From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <53FDCADE.3040601@ti.com> Date: Wed, 27 Aug 2014 15:11:10 +0300 From: Roger Quadros MIME-Version: 1.0 To: , CC: , , , , , , "[3.8+]" Subject: [PATCH v2] usb: hub: Prevent hub autosuspend if usbcore.autosuspend is -1 References: <1407145486-14013-1-git-send-email-rogerq@ti.com> In-Reply-To: <1407145486-14013-1-git-send-email-rogerq@ti.com> Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: If user specifies that USB autosuspend must be disabled by module parameter "usbcore.autosuspend=-1" then we must prevent autosuspend of USB hub devices as well. commit 596d789a211d introduced in v3.8 changed the original behaivour and stopped respecting the usbcore.autosuspend parameter for hubs. Fixes: 596d789a211d "USB: set hub's default autosuspend delay as 0" Cc: [3.8+] Signed-off-by: Roger Quadros --- drivers/usb/core/hub.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8a4dcbc..59b599d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1728,8 +1728,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) * - Change autosuspend delay of hub can avoid unnecessary auto * suspend timer for hub, also may decrease power consumption * of USB bus. + * + * - If user has indicated to prevent autosuspend by passing + * usbcore.autosuspend = -1 then keep autosuspend disabled. */ - pm_runtime_set_autosuspend_delay(&hdev->dev, 0); +#ifdef CONFIG_PM_RUNTIME + if (hdev->dev.power.autosuspend_delay >= 0) + pm_runtime_set_autosuspend_delay(&hdev->dev, 0); +#endif /* * Hubs have proper suspend/resume support, except for root hubs -- 1.8.3.2