FAILED: patch "[PATCH] scsi: ufs: core: Change the error check sequence for auto hibern8" failed to apply to 6.18-stable tree

[Sasha Levin <sashal@kernel.org>]

The patch below does not apply to the 6.18-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.18.y
git checkout FETCH_HEAD
git cherry-pick -x 6b2ff2b3eafa381db9b4c8a6ed98b353b2a09f39
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '20261109200218-failed-6.18-6b2ff2b3eafa@kernel.org' --subject-prefix 'PATCH 6.18.y' 'HEAD^..'

Thanks,
Sasha

------------------ original commit in Linus's tree ------------------

From 6b2ff2b3eafa381db9b4c8a6ed98b353b2a09f39 Mon Sep 17 00:00:00 2001
From: HOYOUNG SEO <hy50.seo@samsung.com>
Date: Tue, 27 Oct 2026 20:03:57 +0900
Subject: [PATCH] scsi: ufs: core: Change the error check sequence for auto
 hibern8

Auto-hibern8 enter and exit are performed by the host controller without a
UIC command, and the auto-hibern8 idle timer only runs while no UIC command
is outstanding. An auto-hibern8 error (IS.UHES or IS.UHXS) is therefore
usually reported while hba->active_uic_cmd is NULL.

Since commit fcd8b0450a9a ("scsi: ufs: core: Make ufshcd_uic_cmd_compl()
easier to analyze"), ufshcd_uic_cmd_compl() returns early when
hba->active_uic_cmd is NULL, before ufshcd_is_auto_hibern8_error() is
called. Such auto-hibern8 errors are no longer recorded in hba->errors, so
ufshcd_check_errors() is not called for them and the error handler is not
scheduled.

Check for auto-hibern8 errors before checking for an active UIC command, as
was done before that commit, but keep returning early when there is no
active UIC command so that a NULL cmd is never dereferenced. Only report
the missing UIC command if no auto-hibern8 error was found.

Fixes: fcd8b0450a9a ("scsi: ufs: core: Make ufshcd_uic_cmd_compl() easier to analyze")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: HOYOUNG SEO <hy50.seo@samsung.com>
Reviewed-by: Stanley Jhu <stanleyjhu@google.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20261027110357.3649301-1-hy50.seo@samsung.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
---
 drivers/ufs/core/ufshcd.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index ee643830a57a2..fd52deb72d21c 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -5931,18 +5931,26 @@ static irqreturn_t ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
 {
 	irqreturn_t retval = IRQ_NONE;
 	struct uic_command *cmd;
+	bool ah8_err;
 
 	guard(spinlock_irqsave)(&hba->host->host_lock);
+
+	/*
+	 * Auto-hibern8 is performed without a UIC command, so check for
+	 * auto-hibern8 errors before checking for an active UIC command.
+	 */
+	ah8_err = ufshcd_is_auto_hibern8_error(hba, intr_status);
+	if (ah8_err)
+		hba->errors |= (UFSHCD_UIC_HIBERN8_MASK & intr_status);
+
 	cmd = hba->active_uic_cmd;
 	if (!cmd) {
-		dev_err(hba->dev,
-			"No active UIC command. Maybe a timeout occurred?\n");
+		if (!ah8_err)
+			dev_err(hba->dev,
+				"No active UIC command. Maybe a timeout occurred?\n");
 		return retval;
 	}
 
-	if (ufshcd_is_auto_hibern8_error(hba, intr_status))
-		hba->errors |= (UFSHCD_UIC_HIBERN8_MASK & intr_status);
-
 	if (intr_status & UIC_COMMAND_COMPL) {
 		/*
 		 * Store the UIC command result in the lowest byte of
-- 
2.53.0