Re: [PATCH v3 1/2] platform/x86: int3472: add hpd pin support

["Yan, Dongcheng" <dongcheng.yan@linux.intel.com>]

Hi reviewers,

I'm sorry for that I forget to rm cc:stable@vger.kernel.org in maillist

Best Regards,
Dongcheng

On 4/25/2025 6:43 PM, Dongcheng Yan wrote:
> Typically HDMI to MIPI CSI-2 bridges have a pin to signal image data is
> being received. On the host side this is wired to a GPIO for polling or
> interrupts. This includes the Lontium HDMI to MIPI CSI-2 bridges
> lt6911uxe and lt6911uxc.
> 
> The GPIO "hpd" is used already by other HDMI to CSI-2 bridges, use it
> here as well.
> 
> Signed-off-by: Dongcheng Yan <dongcheng.yan@intel.com>
> ---
>  drivers/platform/x86/intel/int3472/common.h   | 1 +
>  drivers/platform/x86/intel/int3472/discrete.c | 6 ++++++
>  2 files changed, 7 insertions(+)
> 
> diff --git a/drivers/platform/x86/intel/int3472/common.h b/drivers/platform/x86/intel/int3472/common.h
> index 51b818e62a25..4593d567caf4 100644
> --- a/drivers/platform/x86/intel/int3472/common.h
> +++ b/drivers/platform/x86/intel/int3472/common.h
> @@ -23,6 +23,7 @@
>  #define INT3472_GPIO_TYPE_CLK_ENABLE				0x0c
>  #define INT3472_GPIO_TYPE_PRIVACY_LED				0x0d
>  #define INT3472_GPIO_TYPE_HANDSHAKE				0x12
> +#define INT3472_GPIO_TYPE_HOTPLUG_DETECT			0x13
>  
>  #define INT3472_PDEV_MAX_NAME_LEN				23
>  #define INT3472_MAX_SENSOR_GPIOS				3
> diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
> index 394975f55d64..efa3bc7af193 100644
> --- a/drivers/platform/x86/intel/int3472/discrete.c
> +++ b/drivers/platform/x86/intel/int3472/discrete.c
> @@ -191,6 +191,10 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3
>  		*con_id = "privacy-led";
>  		*gpio_flags = GPIO_ACTIVE_HIGH;
>  		break;
> +	case INT3472_GPIO_TYPE_HOTPLUG_DETECT:
> +		*con_id = "hpd";
> +		*gpio_flags = GPIO_ACTIVE_HIGH;
> +		break;
>  	case INT3472_GPIO_TYPE_POWER_ENABLE:
>  		*con_id = "avdd";
>  		*gpio_flags = GPIO_ACTIVE_HIGH;
> @@ -221,6 +225,7 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3
>   * 0x0b Power enable
>   * 0x0c Clock enable
>   * 0x0d Privacy LED
> + * 0x13 Hotplug detect
>   *
>   * There are some known platform specific quirks where that does not quite
>   * hold up; for example where a pin with type 0x01 (Power down) is mapped to
> @@ -290,6 +295,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
>  	switch (type) {
>  	case INT3472_GPIO_TYPE_RESET:
>  	case INT3472_GPIO_TYPE_POWERDOWN:
> +	case INT3472_GPIO_TYPE_HOTPLUG_DETECT:
>  		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, con_id, gpio_flags);
>  		if (ret)
>  			err_msg = "Failed to map GPIO pin to sensor\n";
> 
> base-commit: 4d1e8c8f11c611db5828e4bae7292bc295eea8ef