Re: [PATCH V3 1/7] Drivers: scsi: storvsc: Change the limits to reflect the values on the host

[Hannes Reinecke <hare@suse.de>]

On 07/14/2014 10:30 AM, Christoph Hellwig wrote:
> On Mon, Jul 14, 2014 at 08:15:17AM +0200, Hannes Reinecke wrote:
>> Limiting max_lun to 255 will make the driver to _not_ respond to LUNs higher
>> than that; ie Well-known LUN won't work here.
>> Also the SCSI stack will be using REPORT LUNS anyway since you're
>> advertising SPC-2 compliance. So your driver runs into issues if Hyper-V
>> would ever return more than 256 LUNs with the REPORT LUN command or if any
>> of the LUNs has an addressing scheme other than
>> '0x00'.
>> I would suggest to raise this to the technical limit (ie the largest LUN
>> which the _protocol_ supports) and let REPORT LUNS deal with the actual
>> LUNs.
>
> I suspect hypverv doesn't support anything more.  For now I'd be
> inclined to just put it in ASAP and if your suggestion works out fix it
> up later, although I'll wait a bit for more review feedback.
>
Okay, that's fine by me.

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		      zSeries & Storage
hare@suse.de			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N�rnberg
GF: J. Hawn, J. Guild, F. Imend�rffer, HRB 16746 (AG N�rnberg)