From: Andres Bertens <abertensu@yahoo.com>
To: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org, johannes.berg@intel.com, wujianguo@huawei.com
Subject: 3.4.84-stable review: iwlwifi module fails with an Intel 6205
Date: Fri, 21 Mar 2014 16:28:20 -0300 [thread overview]
Message-ID: <532C92D4.6070200@yahoo.com> (raw)
Hello,
Same as reported with 3.4.83 release, 3.4.84-rc1 also makes my wifi
network card stop working:
iwlwifi 0000:03:00.0: Failed to run INIT ucode: -110
iwlwifi 0000:03:00.0: Unable to initialize device.
My laptop is a Lenovo Thinkpad X230 with an Intel Corporation Centrino
Advanced-N 6205 [Taylor Peak] (rev 34). Another user also reported same
problem with an Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
As a workaround, reverting patch from release 3.4.83:
Johannes Berg <johannes.berg@intel.com>
iwlwifi: always copy first 16 bytes of commands
makes it work again.
Saludos,
Andres Bertens
PS
If of any interest, here are related logs.
Linux mintaka 3.4.84-rc1 #1 SMP Fri Mar 21 15:38:25 CLST 2014 x86_64
x86_64 x86_64 GNU/Linux
Device not working (without reverting patch)
============================================
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = ffffc90006658000
iwlwifi 0000:03:00.0: HW Revision ID = 0x34
iwlwifi 0000:03:00.0: irq 42 for MSI/MSI-X
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN,
REV=0xB0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0x1F0
iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Error sending CALIBRATION_CFG_CMD: time out after
2000ms.
iwlwifi 0000:03:00.0: Current CMD queue read_ptr 2 write_ptr 3
iwlwifi 0000:03:00.0: Failing on timeout while stopping DMA channel 7
[0x077f0001]
iwlwifi 0000:03:00.0: Failed to run INIT ucode: -110
iwlwifi 0000:03:00.0: Unable to initialize device.
Device working (patch reverted)
================================
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = ffffc90006610000
iwlwifi 0000:03:00.0: HW Revision ID = 0x34
iwlwifi 0000:03:00.0: irq 44 for MSI/MSI-X
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN,
REV=0xB0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0x1F0
iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
reply other threads:[~2014-03-21 19:28 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=532C92D4.6070200@yahoo.com \
--to=abertensu@yahoo.com \
--cc=johannes.berg@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=wujianguo@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).