From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Balakrishnan Sambath <balakrishnan.s@microchip.com>,
Eugen Hristev <ehristev@kernel.org>,
Hans Verkuil <hverkuil+cisco@kernel.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.1.y] media: microchip-isc: synchronize the IRQ before disabling clocks on stop
Date: Mon, 9 Nov 2026 23:37:18 -0500 [thread overview]
Message-ID: <20261110043702.334033-1-sashal@kernel.org> (raw)
In-Reply-To: <20261107054124-failed-6.1-19fa5407da5e@kernel.org>
From: Balakrishnan Sambath <balakrishnan.s@microchip.com>
[ Upstream commit 19fa5407da5ef3e605cacfcd90f70d8b2c121cd7 ]
isc_stop_streaming() masks the DMA interrupt and then drops the runtime
PM reference, which disables the ISC clocks. microchip_isc_interrupt()
may still be executing on another CPU at that point; it reads ISC_INTSR
over regmap, and touching the unclocked registers triggers an external
abort.
Store the IRQ number at probe and call synchronize_irq() after masking
the interrupt, before dropping the PM reference.
Fixes: 106267444f12 ("[media] atmel-isc: add the Image Sensor Controller code")
Cc: stable@vger.kernel.org
Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
Reviewed-by: Eugen Hristev <ehristev@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[ sashal: adjusted context for existing Atmel driver names, including isc_interrupt ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/atmel/atmel-isc-base.c | 3 +++
drivers/media/platform/atmel/atmel-isc.h | 1 +
drivers/media/platform/atmel/atmel-sama5d2-isc.c | 2 ++
drivers/media/platform/atmel/atmel-sama7g5-isc.c | 2 ++
4 files changed, 8 insertions(+)
diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
index 9e91e4d948a24..36864f0b36c04 100644
--- a/drivers/media/platform/atmel/atmel-isc-base.c
+++ b/drivers/media/platform/atmel/atmel-isc-base.c
@@ -422,6 +422,9 @@ static void isc_stop_streaming(struct vb2_queue *vq)
/* Disable DMA interrupt */
regmap_write(isc->regmap, ISC_INTDIS, ISC_INT_DDONE);
+ /* let a running IRQ handler finish before the clock is disabled */
+ synchronize_irq(isc->irq);
+
pm_runtime_put_sync(isc->dev);
/* Disable stream on the sub device */
diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
index ff60ba020cb99..7d2e7825cfb00 100644
--- a/drivers/media/platform/atmel/atmel-isc.h
+++ b/drivers/media/platform/atmel/atmel-isc.h
@@ -269,6 +269,7 @@ struct isc_device {
u32 dcfg;
struct device *dev;
+ int irq;
struct v4l2_device v4l2_dev;
struct video_device video_dev;
diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
index ea3e8b86a7f31..5dec061a6e733 100644
--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
@@ -421,6 +421,8 @@ static int atmel_isc_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
+ isc->irq = irq;
+
ret = devm_request_irq(dev, irq, isc_interrupt, 0,
"atmel-sama5d2-isc", isc);
if (ret < 0) {
diff --git a/drivers/media/platform/atmel/atmel-sama7g5-isc.c b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
index 4bc2f5c7f2f7d..e3513e0617ed6 100644
--- a/drivers/media/platform/atmel/atmel-sama7g5-isc.c
+++ b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
@@ -410,6 +410,8 @@ static int microchip_xisc_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
+ isc->irq = irq;
+
ret = devm_request_irq(dev, irq, isc_interrupt, 0,
"microchip-sama7g5-xisc", isc);
if (ret < 0) {
--
2.53.0
prev parent reply other threads:[~2026-11-10 4:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-07 10:41 FAILED: patch "[PATCH] media: microchip-isc: synchronize the IRQ before disabling clocks on stop" failed to apply to 6.1-stable tree Sasha Levin
2026-11-10 4:37 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261110043702.334033-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=balakrishnan.s@microchip.com \
--cc=ehristev@kernel.org \
--cc=hverkuil+cisco@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox