From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Casey Connolly <casey.connolly@linaro.org>,
Sebastian Reichel <sebastian.reichel@collabora.com>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.12.y 1/2] power: supply: pmi8998_charger: rename to qcom_smbx
Date: Tue, 10 Nov 2026 07:25:48 -0500 [thread overview]
Message-ID: <20261110122522.1154709-1-sashal@kernel.org> (raw)
In-Reply-To: <20261107051650-failed-6.12-a2d7dc538da2@kernel.org>
From: Casey Connolly <casey.connolly@linaro.org>
[ Upstream commit 5ec53bcc7fce6801977a0c125fb726d7b0e9102c ]
Prepare to add smb5 support by making variables and the file name more
generic. Also take the opportunity to remove the "_charger" suffix since
smb2 always refers to a charger.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250619-smb2-smb5-support-v1-4-ac5dec51b6e1@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Stable-dep-of: a2d7dc538da2 ("power: supply: qcom_smbx: validate battery float voltage")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/power/supply/Makefile | 2 +-
.../{qcom_pmi8998_charger.c => qcom_smbx.c} | 148 +++++++++---------
2 files changed, 75 insertions(+), 75 deletions(-)
rename drivers/power/supply/{qcom_pmi8998_charger.c => qcom_smbx.c} (88%)
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 8dcb415453171..6673860ff26c1 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -115,5 +115,5 @@ obj-$(CONFIG_BATTERY_ACER_A500) += acer_a500_battery.o
obj-$(CONFIG_BATTERY_SURFACE) += surface_battery.o
obj-$(CONFIG_CHARGER_SURFACE) += surface_charger.o
obj-$(CONFIG_BATTERY_UG3105) += ug3105_battery.o
-obj-$(CONFIG_CHARGER_QCOM_SMB2) += qcom_pmi8998_charger.o
+obj-$(CONFIG_CHARGER_QCOM_SMB2) += qcom_smbx.o
obj-$(CONFIG_FUEL_GAUGE_MM8013) += mm8013.o
diff --git a/drivers/power/supply/qcom_pmi8998_charger.c b/drivers/power/supply/qcom_smbx.c
similarity index 88%
rename from drivers/power/supply/qcom_pmi8998_charger.c
rename to drivers/power/supply/qcom_smbx.c
index d4c9f85654da3..c5ac09469650a 100644
--- a/drivers/power/supply/qcom_pmi8998_charger.c
+++ b/drivers/power/supply/qcom_smbx.c
@@ -364,17 +364,17 @@ enum charger_status {
DISABLE_CHARGE,
};
-struct smb2_register {
+struct smb_init_register {
u16 addr;
u8 mask;
u8 val;
};
/**
- * struct smb2_chip - smb2 chip structure
+ * struct smb_chip - smb chip structure
* @dev: Device reference for power_supply
* @name: The platform device name
- * @base: Base address for smb2 registers
+ * @base: Base address for smb registers
* @regmap: Register map
* @batt_info: Battery data from DT
* @status_change_work: Worker to handle plug/unplug events
@@ -384,7 +384,7 @@ struct smb2_register {
* @usb_in_v_chan: USB_IN voltage measurement channel
* @chg_psy: Charger power supply instance
*/
-struct smb2_chip {
+struct smb_chip {
struct device *dev;
const char *name;
unsigned int base;
@@ -401,7 +401,7 @@ struct smb2_chip {
struct power_supply *chg_psy;
};
-static enum power_supply_property smb2_properties[] = {
+static enum power_supply_property smb_properties[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_CURRENT_MAX,
@@ -413,7 +413,7 @@ static enum power_supply_property smb2_properties[] = {
POWER_SUPPLY_PROP_USB_TYPE,
};
-static int smb2_get_prop_usb_online(struct smb2_chip *chip, int *val)
+static int smb_get_prop_usb_online(struct smb_chip *chip, int *val)
{
unsigned int stat;
int rc;
@@ -433,13 +433,13 @@ static int smb2_get_prop_usb_online(struct smb2_chip *chip, int *val)
* Qualcomm "automatic power source detection" aka APSD
* tells us what type of charger we're connected to.
*/
-static int smb2_apsd_get_charger_type(struct smb2_chip *chip, int *val)
+static int smb_apsd_get_charger_type(struct smb_chip *chip, int *val)
{
unsigned int apsd_stat, stat;
int usb_online = 0;
int rc;
- rc = smb2_get_prop_usb_online(chip, &usb_online);
+ rc = smb_get_prop_usb_online(chip, &usb_online);
if (!usb_online) {
*val = POWER_SUPPLY_USB_TYPE_UNKNOWN;
return rc;
@@ -473,13 +473,13 @@ static int smb2_apsd_get_charger_type(struct smb2_chip *chip, int *val)
return 0;
}
-static int smb2_get_prop_status(struct smb2_chip *chip, int *val)
+static int smb_get_prop_status(struct smb_chip *chip, int *val)
{
unsigned char stat[2];
int usb_online = 0;
int rc;
- rc = smb2_get_prop_usb_online(chip, &usb_online);
+ rc = smb_get_prop_usb_online(chip, &usb_online);
if (!usb_online) {
*val = POWER_SUPPLY_STATUS_DISCHARGING;
return rc;
@@ -521,7 +521,7 @@ static int smb2_get_prop_status(struct smb2_chip *chip, int *val)
}
}
-static inline int smb2_get_current_limit(struct smb2_chip *chip,
+static inline int smb_get_current_limit(struct smb_chip *chip,
unsigned int *val)
{
int rc = regmap_read(chip->regmap, chip->base + ICL_STATUS, val);
@@ -531,7 +531,7 @@ static inline int smb2_get_current_limit(struct smb2_chip *chip,
return rc;
}
-static int smb2_set_current_limit(struct smb2_chip *chip, unsigned int val)
+static int smb_set_current_limit(struct smb_chip *chip, unsigned int val)
{
unsigned char val_raw;
@@ -546,22 +546,22 @@ static int smb2_set_current_limit(struct smb2_chip *chip, unsigned int val)
val_raw);
}
-static void smb2_status_change_work(struct work_struct *work)
+static void smb_status_change_work(struct work_struct *work)
{
unsigned int charger_type, current_ua;
int usb_online = 0;
int count, rc;
- struct smb2_chip *chip;
+ struct smb_chip *chip;
- chip = container_of(work, struct smb2_chip, status_change_work.work);
+ chip = container_of(work, struct smb_chip, status_change_work.work);
- smb2_get_prop_usb_online(chip, &usb_online);
+ smb_get_prop_usb_online(chip, &usb_online);
if (!usb_online)
return;
for (count = 0; count < 3; count++) {
dev_dbg(chip->dev, "get charger type retry %d\n", count);
- rc = smb2_apsd_get_charger_type(chip, &charger_type);
+ rc = smb_apsd_get_charger_type(chip, &charger_type);
if (rc != -EAGAIN)
break;
msleep(100);
@@ -594,11 +594,11 @@ static void smb2_status_change_work(struct work_struct *work)
break;
}
- smb2_set_current_limit(chip, current_ua);
+ smb_set_current_limit(chip, current_ua);
power_supply_changed(chip->chg_psy);
}
-static int smb2_get_iio_chan(struct smb2_chip *chip, struct iio_channel *chan,
+static int smb_get_iio_chan(struct smb_chip *chip, struct iio_channel *chan,
int *val)
{
int rc;
@@ -619,7 +619,7 @@ static int smb2_get_iio_chan(struct smb2_chip *chip, struct iio_channel *chan,
return iio_read_channel_processed(chan, val);
}
-static int smb2_get_prop_health(struct smb2_chip *chip, int *val)
+static int smb_get_prop_health(struct smb_chip *chip, int *val)
{
int rc;
unsigned int stat;
@@ -647,11 +647,11 @@ static int smb2_get_prop_health(struct smb2_chip *chip, int *val)
return 0;
}
-static int smb2_get_property(struct power_supply *psy,
+static int smb_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
- struct smb2_chip *chip = power_supply_get_drvdata(psy);
+ struct smb_chip *chip = power_supply_get_drvdata(psy);
switch (psp) {
case POWER_SUPPLY_PROP_MANUFACTURER:
@@ -661,43 +661,43 @@ static int smb2_get_property(struct power_supply *psy,
val->strval = chip->name;
return 0;
case POWER_SUPPLY_PROP_CURRENT_MAX:
- return smb2_get_current_limit(chip, &val->intval);
+ return smb_get_current_limit(chip, &val->intval);
case POWER_SUPPLY_PROP_CURRENT_NOW:
- return smb2_get_iio_chan(chip, chip->usb_in_i_chan,
+ return smb_get_iio_chan(chip, chip->usb_in_i_chan,
&val->intval);
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- return smb2_get_iio_chan(chip, chip->usb_in_v_chan,
+ return smb_get_iio_chan(chip, chip->usb_in_v_chan,
&val->intval);
case POWER_SUPPLY_PROP_ONLINE:
- return smb2_get_prop_usb_online(chip, &val->intval);
+ return smb_get_prop_usb_online(chip, &val->intval);
case POWER_SUPPLY_PROP_STATUS:
- return smb2_get_prop_status(chip, &val->intval);
+ return smb_get_prop_status(chip, &val->intval);
case POWER_SUPPLY_PROP_HEALTH:
- return smb2_get_prop_health(chip, &val->intval);
+ return smb_get_prop_health(chip, &val->intval);
case POWER_SUPPLY_PROP_USB_TYPE:
- return smb2_apsd_get_charger_type(chip, &val->intval);
+ return smb_apsd_get_charger_type(chip, &val->intval);
default:
dev_err(chip->dev, "invalid property: %d\n", psp);
return -EINVAL;
}
}
-static int smb2_set_property(struct power_supply *psy,
+static int smb_set_property(struct power_supply *psy,
enum power_supply_property psp,
const union power_supply_propval *val)
{
- struct smb2_chip *chip = power_supply_get_drvdata(psy);
+ struct smb_chip *chip = power_supply_get_drvdata(psy);
switch (psp) {
case POWER_SUPPLY_PROP_CURRENT_MAX:
- return smb2_set_current_limit(chip, val->intval);
+ return smb_set_current_limit(chip, val->intval);
default:
dev_err(chip->dev, "No setter for property: %d\n", psp);
return -EINVAL;
}
}
-static int smb2_property_is_writable(struct power_supply *psy,
+static int smb_property_is_writable(struct power_supply *psy,
enum power_supply_property psp)
{
switch (psp) {
@@ -708,9 +708,9 @@ static int smb2_property_is_writable(struct power_supply *psy,
}
}
-static irqreturn_t smb2_handle_batt_overvoltage(int irq, void *data)
+static irqreturn_t smb_handle_batt_overvoltage(int irq, void *data)
{
- struct smb2_chip *chip = data;
+ struct smb_chip *chip = data;
unsigned int status;
int rc;
@@ -731,9 +731,9 @@ static irqreturn_t smb2_handle_batt_overvoltage(int irq, void *data)
return IRQ_HANDLED;
}
-static irqreturn_t smb2_handle_usb_plugin(int irq, void *data)
+static irqreturn_t smb_handle_usb_plugin(int irq, void *data)
{
- struct smb2_chip *chip = data;
+ struct smb_chip *chip = data;
power_supply_changed(chip->chg_psy);
@@ -743,18 +743,18 @@ static irqreturn_t smb2_handle_usb_plugin(int irq, void *data)
return IRQ_HANDLED;
}
-static irqreturn_t smb2_handle_usb_icl_change(int irq, void *data)
+static irqreturn_t smb_handle_usb_icl_change(int irq, void *data)
{
- struct smb2_chip *chip = data;
+ struct smb_chip *chip = data;
power_supply_changed(chip->chg_psy);
return IRQ_HANDLED;
}
-static irqreturn_t smb2_handle_wdog_bark(int irq, void *data)
+static irqreturn_t smb_handle_wdog_bark(int irq, void *data)
{
- struct smb2_chip *chip = data;
+ struct smb_chip *chip = data;
int rc;
power_supply_changed(chip->chg_psy);
@@ -767,22 +767,22 @@ static irqreturn_t smb2_handle_wdog_bark(int irq, void *data)
return IRQ_HANDLED;
}
-static const struct power_supply_desc smb2_psy_desc = {
+static const struct power_supply_desc smb_psy_desc = {
.name = "pmi8998_charger",
.type = POWER_SUPPLY_TYPE_USB,
.usb_types = BIT(POWER_SUPPLY_USB_TYPE_SDP) |
BIT(POWER_SUPPLY_USB_TYPE_CDP) |
BIT(POWER_SUPPLY_USB_TYPE_DCP) |
BIT(POWER_SUPPLY_USB_TYPE_UNKNOWN),
- .properties = smb2_properties,
- .num_properties = ARRAY_SIZE(smb2_properties),
- .get_property = smb2_get_property,
- .set_property = smb2_set_property,
- .property_is_writeable = smb2_property_is_writable,
+ .properties = smb_properties,
+ .num_properties = ARRAY_SIZE(smb_properties),
+ .get_property = smb_get_property,
+ .set_property = smb_set_property,
+ .property_is_writeable = smb_property_is_writable,
};
/* Init sequence derived from vendor downstream driver */
-static const struct smb2_register smb2_init_seq[] = {
+static const struct smb_init_register smb_init_seq[] = {
{ .addr = AICL_RERUN_TIME_CFG, .mask = AICL_RERUN_TIME_MASK, .val = 0 },
/*
* By default configure us as an upstream facing port
@@ -884,17 +884,17 @@ static const struct smb2_register smb2_init_seq[] = {
.val = 1000000 / CURRENT_SCALE_FACTOR },
};
-static int smb2_init_hw(struct smb2_chip *chip)
+static int smb_init_hw(struct smb_chip *chip)
{
int rc, i;
- for (i = 0; i < ARRAY_SIZE(smb2_init_seq); i++) {
+ for (i = 0; i < ARRAY_SIZE(smb_init_seq); i++) {
dev_dbg(chip->dev, "%d: Writing 0x%02x to 0x%02x\n", i,
- smb2_init_seq[i].val, smb2_init_seq[i].addr);
+ smb_init_seq[i].val, smb_init_seq[i].addr);
rc = regmap_update_bits(chip->regmap,
- chip->base + smb2_init_seq[i].addr,
- smb2_init_seq[i].mask,
- smb2_init_seq[i].val);
+ chip->base + smb_init_seq[i].addr,
+ smb_init_seq[i].mask,
+ smb_init_seq[i].val);
if (rc < 0)
return dev_err_probe(chip->dev, rc,
"%s: init command %d failed\n",
@@ -904,7 +904,7 @@ static int smb2_init_hw(struct smb2_chip *chip)
return 0;
}
-static int smb2_init_irq(struct smb2_chip *chip, int *irq, const char *name,
+static int smb_init_irq(struct smb_chip *chip, int *irq, const char *name,
irqreturn_t (*handler)(int irq, void *data))
{
int irqnum;
@@ -926,11 +926,11 @@ static int smb2_init_irq(struct smb2_chip *chip, int *irq, const char *name,
return 0;
}
-static int smb2_probe(struct platform_device *pdev)
+static int smb_probe(struct platform_device *pdev)
{
struct power_supply_config supply_config = {};
struct power_supply_desc *desc;
- struct smb2_chip *chip;
+ struct smb_chip *chip;
int rc, irq;
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
@@ -961,17 +961,17 @@ static int smb2_probe(struct platform_device *pdev)
"Couldn't get usbin_i IIO channel\n");
}
- rc = smb2_init_hw(chip);
+ rc = smb_init_hw(chip);
if (rc < 0)
return rc;
supply_config.drv_data = chip;
supply_config.of_node = pdev->dev.of_node;
- desc = devm_kzalloc(chip->dev, sizeof(smb2_psy_desc), GFP_KERNEL);
+ desc = devm_kzalloc(chip->dev, sizeof(smb_psy_desc), GFP_KERNEL);
if (!desc)
return -ENOMEM;
- memcpy(desc, &smb2_psy_desc, sizeof(smb2_psy_desc));
+ memcpy(desc, &smb_psy_desc, sizeof(smb_psy_desc));
desc->name =
devm_kasprintf(chip->dev, GFP_KERNEL, "%s-charger",
(const char *)device_get_match_data(chip->dev));
@@ -990,7 +990,7 @@ static int smb2_probe(struct platform_device *pdev)
"Failed to get battery info\n");
rc = devm_delayed_work_autocancel(chip->dev, &chip->status_change_work,
- smb2_status_change_work);
+ smb_status_change_work);
if (rc)
return dev_err_probe(chip->dev, rc,
"Failed to init status change work\n");
@@ -1002,20 +1002,20 @@ static int smb2_probe(struct platform_device *pdev)
if (rc < 0)
return dev_err_probe(chip->dev, rc, "Couldn't set vbat max\n");
- rc = smb2_init_irq(chip, &irq, "bat-ov", smb2_handle_batt_overvoltage);
+ rc = smb_init_irq(chip, &irq, "bat-ov", smb_handle_batt_overvoltage);
if (rc < 0)
return rc;
- rc = smb2_init_irq(chip, &chip->cable_irq, "usb-plugin",
- smb2_handle_usb_plugin);
+ rc = smb_init_irq(chip, &chip->cable_irq, "usb-plugin",
+ smb_handle_usb_plugin);
if (rc < 0)
return rc;
- rc = smb2_init_irq(chip, &irq, "usbin-icl-change",
- smb2_handle_usb_icl_change);
+ rc = smb_init_irq(chip, &irq, "usbin-icl-change",
+ smb_handle_usb_icl_change);
if (rc < 0)
return rc;
- rc = smb2_init_irq(chip, &irq, "wdog-bark", smb2_handle_wdog_bark);
+ rc = smb_init_irq(chip, &irq, "wdog-bark", smb_handle_wdog_bark);
if (rc < 0)
return rc;
@@ -1031,22 +1031,22 @@ static int smb2_probe(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id smb2_match_id_table[] = {
+static const struct of_device_id smb_match_id_table[] = {
{ .compatible = "qcom,pmi8998-charger", .data = "pmi8998" },
{ .compatible = "qcom,pm660-charger", .data = "pm660" },
{ /* sentinal */ }
};
-MODULE_DEVICE_TABLE(of, smb2_match_id_table);
+MODULE_DEVICE_TABLE(of, smb_match_id_table);
-static struct platform_driver qcom_spmi_smb2 = {
- .probe = smb2_probe,
+static struct platform_driver qcom_spmi_smb = {
+ .probe = smb_probe,
.driver = {
- .name = "qcom-pmi8998/pm660-charger",
- .of_match_table = smb2_match_id_table,
+ .name = "qcom-smbx-charger",
+ .of_match_table = smb_match_id_table,
},
};
-module_platform_driver(qcom_spmi_smb2);
+module_platform_driver(qcom_spmi_smb);
MODULE_AUTHOR("Caleb Connolly <caleb.connolly@linaro.org>");
MODULE_DESCRIPTION("Qualcomm SMB2 Charger Driver");
--
2.53.0
next prev parent reply other threads:[~2026-11-10 12:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-07 10:16 FAILED: patch "[PATCH] power: supply: qcom_smbx: validate battery float voltage" failed to apply to 6.12-stable tree Sasha Levin
2026-11-10 12:25 ` Sasha Levin [this message]
2026-11-10 12:25 ` [PATCH 6.12.y 2/2] power: supply: qcom_smbx: validate battery float voltage Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261110122522.1154709-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=casey.connolly@linaro.org \
--cc=sebastian.reichel@collabora.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox