From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: David Carlier <devnexen@gmail.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.18.y 2/2] media: ipu6: Fix firmware config leak on stream start
Date: Wed, 11 Nov 2026 12:26:54 -0500 [thread overview]
Message-ID: <20261111172647.3568812-2-sashal@kernel.org> (raw)
In-Reply-To: <20261111172647.3568812-1-sashal@kernel.org>
From: David Carlier <devnexen@gmail.com>
[ Upstream commit d3d9bc694fe087c672c3ad5871984dc45cd9f425 ]
ipu6_isys_fwcom_cfg_init() runs on every first stream start and allocates
the firmware config and queue configs with devm, so each STREAMON/STREAMOFF
cycle leaks them. They are only needed until ipu6_fw_com_prepare() has
copied them, so free them right after. Also check the return value, an
allocation failure would otherwise make ipu6_fw_com_prepare() dereference
a NULL queue config.
Fixes: f625e8d7ffc1 ("media: intel/ipu6: input system ABI between firmware and driver")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/pci/intel/ipu6/ipu6-fw-isys.c | 34 +++++++++++++++------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/media/pci/intel/ipu6/ipu6-fw-isys.c b/drivers/media/pci/intel/ipu6/ipu6-fw-isys.c
index a65e9f1aa1042..9f5bd9c4ddf91 100644
--- a/drivers/media/pci/intel/ipu6/ipu6-fw-isys.c
+++ b/drivers/media/pci/intel/ipu6/ipu6-fw-isys.c
@@ -218,7 +218,6 @@ static int ipu6_isys_fwcom_cfg_init(struct ipu6_isys *isys,
unsigned int max_send_queues, max_sram_blocks, max_devq_size;
struct ipu6_fw_syscom_queue_config *input_queue_cfg;
struct ipu6_fw_syscom_queue_config *output_queue_cfg;
- struct device *dev = &isys->adev->auxdev.dev;
int type_proxy = IPU6_FW_ISYS_QUEUE_TYPE_PROXY;
int type_dev = IPU6_FW_ISYS_QUEUE_TYPE_DEV;
int type_msg = IPU6_FW_ISYS_QUEUE_TYPE_MSG;
@@ -228,7 +227,6 @@ static int ipu6_isys_fwcom_cfg_init(struct ipu6_isys *isys,
struct ipu6_fw_isys_fw_config *isys_fw_cfg;
u32 num_in_message_queues;
unsigned int max_streams;
- unsigned int size;
unsigned int i;
max_streams = isys->pdata->ipdata->max_streams;
@@ -236,7 +234,7 @@ static int ipu6_isys_fwcom_cfg_init(struct ipu6_isys *isys,
max_sram_blocks = isys->pdata->ipdata->max_sram_blocks;
max_devq_size = isys->pdata->ipdata->max_devq_size;
num_in_message_queues = clamp(num_streams, 1U, max_streams);
- isys_fw_cfg = devm_kzalloc(dev, sizeof(*isys_fw_cfg), GFP_KERNEL);
+ isys_fw_cfg = kzalloc_obj(*isys_fw_cfg);
if (!isys_fw_cfg)
return -ENOMEM;
@@ -248,15 +246,14 @@ static int ipu6_isys_fwcom_cfg_init(struct ipu6_isys *isys,
isys_fw_cfg->num_recv_queues[type_dev] = 0;
isys_fw_cfg->num_recv_queues[type_msg] = 1;
- size = sizeof(*input_queue_cfg) * max_send_queues;
- input_queue_cfg = devm_kzalloc(dev, size, GFP_KERNEL);
+ input_queue_cfg = kzalloc_objs(*input_queue_cfg, max_send_queues);
if (!input_queue_cfg)
- return -ENOMEM;
+ goto err_free_fw_cfg;
- size = sizeof(*output_queue_cfg) * IPU6_N_MAX_RECV_QUEUES;
- output_queue_cfg = devm_kzalloc(dev, size, GFP_KERNEL);
+ output_queue_cfg = kzalloc_objs(*output_queue_cfg,
+ IPU6_N_MAX_RECV_QUEUES);
if (!output_queue_cfg)
- return -ENOMEM;
+ goto err_free_input_queue_cfg;
fwcom_cfg->input = input_queue_cfg;
fwcom_cfg->output = output_queue_cfg;
@@ -321,6 +318,20 @@ static int ipu6_isys_fwcom_cfg_init(struct ipu6_isys *isys,
fwcom_cfg->specific_size = sizeof(*isys_fw_cfg);
return 0;
+
+err_free_input_queue_cfg:
+ kfree(input_queue_cfg);
+err_free_fw_cfg:
+ kfree(isys_fw_cfg);
+
+ return -ENOMEM;
+}
+
+static void ipu6_isys_fwcom_cfg_free(struct ipu6_fw_com_cfg *fwcom_cfg)
+{
+ kfree(fwcom_cfg->specific_addr);
+ kfree(fwcom_cfg->output);
+ kfree(fwcom_cfg->input);
}
int ipu6_fw_isys_init(struct ipu6_isys *isys, unsigned int num_streams)
@@ -334,10 +345,13 @@ int ipu6_fw_isys_init(struct ipu6_isys *isys, unsigned int num_streams)
};
int ret;
- ipu6_isys_fwcom_cfg_init(isys, &fwcom_cfg, num_streams);
+ ret = ipu6_isys_fwcom_cfg_init(isys, &fwcom_cfg, num_streams);
+ if (ret)
+ return ret;
isys->fwctx = ipu6_fw_com_prepare(&fwcom_cfg, isys->adev,
isys->pdata->base);
+ ipu6_isys_fwcom_cfg_free(&fwcom_cfg);
if (!isys->fwctx) {
dev_err(dev, "isys fw com prepare failed\n");
return -EIO;
--
2.53.0
prev parent reply other threads:[~2026-11-11 17:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-07 10:07 FAILED: patch "[PATCH] media: ipu6: Fix firmware config leak on stream start" failed to apply to 6.18-stable tree Sasha Levin
2026-11-11 17:26 ` [PATCH 6.18.y 1/2] media: ipu6: Rename pointer to firmware context Sasha Levin
2026-11-11 17:26 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261111172647.3568812-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=devnexen@gmail.com \
--cc=sakari.ailus@linux.intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox