From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.remote-ip=100.103.45.18 ARC-Seal: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=none; t=1795029973; b=wpezZgJkGYbq/S3tgDQW5CSnO91q3K6yIi7P29fRt10i/r1322qRl3gdedWuuf9/dItu F7kIz/RSSAtPcHZYcSrkKkcQAyvjQ9bcoR9MGbZnRwk5S6okSOqsWbEHEO04I2BBQX/al ggOKNh80NoZFzEecstH25kuaMSo/AgyOB2Cmbz/sMkCGiKtZxOs0644NMlCMk8zwCgVQ+ C1Qqmd2fpM3oWgRJgvv7NTKehslQcmZBWQs7mgGLVjtRSpSL92ZTunZWxKIcvtAAhEt4A CYqH8urYig4fgZdvQjJ+2czMGRAyN6PjqmyCToSORiGeMM6/Y08/rXuzPJsgZ5EQT/g== ARC-Message-Signature: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1795029973; h=Received:DKIM-Signature:From:To:Cc:Subject:Date:Message-ID:X-Mailer: In-Reply-To:References:User-Agent:X-stable:X-Patchwork-Hint: MIME-Version:Content-Transfer-Encoding; bh=nCAkktxLFqzbQbddDABzvGjkqrsRxvmsA9NUKcZb7yE=; b=W9DZVXhWrCs4eYqz5jRlhemzqsJbWOI5B5xCJl1C05ZSqJcQzYVBslNDquObv5OuY2wR /VA5m6xFTTPuq39XT6kkkyNW5R1pkfh4LMWmyOD1Hif6VetA75lyjMCGT2IsUKOOb7zlO W5aWaKkCUobumGqlggtKVduaN88L03pzA0AamAoDyXcZH8lFGRrLtCyApbegP4NXH7ulK V9XAlY76p9tiBUx9riy8CV7n6qOdGNX58oum9b+YsDy7drgje9g47aVgczkxM+yqTT0S4 KkMu6U8InrtmxoHajxb75AnlZUtwDWEAk/q5U/dILOK90hH7k/Z+MeAblfxHs8hHZlQ== ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass header.d=linuxfoundation.org header.i=@linuxfoundation.org header.a=rsa-sha256 header.s=korg header.b="ywpxM/TE"; arc=none smtp.remote-ip=100.103.45.18 Received: from smtp.kernel.org (quasi.space.kernel.org [100.103.45.18]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (prime256v1)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 8028C606A320; Wed, 18 Nov 2026 19:26:13 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linuxfoundation.org header.i=@linuxfoundation.org header.a=rsa-sha256 header.s=korg header.b=ywpxM/TE Received: by smtp.kernel.org (Postfix) with ESMTPSA id DA5291F000C4; Wed, 18 Nov 2026 19:26:12 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linuxfoundation.org; s=korg; t=1795029973; bh=nCAkktxLFqzbQbddDABzvGjkqrsRxvmsA9NUKcZb7yE=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=ywpxM/TEnxmMbqfzq93+SBuYq8llf77wOx+MhvX5rqb2ujdgJR7lyrO4JrIVfS4RW zKQyJZjiPG0Fp/J1CNtCOUrTdljrFL4bH5UeXF+RLoQnlGJZsWHQp1zmLWKAEoGz/0 EB5QJ/0WaO9LKckzj1Q3rgMxEag2KI8Ywiyv14UM= From: Greg Kroah-Hartman To: stable@vger.kernel.org Cc: Greg Kroah-Hartman , patches@lists.linux.dev, Finn Thain , Stan Johnson , Jens Axboe , Sasha Levin Subject: [PATCH 6.12 0540/1756] swim: Dont search beyond the first data mark Date: Wed, 18 Nov 2026 15:44:27 +0100 Message-ID: <20261118150030.646146941@linuxfoundation.org> X-Mailer: git-send-email 2.56.0 In-Reply-To: <20261118150007.957976754@linuxfoundation.org> References: <20261118150007.957976754@linuxfoundation.org> User-Agent: quilt/0.69 X-stable: review X-Patchwork-Hint: ignore X-Mailing-List: stable@vger.kernel.org List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 Content-Transfer-Encoding: 8bit 6.12-stable review patch. If anyone has any objections, please let me know. ------------------ From: Finn Thain [ Upstream commit 79eafa4ccb74be023fd2cae87d75425d6eb903bb ] The ISM chip does an automatic MFM gap/sync search when the Action bit is first set. That search may stop at any of a) post-index gap, b) address field gap or c) data field gap. To find the next sector header, the driver need not search at all. It only has to validate the mark bytes. Once the sector address mark has been validated, swim_read_sector_data() is called to read the sector contents. Between the sector address and data fields lies an intra-sector gap followed by a data field mark. After this mark is validated, the 512-byte data area is read into the IO request buffer. Problem is, if any byte in the data field mark is mis-read, the driver searches the whole sector and then reaches the data field mark in the following sector. The wrong sector is then read into the buffer, and swim_read_sector_data() returns success. The request is silently corrupted. The existing limit on polling loop iterations does constrain the search distance but is inherently tied to CPU speed. This is probably the reason why corruption was only observed on a 68030 system. Discontinue the mark search when the mark bytes fail validation. Fixes: 8852ecd97488 ("m68k: mac - Add SWIM floppy support") Signed-off-by: Finn Thain Tested-by: Stan Johnson Link: https://patch.msgid.link/f6c97153faa0aceceffd3a61d85c0a82903a6b3e.1788513997.git.fthain@linux-m68k.org Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin --- drivers/block/swim_asm.S | 73 ++++++++++++++++++++++------------------ 1 file changed, 40 insertions(+), 33 deletions(-) diff --git a/drivers/block/swim_asm.S b/drivers/block/swim_asm.S index e06aadb411a14..4d6404234bf09 100644 --- a/drivers/block/swim_asm.S +++ b/drivers/block/swim_asm.S @@ -41,18 +41,45 @@ .equ seek_time, 30000 .equ max_retry, 40 .equ sector_size, 512 + .equ .Lmark_sequence_len, 4 .equ .Lhr_crc_error, 0x02 .equ .Lhr_fifo_2bytes, 0x40 .equ .Lhr_fifo_1byte, 0x80 +.Lmfm_mark_check: + /* + * This subroutine reads and validates a mark byte sequence. + * On entry, %a1 and %d4 shall hold the location and length (resp.) + * of the mark byte array. + * %a2 and %a3 shall hold the locations of the handshake and mark + * registers. + * Returns zero in %d1 for success. + */ + + moveq #-1, %d1 + subq #1, %d4 + movew #seek_time, %d2 + +5: tstb %a2@ + dbmi %d2, 5b + bpl 6f + + moveb %a3@, %d3 + cmpb %a1@+, %d3 + dbne %d4, 5b + bne 6f + + moveq #0, %d1 +6: rts + .global swim_read_sector_header swim_read_sector_header: link %a6, #0 moveml %d1-%d5/%a0-%a5,%sp@- movel %a6@(0x0c), %a4 moveq #-1, %d0 - bsr mfm_read_addrmark + bsr .Lmfm_read_header moveml %sp@+, %d1-%d5/%a0-%a5 unlk %a6 rts @@ -62,33 +89,25 @@ sector_address_mark: sector_data_mark: .byte 0xa1, 0xa1, 0xa1, 0xfb -mfm_read_addrmark: +.Lmfm_read_header: movel %a6@(0x08), %a3 lea %a3@(read_handshake), %a2 lea %a3@(read_data), %a5 lea %a3@(read_mark), %a3 - movew #seek_time, %d2 -wait_header_init: moveb #0x18, %a3@(write_mode0 - read_mark) moveb #0x01, %a3@(write_mode1 - read_mark) moveb #0x01, %a3@(write_mode0 - read_mark) tstb %a3@(read_error - read_mark) moveb #0x08, %a3@(write_mode1 - read_mark) - lea sector_address_mark, %a0 - moveq #3, %d1 - -wait_addr_mark_byte: - - tstb %a2@ - dbmi %d2, wait_addr_mark_byte - bpl signal_nonyb + lea sector_address_mark, %a1 + moveq #.Lmark_sequence_len, %d4 + bsr .Lmfm_mark_check + tstl %d1 + bne signal_nonyb - moveb %a3@, %d3 - cmpb %a0@+, %d3 - dbne %d1, wait_addr_mark_byte - bne wait_header_init + /* read header */ moveq #max_retry, %d2 @@ -163,30 +182,18 @@ mfm_read_data: lea %a3@(read_handshake), %a2 lea %a3@(read_data), %a5 lea %a3@(read_mark), %a3 - movew #seek_time, %d2 -wait_data_init: moveb #0x18, %a3@(write_mode0 - read_mark) moveb #0x01, %a3@(write_mode1 - read_mark) moveb #0x01, %a3@(write_mode0 - read_mark) tstb %a3@(read_error - read_mark) moveb #0x08, %a3@(write_mode1 - read_mark) - lea sector_data_mark, %a0 - moveq #3, %d1 - - /* wait data address mark */ - -wait_data_mark_byte: - - tstb %a2@ - dbmi %d2, wait_data_mark_byte - bpl data_exit - - moveb %a3@, %d3 - cmpb %a0@+, %d3 - dbne %d1, wait_data_mark_byte - bne wait_data_init + lea sector_data_mark, %a1 + moveq #.Lmark_sequence_len, %d4 + bsr .Lmfm_mark_check + tstl %d1 + bne data_exit /* read data */ -- 2.53.0