[PATCH 6.18.y 1/2] cxl/port: Cleanup handling of the nr_dports 0 -> 1 transition

[Sasha Levin <sashal@kernel.org>]

From: Dan Williams <dan.j.williams@intel.com>

[ Upstream commit 47fec713d97fb6b823026f723435b58af541bd8d ]

There are multiple setup actions that can occur for a switch port after it
is known that it has at least one active downstream link. That work is
currently split between __devm_cxl_add_dport(), the add_dport() helper, and
cxl_port_add_dport() where decoder setup occurs.

Clean this up by moving all @dport object setup responsibilities into
add_dport() and all port effects into cxl_port_add_dport().

add_dport() handles taking a reference on @dport->dport_dev, and
cxl_port_add_dport() grows the awareness to setup the port component
registers. This removes an awkward open-coded xa_erase() from the middle of
__devm_cxl_add_dport() and instead tasks cxl_port_add_dport() with calling
the common @dport destruction path if anything goes wrong.

After this @port->nr_dports is always the count of @dports in the
@port->dports xarray, and cxl_dport_remove() is symmetric with add_dport().
With ->nr_dports now reliably tracking the number of dports the use of
ida_is_empty() can be dropped. Recall that the ida is only cleared on
"release" of decoder objects, and release can be arbitrarily delayed past
unregistration.

Lastly port->component_reg_phys is no longer reset to CXL_RESOURCE_NONE
post setup, no reason is seen to carry that forward.

Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260131000403.2135324-2-dan.j.williams@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Stable-dep-of: 019560d23450 ("cxl/port: Clear cached dport pointers when a dport is removed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cxl/core/port.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index 599aa9d9eddca..a7d3497f82c05 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -1073,11 +1073,15 @@ static int add_dport(struct cxl_port *port, struct cxl_dport *dport)
 		return -EBUSY;
 	}
 
+	/* Arrange for dport_dev to be valid through remove_dport() */
+	struct device *dev __free(put_device) = get_device(dport->dport_dev);
+
 	rc = xa_insert(&port->dports, (unsigned long)dport->dport_dev, dport,
 		       GFP_KERNEL);
 	if (rc)
 		return rc;
 
+	retain_and_null_ptr(dev);
 	port->nr_dports++;
 	return 0;
 }
@@ -1106,6 +1110,7 @@ static void cxl_dport_remove(void *data)
 	struct cxl_dport *dport = data;
 	struct cxl_port *port = dport->port;
 
+	port->nr_dports--;
 	xa_erase(&port->dports, (unsigned long) dport->dport_dev);
 	put_device(dport->dport_dev);
 }
@@ -1188,21 +1193,6 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev,
 	if (rc)
 		return ERR_PTR(rc);
 
-	/*
-	 * Setup port register if this is the first dport showed up. Having
-	 * a dport also means that there is at least 1 active link.
-	 */
-	if (port->nr_dports == 1 &&
-	    port->component_reg_phys != CXL_RESOURCE_NONE) {
-		rc = cxl_port_setup_regs(port, port->component_reg_phys);
-		if (rc) {
-			xa_erase(&port->dports, (unsigned long)dport->dport_dev);
-			return ERR_PTR(rc);
-		}
-		port->component_reg_phys = CXL_RESOURCE_NONE;
-	}
-
-	get_device(dport_dev);
 	rc = devm_add_action_or_reset(host, cxl_dport_remove, dport);
 	if (rc)
 		return ERR_PTR(rc);
@@ -1629,7 +1619,16 @@ static struct cxl_dport *cxl_port_add_dport(struct cxl_port *port,
 
 	cxl_switch_parse_cdat(new_dport);
 
-	if (ida_is_empty(&port->decoder_ida)) {
+	if (port->nr_dports == 1) {
+		/*
+		 * Some host bridges are known to not have component regsisters
+		 * available until a root port has trained CXL. Perform that
+		 * setup now.
+		 */
+		rc = cxl_port_setup_regs(port, port->component_reg_phys);
+		if (rc)
+			return ERR_PTR(rc);
+
 		rc = devm_cxl_switch_port_decoders_setup(port);
 		if (rc)
 			return ERR_PTR(rc);
-- 
2.53.0