From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Ma Ke <make_ruc2021@163.com>, Takashi Iwai <tiwai@suse.de>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.12.y 2/2] ALSA: hda: cs35l41: Fix ACPI device reference leak on probe failure
Date: Tue, 10 Nov 2026 11:16:23 -0500 [thread overview]
Message-ID: <20261110161612.2453887-2-sashal@kernel.org> (raw)
In-Reply-To: <20261110161612.2453887-1-sashal@kernel.org>
From: Ma Ke <make_ruc2021@163.com>
[ Upstream commit 8d70e364e866bdfca81eee24d0688fac9472cfb9 ]
cs35l41_hda_probe() takes an acpi_device through
cs35l41_hda_read_acpi() and stores it in cs35l41->dacpi. Only the
failures that happen later reach the err: label, which is where that
reference and cs35l41->acpi_subsystem_id are released, so the early
return taken when cs35l41_hda_read_acpi() fails leaves both behind.
Keep the ownership in the caller instead of dropping the reference
inside cs35l41_hda_read_acpi(). That removes the need to work out
whether a given failure path has already released it, and with it the
double put that cs35l41_hda_parse_acpi() would otherwise cause when it
fails after having released the device itself.
cs35l41_hda_parse_acpi() and the !physdev path no longer put the
reference, and the early failure enters the existing err: cleanup tail
through a new err_acpi label.
The label sits between the reset of the codec and the gpio cleanup, so
an early failure also releases the reset and chip-select descriptors
that cs35l41_hda_parse_acpi() may already have taken, while still
skipping cs35l41_safe_reset() on a codec that was never brought up.
cs35l41->dacpi comes from devm_kzalloc() and is only assigned once the
ACPI device has been found, so the put is a no-op when the lookup
itself failed.
Found by code review.
Fixes: 447106e92a0c ("ALSA: hda: cs35l41: Support mute notifications for CS35L41 HDA")
Cc: stable@vger.kernel.org
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Link: https://patch.msgid.link/20261012084152.3740340-1-make_ruc2021@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/pci/hda/cs35l41_hda.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index d01691c13bf33..210cf48faceca 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -1887,7 +1887,6 @@ int cs35l41_hda_parse_acpi(struct cs35l41_hda *cs35l41, struct device *physdev,
hw_cfg->valid = false;
hw_cfg->gpio1.valid = false;
hw_cfg->gpio2.valid = false;
- acpi_dev_put(cs35l41->dacpi);
return ret;
}
@@ -1908,10 +1907,8 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
cs35l41->dacpi = adev;
struct device *physdev __free(put_device) =
get_device(acpi_get_first_physical_node(adev));
- if (!physdev) {
- acpi_dev_put(adev);
+ if (!physdev)
return -ENODEV;
- }
sub = acpi_get_subsystem_id(ACPI_HANDLE(physdev));
if (IS_ERR(sub))
@@ -1966,8 +1963,10 @@ int cs35l41_hda_probe(struct device *dev, const char *device_name, int id, int i
dev_set_drvdata(dev, cs35l41);
ret = cs35l41_hda_read_acpi(cs35l41, device_name, id);
- if (ret)
- return dev_err_probe(cs35l41->dev, ret, "Platform not supported\n");
+ if (ret) {
+ dev_err_probe(cs35l41->dev, ret, "Platform not supported\n");
+ goto err_acpi;
+ }
if (IS_ERR(cs35l41->reset_gpio)) {
ret = PTR_ERR(cs35l41->reset_gpio);
@@ -2055,6 +2054,7 @@ int cs35l41_hda_probe(struct device *dev, const char *device_name, int id, int i
err:
if (cs35l41_safe_reset(cs35l41->regmap, cs35l41->hw_cfg.bst_type))
gpiod_set_value_cansleep(cs35l41->reset_gpio, 0);
+err_acpi:
gpiod_put(cs35l41->reset_gpio);
gpiod_put(cs35l41->cs_gpio);
acpi_dev_put(cs35l41->dacpi);
--
2.53.0
prev parent reply other threads:[~2026-11-10 16:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-07 10:21 FAILED: patch "[PATCH] ALSA: hda: cs35l41: Fix ACPI device reference leak on probe failure" failed to apply to 6.12-stable tree Sasha Levin
2026-11-10 16:16 ` [PATCH 6.12.y 1/2] ALSA: hda: cs35l41: Use auto-cleanup for put_device() Sasha Levin
2026-11-10 16:16 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261110161612.2453887-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=make_ruc2021@163.com \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox