From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Devin Wittmayer <lucid_duck@justthetip.ca>,
Chris <hoopyfrood42@gmail.com>, Felix Fietkau <nbd@nbd.name>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.12.y] wifi: mt76: move the channel survey when the channel changes
Date: Tue, 10 Nov 2026 17:14:30 -0500 [thread overview]
Message-ID: <20261110220413.3980988-1-sashal@kernel.org> (raw)
In-Reply-To: <20261107052003-failed-6.12-68342a7bd7e5@kernel.org>
From: Devin Wittmayer <lucid_duck@justthetip.ca>
[ Upstream commit 68342a7bd7e5e273e2969e3c0f4c62ee3d006ce8 ]
mt7921 and mt7925 report every survey counter against one channel and
never mark the one in use. With firmware channel management, both use
channel contexts and never call __mt76_set_channel(), so
phy->chan_state, phy->chandef and phy->main_chandef keep the first
channel of the band.
Update them when a context is assigned or changed, after booking the
time spent on the old channel. This also makes the legacy rate lookup
in mt76_connac2_mac_fill_txs() and mt7925_mac_add_txs_skb() use the
band of the current channel.
With two channel contexts (multi-channel or MLO), the survey follows
the context that was assigned or changed last, since the driver reads
the band 0 counters only.
Tested on MT7922 over PCIe, MT7921AU and MT7925 over USB.
Fixes: 41ac53c899bd ("wifi: mt76: mt7921: introduce chanctx support")
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: stable@vger.kernel.org
Reported-by: Chris <hoopyfrood42@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CAHaeJsT8O8Nhq351hFp3NAL8e0iU85N-LBdYZ9nYHFHVy7t_hQ@mail.gmail.com/
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20261001003501.2425492-1-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[ sashal: Changed phy->main_chandef = *chandef to phy->main_chan = chandef->chan. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mac80211.c | 14 ++++++++++++++
drivers/net/wireless/mediatek/mt76/mt76.h | 2 ++
drivers/net/wireless/mediatek/mt76/mt7921/main.c | 1 +
drivers/net/wireless/mediatek/mt76/mt7925/main.c | 2 ++
drivers/net/wireless/mediatek/mt76/mt792x_core.c | 1 +
5 files changed, 20 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mac80211.c b/drivers/net/wireless/mediatek/mt76/mac80211.c
index cd02dff7ab347..13e6594945180 100644
--- a/drivers/net/wireless/mediatek/mt76/mac80211.c
+++ b/drivers/net/wireless/mediatek/mt76/mac80211.c
@@ -973,6 +973,20 @@ void mt76_update_survey(struct mt76_phy *phy)
}
EXPORT_SYMBOL_GPL(mt76_update_survey);
+void mt76_phy_chandef_set(struct mt76_phy *phy,
+ struct cfg80211_chan_def *chandef)
+{
+ if (!chandef->chan)
+ return;
+
+ mt76_update_survey(phy);
+
+ phy->chandef = *chandef;
+ phy->main_chan = chandef->chan;
+ phy->chan_state = mt76_channel_state(phy, chandef->chan);
+}
+EXPORT_SYMBOL_GPL(mt76_phy_chandef_set);
+
int mt76_set_channel(struct mt76_phy *phy, struct cfg80211_chan_def *chandef,
bool offchannel)
{
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 8addbffa97c55..d709b74159689 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -1400,6 +1400,8 @@ void mt76_release_buffered_frames(struct ieee80211_hw *hw,
bool mt76_has_tx_pending(struct mt76_phy *phy);
int mt76_update_channel(struct mt76_phy *phy);
void mt76_update_survey(struct mt76_phy *phy);
+void mt76_phy_chandef_set(struct mt76_phy *phy,
+ struct cfg80211_chan_def *chandef);
void mt76_update_survey_active_time(struct mt76_phy *phy, ktime_t time);
int mt76_get_survey(struct ieee80211_hw *hw, int idx,
struct survey_info *survey);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 99561094640f1..18eb934da570a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -1394,6 +1394,7 @@ mt7921_change_chanctx(struct ieee80211_hw *hw,
mt7921_mcu_config_sniffer(mvif, ctx);
else
mt76_connac_mcu_uni_set_chctx(mvif->phy->mt76, &mvif->bss_conf.mt76, ctx);
+ mt76_phy_chandef_set(mvif->phy->mt76, &ctx->def);
mt792x_mutex_release(phy->dev);
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/main.c b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
index 9a52607dc5a8f..dba0f48922072 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
@@ -1873,6 +1873,7 @@ mt7925_change_chanctx(struct ieee80211_hw *hw,
link_conf, ctx);
}
}
+ mt76_phy_chandef_set(mvif->phy->mt76, &ctx->def);
mt792x_mutex_release(phy->dev);
}
@@ -2170,6 +2171,7 @@ static int mt7925_assign_vif_chanctx(struct ieee80211_hw *hw,
mconf->mt76.ctx = ctx;
mctx->bss_conf = mconf;
+ mt76_phy_chandef_set(mvif->phy->mt76, &ctx->def);
mutex_unlock(&dev->mt76.mutex);
return 0;
diff --git a/drivers/net/wireless/mediatek/mt76/mt792x_core.c b/drivers/net/wireless/mediatek/mt76/mt792x_core.c
index a3ca93c9af63e..86b45807481fe 100644
--- a/drivers/net/wireless/mediatek/mt76/mt792x_core.c
+++ b/drivers/net/wireless/mediatek/mt76/mt792x_core.c
@@ -308,6 +308,7 @@ int mt792x_assign_vif_chanctx(struct ieee80211_hw *hw,
mutex_lock(&dev->mt76.mutex);
mvif->bss_conf.mt76.ctx = ctx;
mctx->bss_conf = &mvif->bss_conf;
+ mt76_phy_chandef_set(&dev->mphy, &ctx->def);
mutex_unlock(&dev->mt76.mutex);
return 0;
--
2.53.0
prev parent reply other threads:[~2026-11-10 22:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-07 10:20 FAILED: patch "[PATCH] wifi: mt76: move the channel survey when the channel changes" failed to apply to 6.12-stable tree Sasha Levin
2026-11-10 22:14 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261110220413.3980988-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=hoopyfrood42@gmail.com \
--cc=lucid_duck@justthetip.ca \
--cc=nbd@nbd.name \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox