* [PATCH] USB: ohci-at91: add a reset function to fix race condition
@ 2012-05-09 8:48 Nicolas Ferre
2012-05-09 17:22 ` Sergei Shtylyov
2012-05-09 17:45 ` Alan Stern
0 siblings, 2 replies; 4+ messages in thread
From: Nicolas Ferre @ 2012-05-09 8:48 UTC (permalink / raw)
To: stern, linux-usb
Cc: linux-arm-kernel, linux-kernel, plagnioj, gregkh, Nicolas Ferre,
stable
A possible race condition appears because we are not initializing
the ohci->regs before calling usb_hcd_request_irqs().
We move the call to ohci_init() in hcd->driver->reset() instead of
hcd->driver->start() to fix this.
This was experienced when we share the same IRQ line between OHCI and EHCI
controllers.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Christian Eggers <christian.eggers@kathrein.de>
Cc: stable <stable@vger.kernel.org>
---
drivers/usb/host/ohci-at91.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 13ebeca..55d3d64 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -223,7 +223,7 @@ static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd,
/*-------------------------------------------------------------------------*/
static int __devinit
-ohci_at91_start (struct usb_hcd *hcd)
+ohci_at91_reset (struct usb_hcd *hcd)
{
struct at91_usbh_data *board = hcd->self.controller->platform_data;
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
@@ -233,6 +233,14 @@ ohci_at91_start (struct usb_hcd *hcd)
return ret;
ohci->num_ports = board->ports;
+ return 0;
+}
+
+static int __devinit
+ohci_at91_start (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ int ret;
if ((ret = ohci_run(ohci)) < 0) {
err("can't start %s", hcd->self.bus_name);
@@ -418,6 +426,7 @@ static const struct hc_driver ohci_at91_hc_driver = {
/*
* basic lifecycle operations
*/
+ .reset = ohci_at91_reset,
.start = ohci_at91_start,
.stop = ohci_stop,
.shutdown = ohci_shutdown,
--
1.7.10
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] USB: ohci-at91: add a reset function to fix race condition
2012-05-09 8:48 [PATCH] USB: ohci-at91: add a reset function to fix race condition Nicolas Ferre
@ 2012-05-09 17:22 ` Sergei Shtylyov
2012-05-10 7:38 ` Nicolas Ferre
2012-05-09 17:45 ` Alan Stern
1 sibling, 1 reply; 4+ messages in thread
From: Sergei Shtylyov @ 2012-05-09 17:22 UTC (permalink / raw)
To: Nicolas Ferre
Cc: stern, linux-usb, linux-arm-kernel, linux-kernel, plagnioj,
gregkh, stable
Hello.
On 09-05-2012 12:48, Nicolas Ferre wrote:
> A possible race condition appears because we are not initializing
> the ohci->regs before calling usb_hcd_request_irqs().
> We move the call to ohci_init() in hcd->driver->reset() instead of
> hcd->driver->start() to fix this.
> This was experienced when we share the same IRQ line between OHCI and EHCI
> controllers.
> Signed-off-by: Nicolas Ferre<nicolas.ferre@atmel.com>
> Tested-by: Christian Eggers<christian.eggers@kathrein.de>
> Cc: stable<stable@vger.kernel.org>
> ---
> drivers/usb/host/ohci-at91.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
> index 13ebeca..55d3d64 100644
> --- a/drivers/usb/host/ohci-at91.c
> +++ b/drivers/usb/host/ohci-at91.c
> @@ -223,7 +223,7 @@ static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd,
> /*-------------------------------------------------------------------------*/
>
> static int __devinit
> -ohci_at91_start (struct usb_hcd *hcd)
> +ohci_at91_reset (struct usb_hcd *hcd)
Have you run the patch thru scripts/checkpatch.pl? There should be no
space between function name and '('.
> {
> struct at91_usbh_data *board = hcd->self.controller->platform_data;
> struct ohci_hcd *ohci = hcd_to_ohci (hcd);
> @@ -233,6 +233,14 @@ ohci_at91_start (struct usb_hcd *hcd)
> return ret;
>
> ohci->num_ports = board->ports;
> + return 0;
> +}
> +
> +static int __devinit
> +ohci_at91_start (struct usb_hcd *hcd)
Same here.
> +{
> + struct ohci_hcd *ohci = hcd_to_ohci (hcd);
And here.
WBR, Sergei
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] USB: ohci-at91: add a reset function to fix race condition
2012-05-09 8:48 [PATCH] USB: ohci-at91: add a reset function to fix race condition Nicolas Ferre
2012-05-09 17:22 ` Sergei Shtylyov
@ 2012-05-09 17:45 ` Alan Stern
1 sibling, 0 replies; 4+ messages in thread
From: Alan Stern @ 2012-05-09 17:45 UTC (permalink / raw)
To: Nicolas Ferre
Cc: linux-usb, linux-arm-kernel, linux-kernel, plagnioj, gregkh,
stable
On Wed, 9 May 2012, Nicolas Ferre wrote:
> A possible race condition appears because we are not initializing
> the ohci->regs before calling usb_hcd_request_irqs().
> We move the call to ohci_init() in hcd->driver->reset() instead of
> hcd->driver->start() to fix this.
> This was experienced when we share the same IRQ line between OHCI and EHCI
> controllers.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> Tested-by: Christian Eggers <christian.eggers@kathrein.de>
> Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
> ---
> drivers/usb/host/ohci-at91.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
> index 13ebeca..55d3d64 100644
> --- a/drivers/usb/host/ohci-at91.c
> +++ b/drivers/usb/host/ohci-at91.c
> @@ -223,7 +223,7 @@ static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd,
> /*-------------------------------------------------------------------------*/
>
> static int __devinit
> -ohci_at91_start (struct usb_hcd *hcd)
> +ohci_at91_reset (struct usb_hcd *hcd)
> {
> struct at91_usbh_data *board = hcd->self.controller->platform_data;
> struct ohci_hcd *ohci = hcd_to_ohci (hcd);
> @@ -233,6 +233,14 @@ ohci_at91_start (struct usb_hcd *hcd)
> return ret;
>
> ohci->num_ports = board->ports;
> + return 0;
> +}
> +
> +static int __devinit
> +ohci_at91_start (struct usb_hcd *hcd)
> +{
> + struct ohci_hcd *ohci = hcd_to_ohci (hcd);
> + int ret;
>
> if ((ret = ohci_run(ohci)) < 0) {
> err("can't start %s", hcd->self.bus_name);
> @@ -418,6 +426,7 @@ static const struct hc_driver ohci_at91_hc_driver = {
> /*
> * basic lifecycle operations
> */
> + .reset = ohci_at91_reset,
> .start = ohci_at91_start,
> .stop = ohci_stop,
> .shutdown = ohci_shutdown,
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] USB: ohci-at91: add a reset function to fix race condition
2012-05-09 17:22 ` Sergei Shtylyov
@ 2012-05-10 7:38 ` Nicolas Ferre
0 siblings, 0 replies; 4+ messages in thread
From: Nicolas Ferre @ 2012-05-10 7:38 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: stern, linux-usb, linux-arm-kernel, linux-kernel, plagnioj,
gregkh, stable
On 05/09/2012 07:22 PM, Sergei Shtylyov :
> Hello.
>
> On 09-05-2012 12:48, Nicolas Ferre wrote:
>
>> A possible race condition appears because we are not initializing
>> the ohci->regs before calling usb_hcd_request_irqs().
>> We move the call to ohci_init() in hcd->driver->reset() instead of
>> hcd->driver->start() to fix this.
>> This was experienced when we share the same IRQ line between OHCI and
>> EHCI
>> controllers.
>
>> Signed-off-by: Nicolas Ferre<nicolas.ferre@atmel.com>
>> Tested-by: Christian Eggers<christian.eggers@kathrein.de>
>> Cc: stable<stable@vger.kernel.org>
>> ---
>> drivers/usb/host/ohci-at91.c | 11 ++++++++++-
>> 1 file changed, 10 insertions(+), 1 deletion(-)
>
>> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
>> index 13ebeca..55d3d64 100644
>> --- a/drivers/usb/host/ohci-at91.c
>> +++ b/drivers/usb/host/ohci-at91.c
>> @@ -223,7 +223,7 @@ static void __devexit usb_hcd_at91_remove(struct
>> usb_hcd *hcd,
>>
>> /*-------------------------------------------------------------------------*/
>>
>>
>> static int __devinit
>> -ohci_at91_start (struct usb_hcd *hcd)
>> +ohci_at91_reset (struct usb_hcd *hcd)
>
> Have you run the patch thru scripts/checkpatch.pl? There should be no
> space between function name and '('.
>
>> {
>> struct at91_usbh_data *board =
>> hcd->self.controller->platform_data;
>> struct ohci_hcd *ohci = hcd_to_ohci (hcd);
>> @@ -233,6 +233,14 @@ ohci_at91_start (struct usb_hcd *hcd)
>> return ret;
>>
>> ohci->num_ports = board->ports;
>> + return 0;
>> +}
>> +
>> +static int __devinit
>> +ohci_at91_start (struct usb_hcd *hcd)
>
> Same here.
>
>> +{
>> + struct ohci_hcd *ohci = hcd_to_ohci (hcd);
>
> And here.
Yes, I have run checkpatch.pl. But I also know that I have to conform to
existing code and the history of the file that I am touching.
This file is using this convention as well as
drivers/usb/host/ohci-hcd.c and several others dealing with USB. So I
kept this style in my patch.
Best regards,
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-05-10 7:38 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-05-09 8:48 [PATCH] USB: ohci-at91: add a reset function to fix race condition Nicolas Ferre
2012-05-09 17:22 ` Sergei Shtylyov
2012-05-10 7:38 ` Nicolas Ferre
2012-05-09 17:45 ` Alan Stern
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).