[PATCH 6.12.y 2/2] wifi: brcmfmac: cfg80211: Report port_authorized for 4-way HS offload

[Sasha Levin <sashal@kernel.org>]

From: Janne Grunau <j@jannau.net>

[ Upstream commit 6fff9de5c5b425817588eeed42bd56d665751c13 ]

Since commit 416386060 ("Mark authorization completed on driver
indication during 4-way HS offload") [0] wpa_supplicant expects
NL80211_CMD_PORT_AUTHORIZED to complete the authentication when the
driver supports 4-way handshake offload.
This was apparently never tested with the upstream brcmfmac driver as it
does not report this. This broke authentication on Apple silicon devices
(BRCM4378, BRMC4387, BRMC4388) and other devices when wpa_supplicant
2.11 was released [1]. This was initially dealt with by reverting the
commit in Fedora [2] and other Linux distributions.
Instead of carrying the revert over to wpa_supplicant 2.12 add the
expected NL80211_CMD_PORT_AUTHORIZED when the connection is established.

The "Fixes:" tag is not fully accurate as this has only became an issue
after userspace changes years after the change. Since the change is
expected to be required in all active stable branches for wpa_supplicant
2.11 / 2.12 compatibility it is helpful even though
BRCMF_PROFILE_FWSUP_SAE did not exists then.

Link: https://github.com/zephyrproject-rtos/hostap/commit/41638606054a09867fe3f9a2b5523aa4678cbfa5 [0]
Link: https://lists.infradead.org/pipermail/hostap/2024-August/042893.html [1]
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2302577 [2]
Link: https://lore.kernel.org/linux-wireless/20260911065656.1269623-5-Jason.Huang2@infineon.com/ [3]
Cc: stable@vger.kernel.org
Fixes: b8a64f0e96c2 ("brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSK")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260915-brcmfmac-4way-handshake-offload-authenticated-event-v2-1-fbb9cc7ac177@jannau.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[ sashal: Inlined the PSK/SAE authorization check because the baseline lacks upstream roaming and PMKID authorization support. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c    | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index c3a3a08179109..a2a0cc43bc721 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -6424,6 +6424,7 @@ brcmf_bss_connect_done(struct brcmf_cfg80211_info *cfg,
 	struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
 	struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg);
 	struct cfg80211_connect_resp_params conn_params;
+	bool authorized;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -6448,7 +6449,13 @@ brcmf_bss_connect_done(struct brcmf_cfg80211_info *cfg,
 		conn_params.req_ie_len = conn_info->req_ie_len;
 		conn_params.resp_ie = conn_info->resp_ie;
 		conn_params.resp_ie_len = conn_info->resp_ie_len;
+		authorized = completed &&
+			     (profile->use_fwsup == BRCMF_PROFILE_FWSUP_SAE ||
+			      profile->use_fwsup == BRCMF_PROFILE_FWSUP_PSK);
 		cfg80211_connect_done(ndev, &conn_params, GFP_KERNEL);
+		if (authorized)
+			cfg80211_port_authorized(ndev, profile->bssid, NULL, 0,
+						 GFP_KERNEL);
 		brcmf_dbg(CONN, "Report connect result - connection %s\n",
 			  completed ? "succeeded" : "failed");
 	}
-- 
2.53.0