Linux kernel -stable discussions
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Sinan Turunc <enscrpt@pm.me>, Takashi Iwai <tiwai@suse.de>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.6.y] ALSA: usb-audio: Bound packet copies by the PCM buffer size
Date: Tue, 10 Nov 2026 22:38:37 -0500	[thread overview]
Message-ID: <20261111033812.968109-1-sashal@kernel.org> (raw)
In-Reply-To: <20261107053950-failed-6.6-06be918062ad@kernel.org>

From: Sinan Turunc <enscrpt@pm.me>

[ Upstream commit 06be918062adc1a5a76dc346803b136b20bdb5ae ]

retire_capture_urb() and prepare_playback_urb() assume that one USB
packet never carries more data than the whole ALSA ring buffer. Nothing
enforces that: the packet size comes from the device (wMaxPacketSize,
and curpacksize == maxpacksize when the class-specific endpoint
descriptor sets MaxPacketsOnly), while the PCM hardware constraints only
require 64-byte periods, two periods and a period time of one data
interval. An 8 kHz mono U8 stream on a 128-byte buffer is legal, and a
full-speed device can send 1023-byte packets into it.

On the first oversized packet hwptr_done is wrapped once and stays
beyond buffer_bytes (895 for 1023 bytes into 128). On the next packet
the wrap arithmetic in the copy path computes

    bytes1 = subs->buffer_bytes - oldptr

with oldptr > buffer_bytes, so bytes1 wraps to about 4 GB and memcpy()
runs off the end of the URB buffer and of the vmalloc'd DMA buffer:

  BUG: KASAN: slab-out-of-bounds in retire_capture_urb+0x251/0x870
  Read of size 4294966529 at addr ffff88800c1e2800 by task vhci_rx/82

and for playback, where copy_to_urb() has the same shape:

  BUG: KASAN: vmalloc-out-of-bounds in copy_to_urb.isra.0+0x188/0x430
  Read of size 4294966529 at addr ffffc9000004537f by task vhci_rx/79
   prepare_playback_urb+0x98a/0x1fc0

Truncate an oversized capture packet to the buffer size, and stop
filling a playback URB once it holds a whole buffer. With bytes <=
buffer_bytes the single wrap of hwptr_done and the two-part memcpy()
in both copy paths stay inside the buffer. A device whose packets do
not fit the buffer at all was never going to play correctly anyway.

Reproduced on 7.3-rc7 with a USB/IP device (dummy_hcd cannot carry
isochronous data) advertising a UAC1 endpoint with MaxPacketsOnly and
wMaxPacketSize 1023, and a PCM client using period_size 64, periods 2.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Sinan Turunc <enscrpt@pm.me>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20261026223543.620-2-enscrpt@pm.me
[ sashal: adjusted indentation to match the less-nested packet loop in prepare_playback_urb() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/pcm.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 5aadd1221f725..dd7554cde865d 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -1292,6 +1292,18 @@ static void retire_capture_urb(struct snd_usb_substream *subs,
 			bytes -= adj;
 			subs->stream_offset_adj -= adj;
 		}
+		/*
+		 * A packet can be as large as the endpoint's maxpacksize, which
+		 * the device chooses, while the ring buffer can be as small as
+		 * two 64-byte periods. The hwptr_done wrap below handles one
+		 * wrap only, so never take more than one buffer from a packet.
+		 */
+		if (unlikely(bytes > subs->buffer_bytes)) {
+			dev_warn_ratelimited(&subs->dev->dev,
+					     "%u-byte packet exceeds %u-byte buffer, truncating\n",
+					     bytes, subs->buffer_bytes);
+			bytes = subs->buffer_bytes;
+		}
 		frames = bytes / stride;
 		if (!subs->txfr_quirk)
 			bytes = frames * stride;
@@ -1505,8 +1517,14 @@ static int prepare_playback_urb(struct snd_usb_substream *subs,
 
 	for (i = 0; i < ctx->packets; i++) {
 		counts = snd_usb_endpoint_next_packet_size(ep, ctx, i, avail);
+		/*
+		 * Bound by the ring buffer as well as by the URB:
+		 * copy_to_urb() wraps hwptr_done once, so one URB must
+		 * never carry more than the whole buffer.
+		 */
 		if (counts < 0 ||
-		    (frames + counts) * stride > ctx->buffer_size)
+		    (frames + counts) * stride > ctx->buffer_size ||
+		    (frames + counts) * stride > subs->buffer_bytes)
 			break;
 		/* set up descriptor */
 		urb->iso_frame_desc[i].offset = frames * stride;
-- 
2.53.0


      reply	other threads:[~2026-11-11  3:38 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-07 10:39 FAILED: patch "[PATCH] ALSA: usb-audio: Bound packet copies by the PCM buffer size" failed to apply to 6.6-stable tree Sasha Levin
2026-11-11  3:38 ` Sasha Levin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261111033812.968109-1-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=enscrpt@pm.me \
    --cc=stable@vger.kernel.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox