixes: b8a64f0e96c2 ("brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSK")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260915-brcmfmac-4way-handshake-offload-authenticated-event-v2-1-fbb9cc7ac177@jannau.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 .../broadcom/brcm80211/brcmfmac/cfg80211.c    | 20 +++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index fc08c5b2d572f..e32b46b7cbe25 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -6588,6 +6588,21 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg,
 	return err;
 }
 
+static bool
+brcmf_fwsup_is_authorized(struct brcmf_cfg80211_profile *profile,
+			  struct cfg80211_connect_resp_params *conn_params)
+{
+	if ((profile->use_fwsup == BRCMF_PROFILE_FWSUP_1X ||
+	     profile->use_fwsup == BRCMF_PROFILE_FWSUP_ROAM) &&
+	    brcmf_has_pmkid(conn_params->req_ie, conn_params->req_ie_len))
+		return true;
+	if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_SAE ||
+	    profile->use_fwsup == BRCMF_PROFILE_FWSUP_PSK)
+		return true;
+
+	return false;
+}
+
 static s32
 brcmf_bss_connect_done(struct brcmf_cfg80211_info *cfg,
 		       struct net_device *ndev, const struct brcmf_event_msg *e,
@@ -6625,10 +6640,7 @@ brcmf_bss_connect_done(struct brcmf_cfg80211_info *cfg,
 		conn_params.resp_ie = conn_info->resp_ie;
 		conn_params.resp_ie_len = conn_info->resp_ie_len;
 		authorized = completed &&
-			     (profile->use_fwsup == BRCMF_PROFILE_FWSUP_1X ||
-			      profile->use_fwsup == BRCMF_PROFILE_FWSUP_ROAM) &&
-			     brcmf_has_pmkid(conn_params.req_ie,
-					     conn_params.req_ie_len);
+			     brcmf_fwsup_is_authorized(profile, &conn_params);
 		cfg80211_connect_done(ndev, &conn_params, GFP_KERNEL);
 		if (authorized)
 			cfg80211_port_authorized(ndev, profile->bssid, NULL, 0,
-- 
2.53.0





             reply	other threads:[~2026-11-07 11:02 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-07 11:02 Sasha Levin [this message]
2026-11-10 20:06 ` [PATCH 5.15.y] wifi: brcmfmac: cfg80211: Report port_authorized for 4-way HS offload Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261107060223-failed-5.15-6fff9de5c5b4@kernel.org \
    --to=sashal@kernel.org \
    --cc=arend.vanspriel@broadcom.com \
    --cc=j@jannau.net \
    --cc=johannes.berg@intel.com \
    --cc=neal@gompa.dev \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox