From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.remote-ip=100.103.45.18 ARC-Seal: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=none; t=1794063879; b=iqLeFyDvKuUuxJEkwSBTUlxwe/jznqYdkFDKwVCpoqZ4vb6fuV2md9hFVcK6eUnEgdhJ ISp3N+rFOm/diy5g71N71cXJWZ7IBKiSfYbMHwqBK5lP7HDochcF1pQPT9fi4amyH08+c t6grbHJwk+FPc/PwpsrChPZlHJR2MgQUhzfElHOvEiBjn9rQbvJb4DmRstnbmvO5It4ld NKTVC8LXzE6FNsWs5P78yvW5uiQJdr7/m6zS9GQZepIMUcZ5hwlq0KnPjxIoA1qSryeTu zpVwHIKr74jG+aGVHrHBcbz20v24SOV+cpGIAJO5ROa/mRmrgf2jfJrcqnegMJdiZjw== ARC-Message-Signature: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1794063879; h=Received:DKIM-Signature:From:To:Cc:Subject:Date:Message-ID:X-Mailer: In-Reply-To:References:User-Agent:X-stable:X-Patchwork-Hint: MIME-Version:Content-Transfer-Encoding; bh=3qDCTQV1mOZVqYmYtf9eEvJgXUHiH0jcMlHHMRnqRpo=; b=WHYhAMQWD8vNnkh0qF8HRWsJ+zgfiKVYwQRELQ+eng9Kf7i2mwvrPKCZ1gCwHHqUwDnS 5AoCCH8qbmtzLapDzd+1G+YC++aXq6REZp3KBqHo3G1US2kTWgZt/LrhjvHv8wYsK0k1G lLPiJKgjnHwHG62IVD9ikgLpTq/rYqO4zRgNHMNzYK+eoH55Bcz/6tCiJCbg2UIsgI4lU adgZAV4NkAPyq5OR6VQQ+hEWLaurdTHYSssImDjE94/1/FHdAXseq8orNLb+PQ5yK2b6w eGKlrqrkRBX/Qq8CsSFfoeNWm7K19vlWPTWTp4IHMXdUDLbP8r4Qm0Abi2HnYquGeaw== ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass header.d=linuxfoundation.org header.i=@linuxfoundation.org header.a=rsa-sha256 header.s=korg header.b=dIzPbszK; arc=none smtp.remote-ip=100.103.45.18 Received: from smtp.kernel.org (quasi.space.kernel.org [100.103.45.18]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (prime256v1)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 41651606A32F; Sat, 7 Nov 2026 15:04:39 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linuxfoundation.org header.i=@linuxfoundation.org header.a=rsa-sha256 header.s=korg header.b=dIzPbszK Received: by smtp.kernel.org (Postfix) with ESMTPSA id E60691F0089F; Sat, 7 Nov 2026 15:04:38 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linuxfoundation.org; s=korg; t=1794063879; bh=3qDCTQV1mOZVqYmYtf9eEvJgXUHiH0jcMlHHMRnqRpo=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=dIzPbszKzFzo4kTgxaF+ZUYRRfCVbTXa4f5sNh0N4LO1znBkIT4YBwd7GE05GeWlm RVilO7k4AuWaDN/tF/PRcuWJQ/2zLBTL2CECFdWyERdp5nIWawYE2hlOyC3WY1mqc+ jaV4VwPYO1pTQ2nSC08g/BaZqXri/+Z+n61wXcG4= From: Greg Kroah-Hartman To: stable@vger.kernel.org Cc: Greg Kroah-Hartman , patches@lists.linux.dev, Johan Hovold , Caleb Connolly , Bjorn Andersson , Abel Vesa , Abel Vesa , Sasha Levin Subject: [PATCH 7.3 0046/1257] soc: qcom: pmic_glink: Fix device access from worker during suspend Date: Sat, 7 Nov 2026 08:39:02 -0500 Message-ID: <20261107134940.681657034@linuxfoundation.org> X-Mailer: git-send-email 2.56.0 In-Reply-To: <20261107134939.434104957@linuxfoundation.org> References: <20261107134939.434104957@linuxfoundation.org> User-Agent: quilt/0.69 X-stable: review X-Patchwork-Hint: ignore X-Mailing-List: stable@vger.kernel.org List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 Content-Transfer-Encoding: 8bit 7.3-stable review patch. If anyone has any objections, please let me know. ------------------ From: Abel Vesa [ Upstream commit 7d0767c5cd878707fd6711023731549c83563840 ] For historical reasons, the GLINK smem interrupt is registered with IRRQF_NO_SUSPEND flag set, which is the underlying problem here, since the incoming messages can be delivered during late suspend and early resume. In this specific case, the pmic_glink_altmode_worker() currently gets scheduled on the system_wq which can be scheduled to run while devices are still suspended. This proves to be a problem when a Type-C retimer, switch or mux that is controlled over a bus like I2C, because the I2C controller is suspended. This has been proven to be the case on the X Elite boards where such retimers (ParadeTech PS8830) are used in order to handle Type-C orientation and altmode configuration. The following warning is thrown: [ 35.134876] i2c i2c-4: Transfer while suspended [ 35.143865] WARNING: CPU: 0 PID: 99 at drivers/i2c/i2c-core.h:56 __i2c_transfer+0xb4/0x57c [i2c_core] [ 35.352879] Workqueue: events pmic_glink_altmode_worker [pmic_glink_altmode] [ 35.360179] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 35.455242] Call trace: [ 35.457826] __i2c_transfer+0xb4/0x57c [i2c_core] (P) [ 35.463086] i2c_transfer+0x98/0xf0 [i2c_core] [ 35.467713] i2c_transfer_buffer_flags+0x54/0x88 [i2c_core] [ 35.473502] regmap_i2c_write+0x20/0x48 [regmap_i2c] [ 35.478659] _regmap_raw_write_impl+0x780/0x944 [ 35.483401] _regmap_bus_raw_write+0x60/0x7c [ 35.487848] _regmap_write+0x134/0x184 [ 35.491773] regmap_write+0x54/0x78 [ 35.495418] ps883x_set+0x58/0xec [ps883x] [ 35.499688] ps883x_sw_set+0x60/0x84 [ps883x] [ 35.504223] typec_switch_set+0x48/0x74 [typec] [ 35.508952] pmic_glink_altmode_worker+0x44/0x1fc [pmic_glink_altmode] [ 35.515712] process_scheduled_works+0x1a0/0x2d0 [ 35.520525] worker_thread+0x2a8/0x3c8 [ 35.524449] kthread+0xfc/0x184 [ 35.527749] ret_from_fork+0x10/0x20 The proper solution here should be to not deliver these kind of messages during system suspend at all, or at least make it configurable per glink client. But simply dropping the IRQF_NO_SUSPEND flag entirely will break other clients. The final shape of the rework of the pmic glink driver in order to fulfill both the filtering of the messages that need to be able to wake-up the system and the queueing of these messages until the system has properly resumed is still being discussed and it is planned as a future effort. Meanwhile, the stop-gap fix here is to schedule the pmic glink altmode worker on the system_freezable_wq instead of the system_wq. This will result in the altmode worker not being scheduled to run until the devices are resumed first, which will give the controllers like I2C a chance to resume before the transfer is requested. Reported-by: Johan Hovold Closes: https://lore.kernel.org/lkml/Z1CCVjEZMQ6hJ-wK@hovoldconsulting.com/ Fixes: 080b4e24852b ("soc: qcom: pmic_glink: Introduce altmode support") Cc: stable@vger.kernel.org # 6.3 Reviewed-by: Caleb Connolly Reviewed-by: Bjorn Andersson Signed-off-by: Abel Vesa Signed-off-by: Abel Vesa Link: https://lore.kernel.org/r/20260819-b4-soc-qcom-pmic-glink-fix-device-access-on-worker-while-suspended-v3-1-169b00e0d9d4@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin --- drivers/soc/qcom/pmic_glink_altmode.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/soc/qcom/pmic_glink_altmode.c b/drivers/soc/qcom/pmic_glink_altmode.c index 13c434f8d03a6..465e5d2316a04 100644 --- a/drivers/soc/qcom/pmic_glink_altmode.c +++ b/drivers/soc/qcom/pmic_glink_altmode.c @@ -451,7 +451,7 @@ static void pmic_glink_altmode_sc8180xp_notify(struct pmic_glink_altmode *altmod alt_port->mode = mode; alt_port->hpd_state = hpd_state; alt_port->hpd_irq = hpd_irq; - schedule_work(&alt_port->work); + queue_work(system_freezable_wq, &alt_port->work); } #define SC8280XP_DPAM_MASK 0x3f @@ -502,7 +502,7 @@ static void pmic_glink_altmode_sc8280xp_notify(struct pmic_glink_altmode *altmod alt_port->tbt_data = *tbt; } - schedule_work(&alt_port->work); + queue_work(system_freezable_wq, &alt_port->work); } static void pmic_glink_altmode_callback(const void *data, size_t len, void *priv) -- 2.53.0