[PATCH 1/4] dt-bindings: arm64: mediatek: add mt8395-evk-ufs board

[PATCH 1/4] dt-bindings: arm64: mediatek: add mt8395-evk-ufs board

[Macpaul Lin]

Add a compatible string for the MediaTek mt8395-evk-ufs board.
This board is the origin Genio 1200 EVK already mounted two main storages,
one is eMMC, and the other is UFS. The system automatically prioritizes
between eMMC and UFS via BROM detection, so user could not use both storage
types simultaneously. As a result, mt8395-evk-ufs must be treated as a
separate board.

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
---
 Documentation/devicetree/bindings/arm/mediatek.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index a7e0a72f6e4c..cf8af943ab08 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -437,6 +437,7 @@ properties:
           - enum:
               - kontron,3-5-sbc-i1200
               - mediatek,mt8395-evk
+              - mediatek,mt8395-evk-ufs
               - radxa,nio-12l
           - const: mediatek,mt8395
           - const: mediatek,mt8195
-- 
2.45.2

[PATCH 2/4] arm64: dts: mediatek: mt8395-genio-1200-evk: Move common parts to dtsi

[Macpaul Lin]

In preparation for introducing the Genio 1200 EVK UFS board support, split
mt8395-genio-1200-evk.dts file in two to create mt8395-genio-common.dtsi
file, containing common definitions for both boards.

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
---
 .../dts/mediatek/mt8395-genio-1200-evk.dts    | 1133 +---------------
 .../dts/mediatek/mt8395-genio-common.dtsi     | 1198 +++++++++++++++++
 2 files changed, 1199 insertions(+), 1132 deletions(-)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
index be5e5f339e81..2cdefa49bf9c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -5,1141 +5,10 @@
  *	   Macpaul Lin <macpaul.lin@mediatek.com>
  */
 /dts-v1/;
-
-#include "mt8195.dtsi"
-#include "mt6359.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
-#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
-#include <dt-bindings/spmi/spmi.h>
-#include <dt-bindings/usb/pd.h>
+#include "mt8395-genio-common.dtsi"
 
 / {
 	model = "MediaTek Genio 1200 EVK-P1V2-EMMC";
 	compatible = "mediatek,mt8395-evk", "mediatek,mt8395",
 		     "mediatek,mt8195";
-
-	aliases {
-		serial0 = &uart0;
-		ethernet0 = &eth;
-	};
-
-	chosen {
-		stdout-path = "serial0:921600n8";
-	};
-
-	firmware {
-		optee {
-			compatible = "linaro,optee-tz";
-			method = "smc";
-		};
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0x2 0x00000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		/*
-		 * 12 MiB reserved for OP-TEE (BL32)
-		 * +-----------------------+ 0x43e0_0000
-		 * |      SHMEM 2MiB       |
-		 * +-----------------------+ 0x43c0_0000
-		 * |        | TA_RAM  8MiB |
-		 * + TZDRAM +--------------+ 0x4340_0000
-		 * |        | TEE_RAM 2MiB |
-		 * +-----------------------+ 0x4320_0000
-		 */
-		optee_reserved: optee@43200000 {
-			no-map;
-			reg = <0 0x43200000 0 0x00c00000>;
-		};
-
-		scp_mem: memory@50000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x50000000 0 0x2900000>;
-			no-map;
-		};
-
-		vpu_mem: memory@53000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
-		};
-
-		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
-		bl31_secmon_mem: memory@54600000 {
-			no-map;
-			reg = <0 0x54600000 0x0 0x200000>;
-		};
-
-		snd_dma_mem: memory@60000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x60000000 0 0x1100000>;
-			no-map;
-		};
-
-		apu_mem: memory@62000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
-		};
-	};
-
-	backlight_lcm0: backlight-lcm0 {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 1023>;
-		default-brightness-level = <576>;
-		num-interpolated-steps = <1023>;
-		pwms = <&disp_pwm0 0 500000>;
-	};
-
-	backlight_lcd1: backlight-lcd1 {
-		compatible = "pwm-backlight";
-		pwms = <&disp_pwm1 0 500000>;
-		enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
-		brightness-levels = <0 1023>;
-		num-interpolated-steps = <1023>;
-		default-brightness-level = <576>;
-		status = "disabled";
-	};
-
-	can_clk: can-clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <20000000>;
-		clock-output-names = "can-clk";
-	};
-
-	edp_panel_fixed_3v3: regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "edp_panel_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_panel_3v3_en_pins>;
-	};
-
-	edp_panel_fixed_12v: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "edp_backlight_12v";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		enable-active-high;
-		gpio = <&pio 96 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_panel_12v_en_pins>;
-	};
-
-	keys: gpio-keys {
-		compatible = "gpio-keys";
-
-		button-volume-up {
-			wakeup-source;
-			debounce-interval = <100>;
-			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
-			label = "volume_up";
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	lcm0_iovcc: regulator-vio18-lcm0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vio18_lcm0";
-		enable-active-high;
-		gpio = <&pio 47 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dsi0_vreg_en_pins>;
-		vin-supply = <&mt6360_ldo2>;
-	};
-
-	lcm0_vddp: regulator-vsys-lcm0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vsys_lcm0";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&mt6360_ldo1>;
-	};
-
-	wifi_fixed_3v3: regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "wifi_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-};
-
-&disp_pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&disp_pwm0_pins>;
-	status = "okay";
-};
-
-&dither0_in {
-	remote-endpoint = <&gamma0_out>;
-};
-
-&dither0_out {
-	remote-endpoint = <&dsi0_in>;
-};
-
-&dmic_codec {
-	wakeup-delay-ms = <200>;
-};
-
-&dsi0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	panel@0 {
-		compatible = "startek,kd070fhfid078", "himax,hx8279";
-		reg = <0>;
-		backlight = <&backlight_lcm0>;
-		enable-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&pio 108 GPIO_ACTIVE_HIGH>;
-		iovcc-supply = <&lcm0_iovcc>;
-		vdd-supply = <&lcm0_vddp>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_default_pins>;
-
-		port {
-			dsi_panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
-			};
-		};
-	};
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			dsi0_in: endpoint {
-				remote-endpoint = <&dither0_out>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			dsi0_out: endpoint {
-				remote-endpoint = <&dsi_panel_in>;
-			};
-		};
-	};
-};
-
-&eth {
-	phy-mode ="rgmii-rxid";
-	phy-handle = <&eth_phy0>;
-	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
-	snps,reset-delays-us = <0 10000 10000>;
-	mediatek,tx-delay-ps = <2030>;
-	mediatek,mac-wol;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&eth_default_pins>;
-	pinctrl-1 = <&eth_sleep_pins>;
-	status = "okay";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		eth_phy0: ethernet-phy@1 {
-			compatible = "ethernet-phy-id001c.c916";
-			reg = <0x1>;
-		};
-	};
-};
-
-&gamma0_out {
-	remote-endpoint = <&dither0_in>;
-};
-
-&gpu {
-	mali-supply = <&mt6315_7_vbuck1>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	touchscreen@5d {
-		compatible = "goodix,gt9271";
-		reg = <0x5d>;
-		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
-		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
-		AVDD28-supply = <&mt6360_ldo1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touch_pins>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	typec-mux@48 {
-		compatible = "ite,it5205";
-		reg = <0x48>;
-		vcc-supply = <&mt6359_vibr_ldo_reg>;
-		mode-switch;
-		orientation-switch;
-		status = "okay";
-
-		port {
-			it5205_sbu_ep: endpoint {
-				remote-endpoint = <&mt6360_ssusb_sbu_ep>;
-			};
-		};
-	};
-};
-
-&i2c6 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c6_pins>;
-	pinctrl-names = "default";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	mt6360: pmic@34 {
-		compatible = "mediatek,mt6360";
-		reg = <0x34>;
-		interrupt-parent = <&pio>;
-		interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-names = "IRQB";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		pinctrl-0 = <&mt6360_pins>;
-
-		charger {
-			compatible = "mediatek,mt6360-chg";
-			richtek,vinovp-microvolt = <14500000>;
-
-			otg_vbus_regulator: usb-otg-vbus-regulator {
-				regulator-name = "usb-otg-vbus";
-				regulator-min-microvolt = <4425000>;
-				regulator-max-microvolt = <5825000>;
-			};
-		};
-
-		regulator {
-			compatible = "mediatek,mt6360-regulator";
-			LDO_VIN3-supply = <&mt6360_buck2>;
-
-			mt6360_buck1: buck1 {
-				regulator-name = "emi_vdd2";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP
-							   MT6360_OPMODE_ULP>;
-				regulator-always-on;
-			};
-
-			mt6360_buck2: buck2 {
-				regulator-name = "emi_vddq";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP
-							   MT6360_OPMODE_ULP>;
-				regulator-always-on;
-			};
-
-			mt6360_ldo1: ldo1 {
-				regulator-name = "tp1_p3v0";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-				regulator-always-on;
-			};
-
-			mt6360_ldo2: ldo2 {
-				regulator-name = "panel1_p1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-			};
-
-			mt6360_ldo3: ldo3 {
-				regulator-name = "vmc_pmu";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-			};
-
-			mt6360_ldo5: ldo5 {
-				regulator-name = "vmch_pmu";
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-			};
-
-			/* This is a measure point, which name is mt6360_ldo1 on schematic */
-			mt6360_ldo6: ldo6 {
-				regulator-name = "mt6360_ldo1";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <2100000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-			};
-
-			mt6360_ldo7: ldo7 {
-				regulator-name = "emi_vmddr_en";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <2100000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-				regulator-always-on;
-			};
-		};
-
-		tcpc {
-			compatible = "mediatek,mt6360-tcpc";
-			interrupts-extended = <&pio 17 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-names = "PD_IRQB";
-
-			connector {
-				compatible = "usb-c-connector";
-				label = "USB-C";
-				data-role = "dual";
-				op-sink-microwatt = <10000000>;
-				power-role = "dual";
-				try-power-role = "sink";
-
-				source-pdos = <PDO_FIXED(5000, 1000,
-							 PDO_FIXED_DUAL_ROLE |
-							 PDO_FIXED_DATA_SWAP)>;
-				sink-pdos = <PDO_FIXED(5000, 2000,
-						       PDO_FIXED_DUAL_ROLE |
-						       PDO_FIXED_DATA_SWAP)>;
-
-				pd-revision = /bits/ 8 <0x03 0x01 0x01 0x06>;
-
-				altmodes {
-					displayport {
-						svid = /bits/ 16 <0xff01>;
-						vdo = <0x00001c46>;
-					};
-				};
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						typec_con_hs: endpoint {
-							remote-endpoint = <&mtu3_hs0_role_sw>;
-						};
-					};
-
-					port@1 {
-						reg = <1>;
-						typec_con_ss: endpoint {
-							remote-endpoint = <&mtu3_ss0_role_sw>;
-						};
-					};
-
-					port@2 {
-						reg = <2>;
-						mt6360_ssusb_sbu_ep: endpoint {
-							remote-endpoint = <&it5205_sbu_ep>;
-						};
-					};
-				};
-			};
-		};
-	};
-};
-
-&mfg0 {
-	domain-supply = <&mt6315_7_vbuck1>;
-};
-
-&mfg1 {
-	domain-supply = <&mt6359_vsram_others_ldo_reg>;
-};
-
-&mipi_tx0 {
-	status = "okay";
-};
-
-&mmc0 {
-	status = "okay";
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc0_default_pins>;
-	pinctrl-1 = <&mmc0_uhs_pins>;
-	bus-width = <8>;
-	max-frequency = <200000000>;
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	cap-mmc-hw-reset;
-	no-sdio;
-	no-sd;
-	hs400-ds-delay = <0x14c11>;
-	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
-	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
-	non-removable;
-};
-
-&mmc1 {
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc1_default_pins>;
-	pinctrl-1 = <&mmc1_uhs_pins>;
-	bus-width = <4>;
-	max-frequency = <200000000>;
-	cap-sd-highspeed;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	no-mmc;
-	no-sdio;
-	vmmc-supply = <&mt6360_ldo5>;
-	vqmmc-supply = <&mt6360_ldo3>;
-	status = "okay";
-	non-removable;
-};
-
-&mt6359_vaud18_ldo_reg {
-	regulator-always-on;
-};
-
-&mt6359_vbbck_ldo_reg {
-	regulator-always-on;
-};
-
-/* For USB Hub */
-&mt6359_vcamio_ldo_reg {
-	regulator-always-on;
-};
-
-&mt6359_vcn33_2_bt_ldo_reg {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-};
-
-&mt6359_vcore_buck_reg {
-	regulator-always-on;
-};
-
-&mt6359_vgpu11_buck_reg {
-	regulator-always-on;
-};
-
-&mt6359_vpu_buck_reg {
-	regulator-always-on;
-};
-
-&mt6359_vrf12_ldo_reg {
-	regulator-always-on;
-};
-
-/* for GPU SRAM */
-&mt6359_vsram_others_ldo_reg {
-	regulator-min-microvolt = <750000>;
-	regulator-max-microvolt = <750000>;
-};
-
-&mt6359codec {
-	mediatek,mic-type-0 = <1>; /* ACC */
-	mediatek,mic-type-1 = <3>; /* DCC */
-	mediatek,mic-type-2 = <1>; /* ACC */
-};
-
-&ovl0_in {
-	remote-endpoint = <&vdosys0_ep_main>;
-};
-
-&pcie0 {
-	pinctrl-names = "default", "idle";
-	pinctrl-0 = <&pcie0_default_pins>;
-	pinctrl-1 = <&pcie0_idle_pins>;
-	status = "okay";
-};
-
-&pcie1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie1_default_pins>;
-	status = "disabled";
-};
-
-&pciephy {
-	status = "okay";
-};
-
-&pio {
-	audio_default_pins: audio-default-pins {
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO61__FUNC_DMIC1_CLK>,
-				 <PINMUX_GPIO62__FUNC_DMIC1_DAT>,
-				 <PINMUX_GPIO65__FUNC_PCM_DO>,
-				 <PINMUX_GPIO66__FUNC_PCM_CLK>,
-				 <PINMUX_GPIO67__FUNC_PCM_DI>,
-				 <PINMUX_GPIO68__FUNC_PCM_SYNC>,
-				 <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
-				 <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
-				 <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
-				 <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
-				 <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
-				 <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
-				 <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>;
-		};
-	};
-
-	disp_pwm1_default_pins: disp-pwm1-default-pins {
-		pins1 {
-			pinmux = <PINMUX_GPIO104__FUNC_DISP_PWM1>;
-		};
-	};
-
-	edp_panel_12v_en_pins: edp-panel-12v-en-pins {
-		pins1 {
-			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
-			output-high;
-		};
-	};
-
-	edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
-		pins1 {
-			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
-			output-high;
-		};
-	};
-
-	eth_default_pins: eth-default-pins {
-		pins-cc {
-			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
-				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
-				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
-				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
-			drive-strength = <8>;
-		};
-
-		pins-mdio {
-			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
-				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
-			input-enable;
-		};
-
-		pins-power {
-			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
-				 <PINMUX_GPIO92__FUNC_GPIO92>;
-			output-high;
-		};
-
-		pins-rxd {
-			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
-				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
-				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
-				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
-		};
-
-		pins-txd {
-			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
-				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
-				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
-				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
-			drive-strength = <8>;
-		};
-	};
-
-	eth_sleep_pins: eth-sleep-pins {
-		pins-cc {
-			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
-				 <PINMUX_GPIO86__FUNC_GPIO86>,
-				 <PINMUX_GPIO87__FUNC_GPIO87>,
-				 <PINMUX_GPIO88__FUNC_GPIO88>;
-		};
-
-		pins-mdio {
-			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
-				 <PINMUX_GPIO90__FUNC_GPIO90>;
-			input-disable;
-			bias-disable;
-		};
-
-		pins-rxd {
-			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
-				 <PINMUX_GPIO82__FUNC_GPIO82>,
-				 <PINMUX_GPIO83__FUNC_GPIO83>,
-				 <PINMUX_GPIO84__FUNC_GPIO84>;
-		};
-
-		pins-txd {
-			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
-				 <PINMUX_GPIO78__FUNC_GPIO78>,
-				 <PINMUX_GPIO79__FUNC_GPIO79>,
-				 <PINMUX_GPIO80__FUNC_GPIO80>;
-		};
-	};
-
-	gpio_key_pins: gpio-keys-pins {
-		pins {
-			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
-			bias-pull-up;
-			input-enable;
-		};
-	};
-
-	i2c0_pins: i2c0-pins {
-		pins {
-			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
-				 <PINMUX_GPIO9__FUNC_SCL0>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
-			drive-strength-microamp = <1000>;
-		};
-	};
-
-	i2c1_pins: i2c1-pins {
-		pins {
-			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
-				 <PINMUX_GPIO11__FUNC_SCL1>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
-			drive-strength-microamp = <1000>;
-		};
-	};
-
-	i2c2_pins: i2c2-pins {
-		pins {
-			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
-				 <PINMUX_GPIO13__FUNC_SCL2>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
-			drive-strength = <6>;
-		};
-	};
-
-	i2c6_pins: i2c6-pins {
-		pins {
-			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
-				 <PINMUX_GPIO26__FUNC_SCL6>;
-			bias-pull-up;
-		};
-	};
-
-	mmc0_default_pins: mmc0-default-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <6>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
-				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
-				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
-				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
-				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
-				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
-				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
-				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
-				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
-			input-enable;
-			drive-strength = <6>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-
-		pins-rst {
-			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <6>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mmc0_uhs_pins: mmc0-uhs-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <8>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
-				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
-				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
-				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
-				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
-				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
-				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
-				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
-				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
-			input-enable;
-			drive-strength = <8>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-
-		pins-ds {
-			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
-			drive-strength = <8>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-rst {
-			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <8>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mmc1_default_pins: mmc1-default-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <8>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
-				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
-				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
-				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
-				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
-			input-enable;
-			drive-strength = <8>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mmc1_uhs_pins: mmc1-uhs-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <8>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
-				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
-				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
-				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
-				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
-			input-enable;
-			drive-strength = <8>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mt6360_pins: mt6360-pins {
-		pins {
-			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>,
-				 <PINMUX_GPIO128__FUNC_GPIO128>;
-			input-enable;
-			bias-pull-up;
-		};
-	};
-
-	dsi0_vreg_en_pins: dsi0-vreg-en-pins {
-		pins-pwr-en {
-			pinmux = <PINMUX_GPIO47__FUNC_GPIO47>;
-			output-low;
-		};
-	};
-
-	panel_default_pins: panel-default-pins {
-		pins-rst {
-			pinmux = <PINMUX_GPIO108__FUNC_GPIO108>;
-			output-high;
-		};
-
-		pins-en {
-			pinmux = <PINMUX_GPIO48__FUNC_GPIO48>;
-			output-low;
-		};
-	};
-
-	pcie0_default_pins: pcie0-default-pins {
-		pins {
-			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
-				 <PINMUX_GPIO20__FUNC_PERSTN>,
-				 <PINMUX_GPIO21__FUNC_CLKREQN>;
-			bias-pull-up;
-		};
-	};
-
-	pcie0_idle_pins: pcie0-idle-pins {
-		pins {
-			pinmux = <PINMUX_GPIO20__FUNC_GPIO20>;
-			bias-disable;
-			output-low;
-		};
-	};
-
-	pcie1_default_pins: pcie1-default-pins {
-		pins {
-			pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>,
-				 <PINMUX_GPIO23__FUNC_CLKREQN_1>,
-				 <PINMUX_GPIO24__FUNC_WAKEN_1>;
-			bias-pull-up;
-		};
-	};
-
-	disp_pwm0_pins: disp-pwm0-pins {
-		pins-disp-pwm {
-			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
-		};
-	};
-
-	spi1_pins: spi1-pins {
-		pins {
-			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
-				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
-				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
-				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
-			bias-disable;
-		};
-	};
-
-	spi2_pins: spi-pins {
-		pins {
-			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
-				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
-				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
-				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
-			bias-disable;
-		};
-	};
-
-	touch_pins: touch-pins {
-		pins-irq {
-			pinmux = <PINMUX_GPIO132__FUNC_GPIO132>;
-			input-enable;
-			bias-disable;
-		};
-
-		pins-reset {
-			pinmux = <PINMUX_GPIO133__FUNC_GPIO133>;
-			output-high;
-		};
-	};
-
-	u3_p0_vbus: u3-p0-vbus-default-pins {
-		pins-vbus {
-			pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>;
-			input-enable;
-		};
-	};
-
-	uart0_pins: uart0-pins {
-		pins {
-			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
-				 <PINMUX_GPIO99__FUNC_URXD0>;
-		};
-	};
-
-	uart1_pins: uart1-pins {
-		pins {
-			pinmux = <PINMUX_GPIO100__FUNC_URTS1>,
-				 <PINMUX_GPIO101__FUNC_UCTS1>,
-				 <PINMUX_GPIO102__FUNC_UTXD1>,
-				 <PINMUX_GPIO103__FUNC_URXD1>;
-		};
-	};
-};
-
-&pmic {
-	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&scp {
-	memory-region = <&scp_mem>;
-	firmware-name = "mediatek/mt8195/scp.img";
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-0 = <&spi1_pins>;
-	pinctrl-names = "default";
-	mediatek,pad-select = <0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-	cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>;
-
-	can0: can@0 {
-		compatible = "microchip,mcp2518fd";
-		reg = <0>;
-		clocks = <&can_clk>;
-		spi-max-frequency = <20000000>;
-		interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
-		xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
-	};
-};
-
-&spi2 {
-	pinctrl-0 = <&spi2_pins>;
-	pinctrl-names = "default";
-	mediatek,pad-select = <0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-};
-
-&spmi {
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	mt6315_6: pmic@6 {
-		compatible = "mediatek,mt6315-regulator";
-		reg = <0x6 SPMI_USID>;
-
-		regulators {
-			mt6315_6_vbuck1: vbuck1 {
-				regulator-name = "Vbcpu";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1193750>;
-				regulator-enable-ramp-delay = <256>;
-				regulator-allowed-modes = <0 1 2>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	mt6315_7: pmic@7 {
-		compatible = "mediatek,mt6315-regulator";
-		reg = <0x7 SPMI_USID>;
-
-		regulators {
-			mt6315_7_vbuck1: vbuck1 {
-				regulator-name = "Vgpu";
-				regulator-min-microvolt = <546000>;
-				regulator-max-microvolt = <787000>;
-				regulator-enable-ramp-delay = <256>;
-				regulator-allowed-modes = <0 1 2>;
-			};
-		};
-	};
-};
-
-&u3phy0 {
-	status = "okay";
-};
-
-&u3phy1 {
-	status = "okay";
-
-	u3port1: usb-phy@700 {
-		mediatek,force-mode;
-	};
-};
-
-&u3phy2 {
-	status = "okay";
-};
-
-&u3phy3 {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-0 = <&uart1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&ufsphy {
-	status = "disabled";
-};
-
-&ssusb0 {
-	dr_mode = "otg";
-	pinctrl-names = "default";
-	pinctrl-0 = <&u3_p0_vbus>;
-	usb-role-switch;
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			mtu3_hs0_role_sw: endpoint {
-				remote-endpoint = <&typec_con_hs>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			mtu3_ss0_role_sw: endpoint {
-				remote-endpoint = <&typec_con_ss>;
-			};
-		};
-	};
-};
-
-&ssusb2 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-	status = "okay";
-};
-
-&ssusb3 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-	status = "okay";
-};
-
-&vdosys0 {
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdosys0_ep_main: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&ovl0_in>;
-		};
-	};
-};
-
-&xhci0 {
-	status = "okay";
-};
-
-&xhci1 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-	status = "okay";
-};
-
-&xhci2 {
-	status = "okay";
-};
-
-&xhci3 {
-	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi
new file mode 100644
index 000000000000..3b679626e8a1
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi
@@ -0,0 +1,1198 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Ben Lok <ben.lok@mediatek.com>
+ *	   Macpaul Lin <macpaul.lin@mediatek.com>
+ */
+/dts-v1/;
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &eth;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x2 0x00000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+
+	backlight_lcm0: backlight-lcm0 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		num-interpolated-steps = <1023>;
+		pwms = <&disp_pwm0 0 500000>;
+	};
+
+	backlight_lcd1: backlight-lcd1 {
+		compatible = "pwm-backlight";
+		pwms = <&disp_pwm1 0 500000>;
+		enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 1023>;
+		num-interpolated-steps = <1023>;
+		default-brightness-level = <576>;
+		status = "disabled";
+	};
+
+	can_clk: can-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+		clock-output-names = "can-clk";
+	};
+
+	edp_panel_fixed_3v3: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "edp_panel_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_3v3_en_pins>;
+	};
+
+	edp_panel_fixed_12v: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "edp_backlight_12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		gpio = <&pio 96 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_12v_en_pins>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-volume-up {
+			wakeup-source;
+			debounce-interval = <100>;
+			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	lcm0_iovcc: regulator-vio18-lcm0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio18_lcm0";
+		enable-active-high;
+		gpio = <&pio 47 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsi0_vreg_en_pins>;
+		vin-supply = <&mt6360_ldo2>;
+	};
+
+	lcm0_vddp: regulator-vsys-lcm0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_lcm0";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&mt6360_ldo1>;
+	};
+
+	wifi_fixed_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wifi_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
+&disp_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pins>;
+	status = "okay";
+};
+
+&dither0_in {
+	remote-endpoint = <&gamma0_out>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&dmic_codec {
+	wakeup-delay-ms = <200>;
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "startek,kd070fhfid078", "himax,hx8279";
+		reg = <0>;
+		backlight = <&backlight_lcm0>;
+		enable-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 108 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&lcm0_iovcc>;
+		vdd-supply = <&lcm0_vddp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+};
+
+&eth {
+	phy-mode ="rgmii-rxid";
+	phy-handle = <&eth_phy0>;
+	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 10000 10000>;
+	mediatek,tx-delay-ps = <2030>;
+	mediatek,mac-wol;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		eth_phy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <0x1>;
+		};
+	};
+};
+
+&gamma0_out {
+	remote-endpoint = <&dither0_in>;
+};
+
+&gpu {
+	mali-supply = <&mt6315_7_vbuck1>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&mt6360_ldo1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	typec-mux@48 {
+		compatible = "ite,it5205";
+		reg = <0x48>;
+		vcc-supply = <&mt6359_vibr_ldo_reg>;
+		mode-switch;
+		orientation-switch;
+		status = "okay";
+
+		port {
+			it5205_sbu_ep: endpoint {
+				remote-endpoint = <&mt6360_ssusb_sbu_ep>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mt6360: pmic@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupt-parent = <&pio>;
+		interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		pinctrl-0 = <&mt6360_pins>;
+
+		charger {
+			compatible = "mediatek,mt6360-chg";
+			richtek,vinovp-microvolt = <14500000>;
+
+			otg_vbus_regulator: usb-otg-vbus-regulator {
+				regulator-name = "usb-otg-vbus";
+				regulator-min-microvolt = <4425000>;
+				regulator-max-microvolt = <5825000>;
+			};
+		};
+
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN3-supply = <&mt6360_buck2>;
+
+			mt6360_buck1: buck1 {
+				regulator-name = "emi_vdd2";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_buck2: buck2 {
+				regulator-name = "emi_vddq";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo1: ldo1 {
+				regulator-name = "tp1_p3v0";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo2: ldo2 {
+				regulator-name = "panel1_p1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo3: ldo3 {
+				regulator-name = "vmc_pmu";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo5: ldo5 {
+				regulator-name = "vmch_pmu";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			/* This is a measure point, which name is mt6360_ldo1 on schematic */
+			mt6360_ldo6: ldo6 {
+				regulator-name = "mt6360_ldo1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo7: ldo7 {
+				regulator-name = "emi_vmddr_en";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+		};
+
+		tcpc {
+			compatible = "mediatek,mt6360-tcpc";
+			interrupts-extended = <&pio 17 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "PD_IRQB";
+
+			connector {
+				compatible = "usb-c-connector";
+				label = "USB-C";
+				data-role = "dual";
+				op-sink-microwatt = <10000000>;
+				power-role = "dual";
+				try-power-role = "sink";
+
+				source-pdos = <PDO_FIXED(5000, 1000,
+							 PDO_FIXED_DUAL_ROLE |
+							 PDO_FIXED_DATA_SWAP)>;
+				sink-pdos = <PDO_FIXED(5000, 2000,
+						       PDO_FIXED_DUAL_ROLE |
+						       PDO_FIXED_DATA_SWAP)>;
+
+				pd-revision = /bits/ 8 <0x03 0x01 0x01 0x06>;
+
+				altmodes {
+					displayport {
+						svid = /bits/ 16 <0xff01>;
+						vdo = <0x00001c46>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						typec_con_hs: endpoint {
+							remote-endpoint = <&mtu3_hs0_role_sw>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						typec_con_ss: endpoint {
+							remote-endpoint = <&mtu3_ss0_role_sw>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						mt6360_ssusb_sbu_ep: endpoint {
+							remote-endpoint = <&it5205_sbu_ep>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x14c11>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	no-mmc;
+	no-sdio;
+	vmmc-supply = <&mt6360_ldo5>;
+	vqmmc-supply = <&mt6360_ldo3>;
+	status = "okay";
+	non-removable;
+};
+
+&mt6359_vaud18_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+/* For USB Hub */
+&mt6359_vcamio_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+/* for GPU SRAM */
+&mt6359_vsram_others_ldo_reg {
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <750000>;
+};
+
+&mt6359codec {
+	mediatek,mic-type-0 = <1>; /* ACC */
+	mediatek,mic-type-1 = <3>; /* DCC */
+	mediatek,mic-type-2 = <1>; /* ACC */
+};
+
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
+&pcie0 {
+	pinctrl-names = "default", "idle";
+	pinctrl-0 = <&pcie0_default_pins>;
+	pinctrl-1 = <&pcie0_idle_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_pins>;
+	status = "disabled";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio {
+	audio_default_pins: audio-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO61__FUNC_DMIC1_CLK>,
+				 <PINMUX_GPIO62__FUNC_DMIC1_DAT>,
+				 <PINMUX_GPIO65__FUNC_PCM_DO>,
+				 <PINMUX_GPIO66__FUNC_PCM_CLK>,
+				 <PINMUX_GPIO67__FUNC_PCM_DI>,
+				 <PINMUX_GPIO68__FUNC_PCM_SYNC>,
+				 <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
+				 <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>;
+		};
+	};
+
+	disp_pwm1_default_pins: disp-pwm1-default-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO104__FUNC_DISP_PWM1>;
+		};
+	};
+
+	edp_panel_12v_en_pins: edp-panel-12v-en-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
+			output-high;
+		};
+	};
+
+	edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			output-high;
+		};
+	};
+
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			input-disable;
+			bias-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+	};
+
+	gpio_key_pins: gpio-keys-pins {
+		pins {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+				 <PINMUX_GPIO9__FUNC_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
+				 <PINMUX_GPIO11__FUNC_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+				 <PINMUX_GPIO13__FUNC_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength = <6>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mt6360_pins: mt6360-pins {
+		pins {
+			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>,
+				 <PINMUX_GPIO128__FUNC_GPIO128>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	dsi0_vreg_en_pins: dsi0-vreg-en-pins {
+		pins-pwr-en {
+			pinmux = <PINMUX_GPIO47__FUNC_GPIO47>;
+			output-low;
+		};
+	};
+
+	panel_default_pins: panel-default-pins {
+		pins-rst {
+			pinmux = <PINMUX_GPIO108__FUNC_GPIO108>;
+			output-high;
+		};
+
+		pins-en {
+			pinmux = <PINMUX_GPIO48__FUNC_GPIO48>;
+			output-low;
+		};
+	};
+
+	pcie0_default_pins: pcie0-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_idle_pins: pcie0-idle-pins {
+		pins {
+			pinmux = <PINMUX_GPIO20__FUNC_GPIO20>;
+			bias-disable;
+			output-low;
+		};
+	};
+
+	pcie1_default_pins: pcie1-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO23__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO24__FUNC_WAKEN_1>;
+			bias-pull-up;
+		};
+	};
+
+	disp_pwm0_pins: disp-pwm0-pins {
+		pins-disp-pwm {
+			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
+				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
+				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
+				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi-pins {
+		pins {
+			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
+				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
+				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
+				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
+			bias-disable;
+		};
+	};
+
+	touch_pins: touch-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO132__FUNC_GPIO132>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO133__FUNC_GPIO133>;
+			output-high;
+		};
+	};
+
+	u3_p0_vbus: u3-p0-vbus-default-pins {
+		pins-vbus {
+			pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>;
+			input-enable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+				 <PINMUX_GPIO99__FUNC_URXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO100__FUNC_URTS1>,
+				 <PINMUX_GPIO101__FUNC_UCTS1>,
+				 <PINMUX_GPIO102__FUNC_UTXD1>,
+				 <PINMUX_GPIO103__FUNC_URXD1>;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6359keys: keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		home {
+			linux,keycodes = <KEY_HOME>;
+		};
+	};
+};
+
+&scp {
+	memory-region = <&scp_mem>;
+	firmware-name = "mediatek/mt8195/scp.img";
+	status = "okay";
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359";
+	model = "mt8395-evk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_default_pins>;
+	audio-routing =
+		"Headphone", "Headphone L",
+		"Headphone", "Headphone R";
+	mediatek,adsp = <&adsp>;
+	status = "okay";
+
+	headphone-dai-link {
+		link-name = "DL_SRC_BE";
+
+		codec {
+			sound-dai = <&pmic 0>;
+		};
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>;
+
+	can0: can@0 {
+		compatible = "microchip,mcp2518fd";
+		reg = <0>;
+		clocks = <&can_clk>;
+		spi-max-frequency = <20000000>;
+		interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+		xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+	};
+};
+
+&spi2 {
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315_6: pmic@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315_7: pmic@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <546000>;
+				regulator-max-microvolt = <787000>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+
+	u3port1: usb-phy@700 {
+		mediatek,force-mode;
+	};
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&u3phy3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ufsphy {
+	status = "disabled";
+};
+
+&ssusb0 {
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&u3_p0_vbus>;
+	usb-role-switch;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			mtu3_hs0_role_sw: endpoint {
+				remote-endpoint = <&typec_con_hs>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			mtu3_ss0_role_sw: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+};
+
+&ssusb2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci2 {
+	status = "okay";
+};
+
+&xhci3 {
+	status = "okay";
+};
-- 
2.45.2

[PATCH 3/4] arm64: dts: mediatek: add device-tree for Genio 1200 EVK UFS board

[Macpaul Lin]

Add a basic device-tree (mt8395-genio-1200-evk-ufs.dts) in order to be able
to use UFS storage as the main storage on Genio 1200 EVK board.

This board is the origin Genio 1200 EVK already mounted two main storages,
one is eMMC, and the other is UFS. The system automatically prioritizes
between eMMC and UFS via BROM detection, so user could not use both storage
types simultaneously. As a result, mt8395-evk-ufs must be treated as a
separate board.

It use mt8395-genio-common.dtsi file to use common definitions.

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/Makefile         |  1 +
 .../mediatek/mt8395-genio-1200-evk-ufs.dts    | 28 +++++++++++++++++++
 2 files changed, 29 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk-ufs.dts

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index f68865d06edd..c34ca7ae3155 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-genio-510-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk-ufs.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-kontron-3-5-sbc-i1200.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk-ufs.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk-ufs.dts
new file mode 100644
index 000000000000..f362097489a2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk-ufs.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Ramax Lo <ramax.lo@mediatek.com>
+ *         Macpaul Lin <macpaul.lin@mediatek.com>
+ */
+/dts-v1/;
+#include "mt8395-genio-common.dtsi"
+
+&ufshci {
+	status = "okay";
+	vcc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vccq2-supply = <&mt6359_vufs_ldo_reg>;
+};
+
+&ufsphy {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "disabled";
+};
+
+/ {
+	model = "MediaTek Genio 1200 EVK-P1V2-UFS";
+	compatible = "mediatek,mt8395-evk-ufs", "mediatek,mt8395",
+		     "mediatek,mt8195";
+};
-- 
2.45.2

[PATCH 4/4] arm64: defconfig: Enable UFS support for MediaTek Genio 1200 EVK UFS board

[Macpaul Lin]

Enable the UFS related settings to support Genio 1200 EVK UFS board.
This board uses UFS as the boot device and also the main storage.
This includes support for:
 - CONFIG_PHY_MTK_UFS
 - CONFIG_SCSI_UFS_MEDIATEK

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
---
 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 7e04a2905ce4..c7ca08ed1bf1 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1208,6 +1208,7 @@ CONFIG_SCSI_UFS_BSG=y
 CONFIG_SCSI_UFSHCD_PLATFORM=y
 CONFIG_SCSI_UFS_CDNS_PLATFORM=m
 CONFIG_SCSI_UFS_QCOM=m
+CONFIG_SCSI_UFS_MEDIATEK=m
 CONFIG_SCSI_UFS_HISI=y
 CONFIG_SCSI_UFS_RENESAS=m
 CONFIG_SCSI_UFS_TI_J721E=m
@@ -1591,6 +1592,7 @@ CONFIG_PHY_HISI_INNO_USB2=y
 CONFIG_PHY_MVEBU_CP110_COMPHY=y
 CONFIG_PHY_MTK_PCIE=m
 CONFIG_PHY_MTK_TPHY=y
+CONFIG_PHY_MTK_UFS=m
 CONFIG_PHY_MTK_HDMI=m
 CONFIG_PHY_MTK_MIPI_DSI=m
 CONFIG_PHY_MTK_DP=m
-- 
2.45.2

Re: [PATCH 4/4] arm64: defconfig: Enable UFS support for MediaTek Genio 1200 EVK UFS board

[kernel test robot]

Hi,

Thanks for your patch.

FYI: kernel test robot notices the stable kernel rule is not satisfied.

The check is based on https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html#option-1

Rule: add the tag "Cc: stable@vger.kernel.org" in the sign-off area to have the patch automatically included in the stable tree.
Subject: [PATCH 4/4] arm64: defconfig: Enable UFS support for MediaTek Genio 1200 EVK UFS board
Link: https://lore.kernel.org/stable/20250718083202.654568-4-macpaul.lin%40mediatek.com

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Re: [PATCH 2/4] arm64: dts: mediatek: mt8395-genio-1200-evk: Move common parts to dtsi

[Krzysztof Kozlowski]

On 18/07/2025 10:32, Macpaul Lin wrote:
> In preparation for introducing the Genio 1200 EVK UFS board support, split
> mt8395-genio-1200-evk.dts file in two to create mt8395-genio-common.dtsi
> file, containing common definitions for both boards.
> 
> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
> ---
>  .../dts/mediatek/mt8395-genio-1200-evk.dts    | 1133 +---------------
>  .../dts/mediatek/mt8395-genio-common.dtsi     | 1198 +++++++++++++++++
>  2 files changed, 1199 insertions(+), 1132 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi
> 

This is impossible to review. Use proper -M/-C/-B arguments for
format-patch.

Best regards,
Krzysztof

Re: [PATCH 3/4] arm64: dts: mediatek: add device-tree for Genio 1200 EVK UFS board

[Krzysztof Kozlowski]

On 18/07/2025 10:32, Macpaul Lin wrote:
> +
> +&mmc0 {
> +	status = "disabled";
> +};
> +
> +/ {

Root node is ALWAYS the first. Don't come with some other rules.

> +	model = "MediaTek Genio 1200 EVK-P1V2-UFS";
> +	compatible = "mediatek,mt8395-evk-ufs", "mediatek,mt8395",
> +		     "mediatek,mt8195";
> +};


Best regards,
Krzysztof

Re: [PATCH 3/4] arm64: dts: mediatek: add device-tree for Genio 1200 EVK UFS board

[kernel test robot]

Hi Macpaul,

kernel test robot noticed the following build errors:

[auto build test ERROR on robh/for-next]
[also build test ERROR on arm64/for-next/core krzk/for-next linus/master v6.16-rc6]
[cannot apply to next-20250718]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Macpaul-Lin/arm64-dts-mediatek-mt8395-genio-1200-evk-Move-common-parts-to-dtsi/20250718-163459
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20250718083202.654568-3-macpaul.lin%40mediatek.com
patch subject: [PATCH 3/4] arm64: dts: mediatek: add device-tree for Genio 1200 EVK UFS board
config: arm64-randconfig-001-20250719 (https://download.01.org/0day-ci/archive/20250719/202507191640.Ghk47rXu-lkp@intel.com/config)
compiler: clang version 20.1.8 (https://github.com/llvm/llvm-project 87f0227cb60147a26a1eeb4fb06e3b505e9c7261)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250719/202507191640.Ghk47rXu-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202507191640.Ghk47rXu-lkp@intel.com/

All errors (new ones prefixed by >>):

>> Error: arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk-ufs.dts:10.1-8 Label or path ufshci not found
   FATAL ERROR: Syntax error parsing input tree

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki