[PATCH 6.18.y 2/2] media: i2c: og01a1b: power off sensor on remove

[Sasha Levin <sashal@kernel.org>]

From: Guangshuo Li <lgs201920130244@gmail.com>

[ Upstream commit a26c5ac46191ae34b3413f7a45d6241f63e15d42 ]

og01a1b_probe() powers the sensor on explicitly before identifying and
initializing it. After a successful probe, runtime PM is enabled and
pm_runtime_idle() is used to allow the runtime suspend callback to
power the sensor off.

The probe error path explicitly calls og01a1b_power_off(), but the
normal remove path only disables runtime PM. pm_runtime_disable() does
not guarantee that an active device is runtime suspended, so the
sensor can remain powered when the driver is removed. This also leaves
the xvclk enable performed by og01a1b_power_on() unbalanced.

After disabling runtime PM, check whether the device is already
suspended. If it is still active, power the sensor off explicitly and
update the runtime PM state accordingly. Avoid powering it off again
when runtime suspend has already done so.

This issue was found by manual code inspection.

Fixes: a95ffde28783 ("media: i2c: og01a1b: Add support of xvclk supply clock in power management")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/og01a1b.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/i2c/og01a1b.c b/drivers/media/i2c/og01a1b.c
index 4b6b9ac24594b..68ebf44876781 100644
--- a/drivers/media/i2c/og01a1b.c
+++ b/drivers/media/i2c/og01a1b.c
@@ -1026,6 +1026,11 @@ static void og01a1b_remove(struct i2c_client *client)
 	media_entity_cleanup(&sd->entity);
 	v4l2_ctrl_handler_free(sd->ctrl_handler);
 	pm_runtime_disable(og01a1b->dev);
+
+	if (!pm_runtime_status_suspended(og01a1b->dev)) {
+		og01a1b_power_off(og01a1b->dev);
+		pm_runtime_set_suspended(og01a1b->dev);
+	}
 }
 
 static int og01a1b_probe(struct i2c_client *client)
-- 
2.53.0