From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Myeonghun Pak <mhun512@gmail.com>, Ijae Kim <ae878000@gmail.com>,
Guenter Roeck <linux@roeck-us.net>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.1.y] hwmon: (sht15) Stop deferred work before releasing its resources
Date: Thu, 12 Nov 2026 15:48:43 -0500 [thread overview]
Message-ID: <20261112204652.3667601-1-sashal@kernel.org> (raw)
In-Reply-To: <20261109201615-failed-6.1-5eab1e7f7ed1@kernel.org>
From: Myeonghun Pak <mhun512@gmail.com>
[ Upstream commit 5eab1e7f7ed12893f3864fe46ffcd5a41a752d6a ]
The IRQ handler and regulator notifier can leave work pending after a
measurement or notification completes. Neither work item is drained before
its resources are released on removal or probe failure.
Disable read_work before freeing the IRQ, since the worker can re-enable
it. Use request_irq()/free_irq() for explicit teardown. Unregister the
regulator notifier before cancelling update_supply_work and disabling the
regulator. Apply the same ordering to probe failures.
Fixes: 251eb40f5ccd ("hwmon: sht15 humidity sensor driver")
Cc: stable@vger.kernel.org
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Link: https://patch.msgid.link/20261024014044.27853-1-mhun512@gmail.com
[groeck: Dropped obsolete 'Assisted-by: tag]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ sashal: replaced disable_work_sync() with cancel_work_sync() after guarding the read state and disabling the IRQ ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwmon/sht15.c | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index ae4d14257a11d..a0f2f1a2beb87 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -31,6 +31,7 @@
#include <linux/bitrev.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
+#include <linux/workqueue.h>
/* Commands */
#define SHT15_MEASURE_TEMP 0x03
@@ -804,7 +805,7 @@ static irqreturn_t sht15_interrupt_fired(int irq, void *d)
disable_irq_nosync(irq);
atomic_inc(&data->interrupt_handled);
/* Then schedule a reading work struct */
- if (data->state != SHT15_READING_NOTHING)
+ if (READ_ONCE(data->state) != SHT15_READING_NOTHING)
schedule_work(&data->read_work);
return IRQ_HANDLED;
}
@@ -976,11 +977,8 @@ static int sht15_probe(struct platform_device *pdev)
goto err_release_reg;
}
- ret = devm_request_irq(&pdev->dev, gpiod_to_irq(data->data),
- sht15_interrupt_fired,
- IRQF_TRIGGER_FALLING,
- "sht15 data",
- data);
+ ret = request_irq(gpiod_to_irq(data->data), sht15_interrupt_fired,
+ IRQF_TRIGGER_FALLING, "sht15 data", data);
if (ret) {
dev_err(&pdev->dev, "failed to get irq for data line\n");
goto err_release_reg;
@@ -988,15 +986,15 @@ static int sht15_probe(struct platform_device *pdev)
disable_irq_nosync(gpiod_to_irq(data->data));
ret = sht15_connection_reset(data);
if (ret)
- goto err_release_reg;
+ goto err_free_irq;
ret = sht15_soft_reset(data);
if (ret)
- goto err_release_reg;
+ goto err_free_irq;
ret = sysfs_create_group(&pdev->dev.kobj, &sht15_attr_group);
if (ret) {
dev_err(&pdev->dev, "sysfs create failed\n");
- goto err_release_reg;
+ goto err_free_irq;
}
data->hwmon_dev = hwmon_device_register(data->dev);
@@ -1009,9 +1007,15 @@ static int sht15_probe(struct platform_device *pdev)
err_release_sysfs_group:
sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group);
+err_free_irq:
+ WRITE_ONCE(data->state, SHT15_READING_NOTHING);
+ disable_irq(gpiod_to_irq(data->data));
+ cancel_work_sync(&data->read_work);
+ free_irq(gpiod_to_irq(data->data), data);
err_release_reg:
if (!IS_ERR(data->reg)) {
regulator_unregister_notifier(data->reg, &data->nb);
+ cancel_work_sync(&data->update_supply_work);
regulator_disable(data->reg);
}
return ret;
@@ -1025,12 +1029,18 @@ static int sht15_remove(struct platform_device *pdev)
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group);
+ WRITE_ONCE(data->state, SHT15_READING_NOTHING);
+ disable_irq(gpiod_to_irq(data->data));
+ cancel_work_sync(&data->read_work);
+ free_irq(gpiod_to_irq(data->data), data);
+
ret = sht15_soft_reset(data);
if (ret)
dev_err(&pdev->dev, "Failed to reset device (%pe)\n", ERR_PTR(ret));
if (!IS_ERR(data->reg)) {
regulator_unregister_notifier(data->reg, &data->nb);
+ cancel_work_sync(&data->update_supply_work);
regulator_disable(data->reg);
}
--
2.53.0
prev parent reply other threads:[~2026-11-12 20:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-10 1:16 FAILED: patch "[PATCH] hwmon: (sht15) Stop deferred work before releasing its resources" failed to apply to 6.1-stable tree Sasha Levin
2026-11-12 20:48 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261112204652.3667601-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=ae878000@gmail.com \
--cc=linux@roeck-us.net \
--cc=mhun512@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox